kernel/arch/powerpc/boot/dts, branch linux-4.3.y

powerpc/t1023rdb/dts: set ifc nand chip select from 2 to 1

2015-08-18T00:41:16Z

IFC NAND chip select is wrongly mapped to 2 in reg property of NAND node. Due to this kernel is not able probe NAND flash. Set chip select to 1 in reg property. Signed-off-by: Jaiprakash Singh Signed-off-by: Shengzhou Liu Signed-off-by: Scott Wood

powerpc/mpc85xx:Add SCFG device tree support of T104x

2015-08-18T00:33:22Z

Signed-off-by: Wang Dongsheng Signed-off-by: Scott Wood

powerpc/fsl-booke: Add T1040D4RDB/T1042D4RDB board support

2015-08-17T23:58:10Z

T1040D4RDB/T1042D4RDB are Freescale Reference Design Board which can support T1040/T1042 QorIQ Power Architecture™ processor respectively T1040D4RDB/T1042D4RDB board Overview ------------------------------------- - SERDES Connections, 8 lanes supporting: - PCI - SGMII - SATA 2.0 - QSGMII(only for T1040D4RDB) - DDR Controller - Supports rates of up to 1600 MHz data-rate - Supports one DDR4 UDIMM -IFC/Local Bus - NAND flash: 1GB 8-bit NAND flash - NOR: 128MB 16-bit NOR Flash - Ethernet - Two on-board RGMII 10/100/1G ethernet ports. - PHY #0 remains powered up during deep-sleep - CPLD - Clocks - System and DDR clock (SYSCLK, “DDRCLK”) - SERDES clocks - Power Supplies - USB - Supports two USB 2.0 ports with integrated PHYs - Two type A ports with 5V@1.5A per port. - SDHC - SDHC/SDXC connector - SPI - On-board 64MB SPI flash - I2C - Devices connected: EEPROM, thermal monitor, VID controller - Other IO - Two Serial ports - ProfiBus port Add support for T1040/T1042D4RDB board: -add device tree -Add entry in corenet_generic.c Signed-off-by: Priyanka Jain Signed-off-by: Scott Wood

powerpc: Add a vga alias node for P1022

2015-08-17T23:52:33Z

In u-boot, when set the video as console, the name 'vga' is used as a general name for the video device, during the fdt_fixup_stdout process, the 'vga' name is used to search in the dtb to setup the 'linux,stdout-path' node. Though the P1022 DIU is not VGA-compatible device, to meet the 'vga' name used in u-boot, the vga alias node is added for P1022 in this patch. At the same time, a display alias is also added so that no other components grow dependencies on the vga alias node. Signed-off-by: Jason Jin Signed-off-by: Wang Dongsheng Signed-off-by: Scott Wood

powerpc/t1023rdb: add ina220 current sensor node

2015-08-08T03:59:32Z

Add support for INA220 current sensor. Signed-off-by: Shengzhou Liu Signed-off-by: Scott Wood

powerpc/t1024rdb: add ina220 current sensor node

2015-08-08T03:59:32Z

Add support for INA220 current sensor. Signed-off-by: Shengzhou Liu Signed-off-by: Scott Wood

Merge tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux

2015-06-24T15:46:32Z

Pull powerpc updates from Michael Ellerman: - disable the 32-bit vdso when building LE, so we can build with a 64-bit only toolchain. - EEH fixes from Gavin & Richard. - enable the sys_kcmp syscall from Laurent. - sysfs control for fastsleep workaround from Shreyas. - expose OPAL events as an irq chip by Alistair. - MSI ops moved to pci_controller_ops by Daniel. - fix for kernel to userspace backtraces for perf from Anton. - merge pseries and pseries_le defconfigs from Cyril. - CXL in-kernel API from Mikey. - OPAL prd driver from Jeremy. - fix for DSCR handling & tests from Anshuman. - Powernv flash mtd driver from Cyril. - dynamic DMA Window support on powernv from Alexey. - LLVM clang fixes & workarounds from Anton. - reworked version of the patch to abort syscalls when transactional. - fix the swap encoding to support 4TB, from Aneesh. - various fixes as usual. - Freescale updates from Scott: Highlights include more 8xx optimizations, an e6500 hugetlb optimization, QMan device tree nodes, t1024/t1023 support, and various fixes and cleanup. * tag 'powerpc-4.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (180 commits) cxl: Fix typo in debug print cxl: Add CXL_KERNEL_API config option powerpc/powernv: Fix wrong IOMMU table in pnv_ioda_setup_bus_dma() powerpc/mm: Change the swap encoding in pte. powerpc/mm: PTE_RPN_MAX is not used, remove the same powerpc/tm: Abort syscalls in active transactions powerpc/iommu/ioda2: Enable compile with IOV=on and IOMMU_API=off powerpc/include: Add opal-prd to installed uapi headers powerpc/powernv: fix construction of opal PRD messages powerpc/powernv: Increase opal-irqchip initcall priority powerpc: Make doorbell check preemption safe powerpc/powernv: pnv_init_idle_states() should only run on powernv macintosh/nvram: Remove as unused powerpc: Don't use gcc specific options on clang powerpc: Don't use -mno-strict-align on clang powerpc: Only use -mtraceback=no, -mno-string and -msoft-float if toolchain supports it powerpc: Only use -mabi=altivec if toolchain supports it powerpc: Fix duplicate const clang warning in user access code vfio: powerpc/spapr: Support Dynamic DMA windows vfio: powerpc/spapr: Register memory and define IOMMU v2 ...

powerpc/mpc85xx: Add FSL QorIQ DPAA QMan support to device tree(s)

2015-06-03T02:37:24Z

Signed-off-by: Kumar Gala Signed-off-by: Geoff Thorpe Signed-off-by: Hai-Ying Wang Signed-off-by: Chunhe Lan Signed-off-by: Poonam Aggrwal [Emil Medve: Sync with the upstream binding] Signed-off-by: Emil Medve [Scott Wood: s/fsl,qman-channel-id/cell-index] Signed-off-by: Scott Wood Cc: Madalin-Cristian Bucur

powerpc/dts: Fix incorrect clock-names property

2015-06-03T02:37:22Z

Signed-off-by: Igal Liberman Signed-off-by: Scott Wood

powerpc/fsl-booke: Add T1023 RDB board support

2015-06-03T02:37:21Z

T1023RDB is a Freescale Reference Design Board that hosts T1023 SoC. T1023RDB board Overview ----------------------- - T1023 SoC integrating two 64-bit e5500 cores up to 1.4GHz - CoreNet fabric supporting coherent and noncoherent transactions with prioritization and bandwidth allocation - Memory: 2GB Micron MT40A512M8HX unbuffered 32-bit fixed DDR4 without ECC - Accelerator: DPAA components consist of FMan, BMan, QMan, DCE and SEC - Ethernet interfaces: - one 1G RGMII port on-board(RTL8211F PHY) - one 1G SGMII port on-board(RTL8211F PHY) - one 2.5G SGMII port on-board(AQR105 PHY) - PCIe: Two Mini-PCIe connectors on-board. - SerDes: 4 lanes up to 10.3125GHz - NOR: 128MB S29GL01GS110TFIV10 Spansion NOR Flash - NAND: 512MB S34MS04G200BFI000 Spansion NAND Flash - eSPI: 64MB S25FL512SAGMFI010 Spansion SPI flash - USB: one Type-A USB 2.0 port with internal PHY - eSDHC: support SD/MMC card and eMMC flash on-board - 256Kbit M24256 I2C EEPROM - RTC: Real-time clock DS1339 on I2C bus - UART: one serial port on-board with RJ45 connector - Debugging: JTAG/COP for T1023 debugging Signed-off-by: Shengzhou Liu Signed-off-by: Scott Wood