kernel/arch/powerpc/include/asm/opal-api.h, branch linux-4.16.y

Merge tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2018-02-10T21:16:35Z

Pull KVM updates from Radim Krčmář: "ARM: - icache invalidation optimizations, improving VM startup time - support for forwarded level-triggered interrupts, improving performance for timers and passthrough platform devices - a small fix for power-management notifiers, and some cosmetic changes PPC: - add MMIO emulation for vector loads and stores - allow HPT guests to run on a radix host on POWER9 v2.2 CPUs without requiring the complex thread synchronization of older CPU versions - improve the handling of escalation interrupts with the XIVE interrupt controller - support decrement register migration - various cleanups and bugfixes. s390: - Cornelia Huck passed maintainership to Janosch Frank - exitless interrupts for emulated devices - cleanup of cpuflag handling - kvm_stat counter improvements - VSIE improvements - mm cleanup x86: - hypervisor part of SEV - UMIP, RDPID, and MSR_SMI_COUNT emulation - paravirtualized TLB shootdown using the new KVM_VCPU_PREEMPTED bit - allow guests to see TOPOEXT, GFNI, VAES, VPCLMULQDQ, and more AVX512 features - show vcpu id in its anonymous inode name - many fixes and cleanups - per-VCPU MSR bitmaps (already merged through x86/pti branch) - stable KVM clock when nesting on Hyper-V (merged through x86/hyperv)" * tag 'kvm-4.16-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (197 commits) KVM: PPC: Book3S: Add MMIO emulation for VMX instructions KVM: PPC: Book3S HV: Branch inside feature section KVM: PPC: Book3S HV: Make HPT resizing work on POWER9 KVM: PPC: Book3S HV: Fix handling of secondary HPTEG in HPT resizing code KVM: PPC: Book3S PR: Fix broken select due to misspelling KVM: x86: don't forget vcpu_put() in kvm_arch_vcpu_ioctl_set_sregs() KVM: PPC: Book3S PR: Fix svcpu copying with preemption enabled KVM: PPC: Book3S HV: Drop locks before reading guest memory kvm: x86: remove efer_reload entry in kvm_vcpu_stat KVM: x86: AMD Processor Topology Information x86/kvm/vmx: do not use vm-exit instruction length for fast MMIO when running nested kvm: embed vcpu id to dentry of vcpu anon inode kvm: Map PFN-type memory regions as writable (if possible) x86/kvm: Make it compile on 32bit and with HYPYERVISOR_GUEST=n KVM: arm/arm64: Fixup userspace irqchip static key optimization KVM: arm/arm64: Fix userspace_irqchip_in_use counting KVM: arm/arm64: Fix incorrect timer_is_pending logic MAINTAINERS: update KVM/s390 maintainers MAINTAINERS: add Halil as additional vfio-ccw maintainer MAINTAINERS: add David as a reviewer for KVM/s390 ...

powerpc/powernv: Add opal calls for opencapi

2018-01-24T00:42:56Z

Add opal calls to interact with the NPU: OPAL_NPU_SPA_SETUP: set the Shared Process Area (SPA) The SPA is a table containing one entry (Process Element) per memory context which can be accessed by the opencapi device. OPAL_NPU_SPA_CLEAR_CACHE: clear the context cache The NPU keeps a cache of recently accessed memory contexts. When a Process Element is removed from the SPA, the cache for the link must be cleared. OPAL_NPU_TL_SET: configure the Transaction Layer The Transaction Layer specification defines several templates for messages to be exchanged on the link. During link setup, the host and device must negotiate what templates are supported on both sides and at what rates those messages can be sent. Signed-off-by: Frederic Barrat Acked-by: Andrew Donnellan Signed-off-by: Michael Ellerman

KVM: PPC: Book3S HV: Enable use of the new XIVE "single escalation" feature

2018-01-19T01:10:21Z

That feature, provided by Power9 DD2.0 and later, when supported by newer OPAL versions, allows us to sacrifice a queue (priority 7) in favor of merging all the escalation interrupts of the queues of a single VP into a single interrupt. This reduces the number of host interrupts used up by KVM guests especially when those guests use multiple priorities. It will also enable a future change to control the masking of the escalation interrupts more precisely to avoid spurious ones. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras

powerpc/powernv: Enable TM without suspend if possible

2017-10-20T22:33:05Z

Some Power9 revisions can run in a mode where TM operates without suspended state. If we find ourself on a CPU that might be in this mode, we query OPAL to check, and if so we reenable TM in CPU features, and enable a new user feature to signal to userspace that we are in this mode. We do not enable the "normal" user feature, PPC_FEATURE2_HTM, but we do enable PPC_FEATURE2_HTM_NOSC because that indicates to userspace that the kernel will abort transactions on syscall entry, which is true regardless of the suspend mode. Signed-off-by: Michael Ellerman

powerpc/powernv: Implement NMI IPI with OPAL_SIGNAL_SYSTEM_RESET

2017-10-04T00:27:27Z

This allows MSR[EE]=0 lockups to be detected on an OPAL (bare metal) system similarly to the hcall NMI IPI on pseries guests, when the platform/firmware supports it. This is an example of CPU10 spinning with interrupts hard disabled: Watchdog CPU:32 detected Hard LOCKUP other CPUS:10 Watchdog CPU:10 Hard LOCKUP CPU: 10 PID: 4410 Comm: bash Not tainted 4.13.0-rc7-00074-ge89ce1f89f62-dirty #34 task: c0000003a82b4400 task.stack: c0000003af55c000 NIP: c0000000000a7b38 LR: c000000000659044 CTR: c0000000000a7b00 REGS: c00000000fd23d80 TRAP: 0100 Not tainted (4.13.0-rc7-00074-ge89ce1f89f62-dirty) MSR: 90000000000c1033 CR: 28422222 XER: 20000000 CFAR: c0000000000a7b38 SOFTE: 0 GPR00: c000000000659044 c0000003af55fbb0 c000000001072a00 0000000000000078 GPR04: c0000003c81b5c80 c0000003c81cc7e8 9000000000009033 0000000000000000 GPR08: 0000000000000000 c0000000000a7b00 0000000000000001 9000000000001003 GPR12: c0000000000a7b00 c00000000fd83200 0000000010180df8 0000000010189e60 GPR16: 0000000010189ed8 0000000010151270 000000001018bd88 000000001018de78 GPR20: 00000000370a0668 0000000000000001 00000000101645e0 0000000010163c10 GPR24: 00007fffd14d6294 00007fffd14d6290 c000000000fba6f0 0000000000000004 GPR28: c000000000f351d8 0000000000000078 c000000000f4095c 0000000000000000 NIP [c0000000000a7b38] sysrq_handle_xmon+0x38/0x40 LR [c000000000659044] __handle_sysrq+0xe4/0x270 Call Trace: [c0000003af55fbd0] [c000000000659044] __handle_sysrq+0xe4/0x270 [c0000003af55fc70] [c000000000659810] write_sysrq_trigger+0x70/0xa0 [c0000003af55fca0] [c0000000003da650] proc_reg_write+0xb0/0x110 [c0000003af55fcf0] [c0000000003423bc] __vfs_write+0x6c/0x1b0 [c0000003af55fd90] [c000000000344398] vfs_write+0xd8/0x240 [c0000003af55fde0] [c00000000034632c] SyS_write+0x6c/0x110 [c0000003af55fe30] [c00000000000b220] system_call+0x58/0x6c Signed-off-by: Nicholas Piggin [mpe: Use kernel types for opal_signal_system_reset()] Signed-off-by: Michael Ellerman

powerpc/powernv: Add support to clear sensor groups data

2017-08-10T12:40:05Z

Adds support for clearing different sensor groups. OCC inband sensor groups like CSM, Profiler, Job Scheduler can be cleared using this driver. The min/max of all sensors belonging to these sensor groups will be cleared. Signed-off-by: Shilpasri G Bhat Signed-off-by: Michael Ellerman

powerpc/powernv: Add support to set power-shifting-ratio

2017-08-10T12:40:01Z

This patch adds support to set power-shifting-ratio which hints the firmware how to distribute/throttle power between different entities in a system (e.g CPU v/s GPU). This ratio is used by OCC for power capping algorithm. Signed-off-by: Shilpasri G Bhat Signed-off-by: Michael Ellerman

powerpc/powernv: Add support for powercap framework

2017-08-10T12:39:53Z

Adds a generic powercap framework to change the system powercap inband through OPAL-OCC command/response interface. Signed-off-by: Shilpasri G Bhat Signed-off-by: Michael Ellerman

powerpc/powernv: Enable PCI peer-to-peer

2017-08-08T01:27:30Z

P9 has support for PCI peer-to-peer, enabling a device to write in the MMIO space of another device directly, without interrupting the CPU. This patch adds support for it on powernv, by adding a new API to be called by drivers. The pnv_pci_set_p2p(...) call configures an 'initiator', i.e the device which will issue the MMIO operation, and a 'target', i.e. the device on the receiving side. P9 really only supports MMIO stores for the time being but that's expected to change in the future, so the API allows to define both load and store operations. /* PCI p2p descriptor */ #define OPAL_PCI_P2P_ENABLE 0x1 #define OPAL_PCI_P2P_LOAD 0x2 #define OPAL_PCI_P2P_STORE 0x4 int pnv_pci_set_p2p(struct pci_dev *initiator, struct pci_dev *target, u64 desc) It uses a new OPAL call, as the configuration magic is done on the PHBs by skiboot. Signed-off-by: Frederic Barrat Reviewed-by: Russell Currey [mpe: Drop unrelated OPAL calls, s/uint64_t/u64/, minor formatting] Signed-off-by: Michael Ellerman

powerpc/powernv: Add IMC OPAL APIs

2017-07-24T13:00:22Z

In-Memory Collection (IMC) counters are performance monitoring infrastructure. These counters need special sequence of SCOMs to init/start/stop which is handled by OPAL. And OPAL provides three APIs to init and control these IMC engines. OPAL API documentation: https://github.com/open-power/skiboot/blob/master/doc/opal-api/opal-imc-counters.rst Patch updates the kernel side powernv platform code to support the new OPAL APIs Signed-off-by: Hemant Kumar Signed-off-by: Anju T Sudhakar Signed-off-by: Madhavan Srinivasan Signed-off-by: Michael Ellerman