kernel/arch/powerpc/include/asm/mpc5121.h, branch linux-4.3.y

powerpc/512x: clk: support MPC5121/5123/5125 SoC variants

2014-01-12T17:59:36Z

improve the common clock support code for MPC512x - expand the CCM register set declaration with MPC5125 related registers (which reside in the previously "reserved" area) - tell the MPC5121, MPC5123, and MPC5125 SoC variants apart, and derive the availability of components and their clocks from the detected SoC (MBX, AXE, VIU, SPDIF, PATA, SATA, PCI, second FEC, second SDHC, number of PSC components, type of NAND flash controller, interpretation of the CPMF bitfield, PSC/CAN mux0 stage input clocks, output clocks on SoC pins) - add backwards compatibility (allow operation against a device tree which lacks clock related specs) for MPC5125 FECs, too telling SoC variants apart and adjusting the clock tree's generation occurs at runtime, a common generic binary supports all of the chips the MPC5125 approach to the NFC clock (one register with two counters for the high and low periods of the clock) is not implemented, as there are no users and there is no common implementation which supports this kind of clock -- the new implementation would be unused and could not get verified, so it shall wait until there is demand Signed-off-by: Gerhard Sittig Acked-by: Mike Turquette Signed-off-by: Anatolij Gustschin

powerpc: mpc512x: array decl for MCLK registers in CCM

2013-08-23T21:41:55Z

reword the clock control module's registers declaration such that the MCLK related registers form an array and get indexed by PSC controller or CAN controller component number this change is in preparation to COMMON_CLK support for the MPC512x platform, the changed declaration remains neutral to existing code since the PSC and MSCAN CCR fields declared here aren't referenced elsewhere Signed-off-by: Gerhard Sittig Signed-off-by: Anatolij Gustschin

powerpc/mpc512x: move common code to shared.c file

2013-05-21T08:58:39Z

- implement all of the init, init early, and setup arch routines in the shared source file for the MPC512x PowerPC platform, and make all MPC512x based boards (ADS, PDM, generic) use those common routines - remove declarations from header files for routines which aren't referenced from external callers any longer this modification concentrates knowledge about the optional FSL DIU support in one spot within the shared code, and makes all boards benefit transparently from future improvements in the shared platform code the change does not modify any behaviour but preserves all code paths Signed-off-by: Gerhard Sittig Signed-off-by: Anatolij Gustschin

powerpc/mpc512x: fix sparce warnings for non static symbols

2013-02-05T07:40:35Z

Fix warnings: symbol 'clockctl' was not declared. Should it be static? symbol 'rate_clks' was not declared. Should it be static? symbol 'dev_clks' was not declared. Should it be static? symbol 'mpc5121_clk_init' was not declared. Should it be static? Signed-off-by: Anatolij Gustschin

powerpc/512x: add function for chip select parameter configuration

2013-02-04T23:29:26Z

Add ability to configure chip select (CS) parameters for devices that need different CS parameters setup after their configuration. I.e. an FPGA device on LP bus can require different CS parameters for its bus interface after loading firmware into it. A driver can easily reconfigure the LPC CS parameters using this function. Acked-by: Timur Tabi Signed-off-by: Anatolij Gustschin

powerpc/5121: shared DIU framebuffer support

2010-08-01T23:06:44Z

MPC5121 DIU configuration/setup as initialized by the boot loader currently will get lost while booting Linux. As a result displaying the boot splash is not possible through the boot process. To prevent this we reserve configured DIU frame buffer address range while booting and preserve AOI descriptor and gamma table so that DIU continues displaying through the whole boot process. On first open from user space DIU frame buffer driver releases the reserved frame buffer area and continues to operate as usual. Signed-off-by: John Rigby Signed-off-by: Anatolij Gustschin Acked-by: Timur Tabi Signed-off-by: Grant Likely

powerpc/mpc5121: Add machine restart support

2010-02-16T17:36:26Z

Add reset module registers representation and machine restart callback for mpc5121 platform. Signed-off-by: Piotr Ziecik Signed-off-by: Wolfgang Denk Signed-off-by: Anatolij Gustschin Reviewed-by: Wolfram Sang Signed-off-by: Grant Likely