kernel/arch/powerpc/include/asm/io.h, branch linux-5.2.y

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32Z

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

powerpc/mmiowb: Hook up mmwiob() implementation to asm-generic code

2019-04-08T11:00:35Z

In a bid to kill off explicit mmiowb() usage in driver code, hook up the asm-generic mmiowb() tracking code but provide a definition of arch_mmiowb_state() so that the tracking data can remain in the paca as it does at present This replaces the existing (flawed) implementation. Acked-by: Michael Ellerman Acked-by: Linus Torvalds Signed-off-by: Will Deacon

iomap: introduce io{read|write}64_{lo_hi|hi_lo}

2019-01-22T12:39:59Z

In order to provide non-atomic functions for io{read|write}64 that will use readq and writeq when appropriate. We define a number of variants of these functions in the generic iomap that will do non-atomic operations on pio but atomic operations on mmio. These functions are only defined if readq and writeq are defined. If they are not, then the wrappers that always use non-atomic operations from include/linux/io-64-nonatomic*.h will be used. Signed-off-by: Logan Gunthorpe Reviewed-by: Andy Shevchenko Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Michael Ellerman Cc: Arnd Bergmann Cc: Suresh Warrier Cc: Nicholas Piggin Signed-off-by: Greg Kroah-Hartman

powerpc: implement CONFIG_DEBUG_VIRTUAL

2018-12-19T07:56:26Z

This patch implements CONFIG_DEBUG_VIRTUAL to warn about incorrect use of virt_to_phys() and page_to_phys() Below is the result of test_debug_virtual: [ 1.438746] WARNING: CPU: 0 PID: 1 at ./arch/powerpc/include/asm/io.h:808 test_debug_virtual_init+0x3c/0xd4 [ 1.448156] CPU: 0 PID: 1 Comm: swapper Not tainted 4.20.0-rc5-00560-g6bfb52e23a00-dirty #532 [ 1.457259] NIP: c066c550 LR: c0650ccc CTR: c066c514 [ 1.462257] REGS: c900bdb0 TRAP: 0700 Not tainted (4.20.0-rc5-00560-g6bfb52e23a00-dirty) [ 1.471184] MSR: 00029032 CR: 48000422 XER: 20000000 [ 1.477811] [ 1.477811] GPR00: c0650ccc c900be60 c60d0000 00000000 006000c0 c9000000 00009032 c7fa0020 [ 1.477811] GPR08: 00002400 00000001 09000000 00000000 c07b5d04 00000000 c00037d8 00000000 [ 1.477811] GPR16: 00000000 00000000 00000000 00000000 c0760000 c0740000 00000092 c0685bb0 [ 1.477811] GPR24: c065042c c068a734 c0685b8c 00000006 00000000 c0760000 c075c3c0 ffffffff [ 1.512711] NIP [c066c550] test_debug_virtual_init+0x3c/0xd4 [ 1.518315] LR [c0650ccc] do_one_initcall+0x8c/0x1cc [ 1.523163] Call Trace: [ 1.525595] [c900be60] [c0567340] 0xc0567340 (unreliable) [ 1.530954] [c900be90] [c0650ccc] do_one_initcall+0x8c/0x1cc [ 1.536551] [c900bef0] [c0651000] kernel_init_freeable+0x1f4/0x2cc [ 1.542658] [c900bf30] [c00037ec] kernel_init+0x14/0x110 [ 1.547913] [c900bf40] [c000e1d0] ret_from_kernel_thread+0x14/0x1c [ 1.553971] Instruction dump: [ 1.556909] 3ca50100 bfa10024 54a5000e 3fa0c076 7c0802a6 3d454000 813dc204 554893be [ 1.564566] 7d294010 7d294910 90010034 39290001 <0f090000> 7c3e0b78 955e0008 3fe0c062 [ 1.572425] ---[ end trace 6f6984225b280ad6 ]--- [ 1.577467] PA: 0x09000000 for VA: 0xc9000000 [ 1.581799] PA: 0x061e8f50 for VA: 0xc61e8f50 Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

powerpc/io: Fix the IO workarounds code to work with Radix

2018-11-12T02:22:10Z

Back in 2006 Ben added some workarounds for a misbehaviour in the Spider IO bridge used on early Cell machines, see commit 014da7ff47b5 ("[POWERPC] Cell "Spider" MMIO workarounds"). Later these were made to be generic, ie. not tied specifically to Spider. The code stashes a token in the high bits (59-48) of virtual addresses used for IO (eg. returned from ioremap()). This works fine when using the Hash MMU, but when we're using the Radix MMU the bits used for the token overlap with some of the bits of the virtual address. This is because the maximum virtual address is larger with Radix, up to c00fffffffffffff, and in fact we use that high part of the address range for ioremap(), see RADIX_KERN_IO_START. As it happens the bits that are used overlap with the bits that differentiate an IO address vs a linear map address. If the resulting address lies outside the linear mapping we will crash (see below), if not we just corrupt memory. virtio-pci 0000:00:00.0: Using 64-bit direct DMA at offset 800000000000000 Unable to handle kernel paging request for data at address 0xc000000080000014 ... CFAR: c000000000626b98 DAR: c000000080000014 DSISR: 42000000 IRQMASK: 0 GPR00: c0000000006c54fc c00000003e523378 c0000000016de600 0000000000000000 GPR04: c00c000080000014 0000000000000007 0fffffff000affff 0000000000000030 ^^^^ ... NIP [c000000000626c5c] .iowrite8+0xec/0x100 LR [c0000000006c992c] .vp_reset+0x2c/0x90 Call Trace: .pci_bus_read_config_dword+0xc4/0x120 (unreliable) .register_virtio_device+0x13c/0x1c0 .virtio_pci_probe+0x148/0x1f0 .local_pci_probe+0x68/0x140 .pci_device_probe+0x164/0x220 .really_probe+0x274/0x3b0 .driver_probe_device+0x80/0x170 .__driver_attach+0x14c/0x150 .bus_for_each_dev+0xb8/0x130 .driver_attach+0x34/0x50 .bus_add_driver+0x178/0x2f0 .driver_register+0x90/0x1a0 .__pci_register_driver+0x6c/0x90 .virtio_pci_driver_init+0x2c/0x40 .do_one_initcall+0x64/0x280 .kernel_init_freeable+0x36c/0x474 .kernel_init+0x24/0x160 .ret_from_kernel_thread+0x58/0x7c This hasn't been a problem because CONFIG_PPC_IO_WORKAROUNDS which enables this code is usually not enabled. It is only enabled when it's selected by PPC_CELL_NATIVE which is only selected by PPC_IBM_CELL_BLADE and that in turn depends on BIG_ENDIAN. So in order to hit the bug you need to build a big endian kernel, with IBM Cell Blade support enabled, as well as Radix MMU support, and then boot that on Power9 using Radix MMU. Still we can fix the bug, so let's do that. We simply use fewer bits for the token, taking the union of the restrictions on the address from both Hash and Radix, we end up with 8 bits we can use for the token. The only user of the token is iowa_mem_find_bus() which only supports 8 token values, so 8 bits is plenty for that. Fixes: 566ca99af026 ("powerpc/mm/radix: Add dummy radix_enabled()") Signed-off-by: Michael Ellerman

powerpc/io: remove old GCC version implementation

2018-10-18T13:56:17Z

GCC 4.6 is the minimum supported now. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

powerpc: handover page flags with a pgprot_t parameter

2018-10-14T07:04:09Z

In order to avoid multiple conversions, handover directly a pgprot_t to map_kernel_page() as already done for radix. Do the same for __ioremap_caller() and __ioremap_at(). Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

powerpc/32: Add ioremap_wt() and ioremap_coherent()

2018-10-13T11:21:25Z

Other arches have ioremap_wt() to map IO areas write-through. Implement it on PPC as well in order to avoid drivers using __ioremap(_PAGE_WRITETHRU) Also implement ioremap_coherent() to avoid drivers using __ioremap(_PAGE_COHERENT) Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman

powerpc/io: Add __raw_writeq_be() __raw_rm_writeq_be()

2018-05-18T11:59:56Z

Add byte-swapping versions of __raw_writeq() and __raw_rm_writeq(). This allows us to avoid sparse warnings caused by passing __be64 to __raw_writeq(), which takes unsigned long: arch/powerpc/platforms/powernv/pci-ioda.c:1981:38: warning: incorrect type in argument 1 (different base types) expected unsigned long [unsigned] v got restricted __be64 [usertype] It's also generally preferable to use a byte-swapping accessor rather than doing it by hand in the code, which is more bug prone. Signed-off-by: Michael Ellerman Reviewed-by: Samuel Mendoza-Jonas

powerpc: io.h: move iomap.h include so that it can use readq/writeq defs

2018-04-05T04:58:52Z

Subsequent patches in this series makes use of the readq and writeq defines in iomap.h. However, as is, they get missed on the powerpc platform seeing the include comes before the define. This patch moves the include down to fix this. Signed-off-by: Logan Gunthorpe Reviewed-by: Andy Shevchenko Signed-off-by: Michael Ellerman