kernel/arch/powerpc/boot/dts/mpc8572ds.dts, branch linux-4.3.y

powerpc/85xx: Rework MPC8572DS device tree

2011-11-24T08:01:37Z

Utilize new split between board & SoC, and new SoC device trees split into pre & post utilizing 'template' includes for SoC IP blocks. Other changes include: * Moved to specifying interrupt-parent for mpic at root * Moved to 4-cell mpic interrupt cells to support MPIC timers * Removed CPU properties setup by u-boot to match other .dts * Reworked PCIe nodes to allow supportin IRQs for controller (errors) and moved PCI device IRQs down to virtual bridge level * Moved mdio nodes up one level instead of under tsec nodes * Added GPIO controller node to MPC8572 SoC template * Dropping "fsl,mpc8572-IP..." from compatibles for standard blocks Signed-off-by: Kumar Gala

ptp: Added a clock that uses the eTSEC found on the MPC85xx.

2011-05-23T20:10:14Z

The eTSEC includes a PTP clock with quite a few features. This patch adds support for the basic clock adjustment functions, plus two external time stamps, one alarm, and the PPS callback. Signed-off-by: Richard Cochran Acked-by: David S. Miller Acked-by: John Stultz Signed-off-by: John Stultz

powerpc/fsl: Removed reg property from 85xx/86xx soc node

2009-05-19T05:50:29Z

Between the addition of the ecm/mcm law nodes and the fact that the get_immrbase() has been using the range property of the SoC to determine the base address of CCSR space we no longer need the reg property at the soc node level. It has been ill specified and varied between device trees to cover either the {e,m}cm-law node, some odd subset of CCSR space or all of CCSR space. Signed-off-by: Kumar Gala

powerpc/85xx: Add new LAW & ECM device tree nodes for all 85xx systems

2009-05-19T05:46:19Z

Signed-off-by: Kumar Gala

powerpc/fsl: Remove cell-index from PCI nodes

2009-05-19T05:46:14Z

The cell-index property isn't used on PCI nodes and is ill defined. Remove it for now and if someone comes up with a good reason and consistent definition for it we can add it back Signed-off-by: Kumar Gala

powerpc/85xx: Move gianfar mdio nodes under the ethernet nodes

2009-03-24T13:35:13Z

Currently it doesn't matter where the mdio nodes are placed, but with power management support (i.e. when sleep = <> properties will take effect), mdio nodes placement will become important: mdio controller is a part of the ethernet block, so the mdio nodes should be placed correctly. Otherwise we may wrongly assume that MDIO controllers are available during sleep. Suggested-by: Scott Wood Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala

powerpc/85xx: Fixed PCI IO region sizes in mpc8572ds*.dts

2009-02-11T06:18:24Z

The PCI IO region sizes where incorrectly set to 1M instead of 64k. Signed-off-by: Kumar Gala

powerpc/85xx: Fix typo in mpc8572ds dts

2009-01-20T15:57:24Z

The localbus node flash had a minor typo for a read-only property. Signed-off-by: Kumar Gala

powerpc/85xx: Fix PCIe error interrupts

2009-01-07T15:18:52Z

The PCIe interrupts for 8544ds and 8572ds were incorrect. The 8572 case was found by Liu Yu. Signed-off-by: Kumar Gala

Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc

2008-12-29T00:54:33Z

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (144 commits) powerpc/44x: Support 16K/64K base page sizes on 44x powerpc: Force memory size to be a multiple of PAGE_SIZE powerpc/32: Wire up the trampoline code for kdump powerpc/32: Add the ability for a classic ppc kernel to be loaded at 32M powerpc/32: Allow __ioremap on RAM addresses for kdump kernel powerpc/32: Setup OF properties for kdump powerpc/32/kdump: Implement crash_setup_regs() using ppc_save_regs() powerpc: Prepare xmon_save_regs for use with kdump powerpc: Remove default kexec/crash_kernel ops assignments powerpc: Make default kexec/crash_kernel ops implicit powerpc: Setup OF properties for ppc32 kexec powerpc/pseries: Fix cpu hotplug powerpc: Fix KVM build on ppc440 powerpc/cell: add QPACE as a separate Cell platform powerpc/cell: fix build breakage with CONFIG_SPUFS disabled powerpc/mpc5200: fix error paths in PSC UART probe function powerpc/mpc5200: add rts/cts handling in PSC UART driver powerpc/mpc5200: Make PSC UART driver update serial errors counters powerpc/mpc5200: Remove obsolete code from mpc5200 MDIO driver powerpc/mpc5200: Add MDMA/UDMA support to MPC5200 ATA driver ... Fix trivial conflict in drivers/char/Makefile as per Paul's directions