kernel/arch/powerpc/include/asm/opal-api.h, branch linux-5.1.y

powerpc/powernv: Make possible for user to force a full ipl cec reboot

2018-10-03T05:39:45Z

Ever since fast reboot is enabled by default in opal, opal_cec_reboot() will use fast-reset instead of full IPL to perform system reboot. This leaves the user with no direct way to force a full IPL reboot except changing an nvram setting that persistently disables fast-reset for all subsequent reboots. This patch provides a more direct way for the user to force a one-shot full IPL reboot by passing the command line argument 'full' to the reboot command. So the user will be able to tweak the reboot behavior via: $ sudo reboot full # Force a full ipl reboot skipping fast-reset or $ sudo reboot # default reboot path (usually fast-reset) The reboot command passes the un-parsed command argument to the kernel via the 'Reboot' syscall which is then passed on to the arch function pnv_restart(). The patch updates pnv_restart() to handle this cmd-arg and issues opal_cec_reboot2 with OPAL_REBOOT_FULL_IPL to force a full IPL reset. Signed-off-by: Vaibhav Jain Acked-by: Andrew Donnellan Signed-off-by: Michael Ellerman

crypto/nx: Initialize 842 high and normal RxFIFO control registers

2018-08-07T14:32:34Z

NX increments readOffset by FIFO size in receive FIFO control register when CRB is read. But the index in RxFIFO has to match with the corresponding entry in FIFO maintained by VAS in kernel. Otherwise NX may be processing incorrect CRBs and can cause CRB timeout. VAS FIFO offset is 0 when the receive window is opened during initialization. When the module is reloaded or in kexec boot, readOffset in FIFO control register may not match with VAS entry. This patch adds nx_coproc_init OPAL call to reset readOffset and queued entries in FIFO control register for both high and normal FIFOs. Signed-off-by: Haren Myneni [mpe: Fixup uninitialized variable warning] Signed-off-by: Michael Ellerman

powerpc/powernv: Add support to enable sensor groups

2018-07-31T09:56:45Z

Adds support to enable/disable a sensor group at runtime. This can be used to select the sensor groups that needs to be copied to main memory by OCC. Sensor groups like power, temperature, current, voltage, frequency, utilization can be enabled/disabled at runtime. Signed-off-by: Shilpasri G Bhat Signed-off-by: Michael Ellerman

powerpc/powernv: call OPAL_QUIESCE before OPAL_SIGNAL_SYSTEM_RESET

2018-06-03T10:40:30Z

Although it is often possible to recover a CPU that was interrupted from OPAL with a system reset NMI, it's undesirable to interrupt them for a few reasons. Firstly because dump/debug code itself needs to call firmware, so it could hang on a lock or possibly corrupt a per-cpu data structure if it or another CPU was interrupted from OPAL. Secondly, the kexec crash dump code will not return from interrupt to unwind the OPAL call. Call OPAL_QUIESCE with QUIESCE_HOLD before sending an NMI IPI to another CPU, which wait for it to leave firmware (or time out) to avoid this problem in normal conditions. Firmware bugs may still result in a timeout and interrupting OPAL, but that is the best option (stops the CPU, and possibly allows firmware to be debugged). Signed-off-by: Nicholas Piggin Signed-off-by: Michael Ellerman

powernv: opal-sensor: Add support to read 64bit sensor values

2018-05-21T04:48:02Z

This patch adds support to read 64-bit sensor values. This method is used to read energy sensors and counters which are of type u64. Signed-off-by: Shilpasri G Bhat Signed-off-by: Michael Ellerman

powerpc/powernv: Enable tunneled operations

2018-03-13T04:50:30Z

P9 supports PCI tunneled operations (atomics and as_notify). This patch adds support for tunneled operations on powernv, with a new API, to be called by device drivers: pnv_pci_enable_tunnel() Enable tunnel operations, tell driver the 16-bit ASN indication used by kernel. pnv_pci_disable_tunnel() Disable tunnel operations. pnv_pci_set_tunnel_bar() Tell kernel the Tunnel BAR Response address used by driver. This function uses two new OPAL calls, as the PBCQ Tunnel BAR register is configured by skiboot. pnv_pci_get_as_notify_info() Return the ASN info of the thread to be woken up. Signed-off-by: Philippe Bergheaud Reviewed-by: Frederic Barrat Reviewed-by: Christophe Lombard Signed-off-by: Michael Ellerman

Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2018-02-10T21:16:35Z

Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...

powerpc/powernv: Add opal calls for opencapi

2018-01-24T00:42:56Z

Add opal calls to interact with the NPU: OPAL_NPU_SPA_SETUP: set the Shared Process Area (SPA) The SPA is a table containing one entry (Process Element) per memory context which can be accessed by the opencapi device. OPAL_NPU_SPA_CLEAR_CACHE: clear the context cache The NPU keeps a cache of recently accessed memory contexts. When a Process Element is removed from the SPA, the cache for the link must be cleared. OPAL_NPU_TL_SET: configure the Transaction Layer The Transaction Layer specification defines several templates for messages to be exchanged on the link. During link setup, the host and device must negotiate what templates are supported on both sides and at what rates those messages can be sent. Signed-off-by: Frederic Barrat Acked-by: Andrew Donnellan Signed-off-by: Michael Ellerman

KVM: PPC: Book3S HV: Enable use of the new XIVE "single escalation" feature

2018-01-19T01:10:21Z

That feature, provided by Power9 DD2.0 and later, when supported by newer OPAL versions, allows us to sacrifice a queue (priority 7) in favor of merging all the escalation interrupts of the queues of a single VP into a single interrupt. This reduces the number of host interrupts used up by KVM guests especially when those guests use multiple priorities. It will also enable a future change to control the masking of the escalation interrupts more precisely to avoid spurious ones. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras

powerpc/powernv: Enable TM without suspend if possible

2017-10-20T22:33:05Z

Some Power9 revisions can run in a mode where TM operates without suspended state. If we find ourself on a CPU that might be in this mode, we query OPAL to check, and if so we reenable TM in CPU features, and enable a new user feature to signal to userspace that we are in this mode. We do not enable the "normal" user feature, PPC_FEATURE2_HTM, but we do enable PPC_FEATURE2_HTM_NOSC because that indicates to userspace that the kernel will abort transactions on syscall entry, which is true regardless of the suspend mode. Signed-off-by: Michael Ellerman