kernel/arch/powerpc/boot/dts/mpc836x_rdk.dts, branch linux-4.3.y

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16T11:11:51Z

The device_type property is deprecated for the flattened device tree and the value "ethernet-phy" has never been defined as having a useful meaning. Neither the kernel nor u-boot depend on it. It should never have appeared in PHY bindings. This patch removes all references to "ethernet-phy" as a device_type value from the documentation and the .dts files. This patch was generated mechanically with the following command and then verified by looking at the diff. sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'` Signed-off-by: Grant Likely Acked-by: Srinivas Kandagatla Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Florian Fainelli Cc: Benjamin Herrenschmidt

powerpc/fsl: update compatiable on fsl 16550 uart nodes

2012-01-04T21:38:40Z

The Freescale serial port's are pretty much a 16550, however there are some FSL specific bugs and features. Add a "fsl,ns16550" compatiable string to allow code to handle those FSL specific issues. Signed-off-by: Kumar Gala

powerpc/83xx: Add power management support for MPC83xx QE boards

2009-11-12T03:43:31Z

Simply add power management controller nodes and sleep properties. Signed-off-by: Anton Vorontsov Acked-by: Scott Wood Signed-off-by: Kumar Gala

powerpc/qe: add new qe properties for QE based chips

2009-05-19T05:50:28Z

Add fsl,qe-num-riscs and fsl,qe-num-snums to all the devices trees which have qe node. Signed-off-by: Haiying Wang Signed-off-by: Kumar Gala

powerpc/83xx: Add USB Host support for MPC8360E-RDK boards

2008-12-30T17:13:47Z

Simply add the usb node to support USB host on the MPC8360E-RDK boards. Currently U-Boot doesn't fill the clock-frequency property for timer nodes, so for now we have to fill it manually. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala

powerpc/83xx: add NAND support for the MPC8360E-RDK boards

2008-10-13T16:11:20Z

The StMicro NAND chip (512Mbit, 64MB) is connected to the local bus, the first local bus' user-programmable machine is configured by the firmware to work with NAND chips. QE GPIO pin is used to poll the NAND's Ready-Not-Busy signal. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala

powerpc: 83xx: pci: Remove need for get_immrbase from mpc83xx_add_bridge.

2008-10-13T16:09:58Z

Modify mpc83xx_add_bridge to get config space register base address from the device tree instead of immr + hardcoded offset. 83xx pci nodes have this change: register properties now contain two address length tuples: First is the pci bridge register base, this has always been there. Second is the config base, this is new. This is documented in dts-bindings/fsl/83xx-512x-pci.txt The changes accomplish these things: mpc83xx_add_bridge no longer needs to call get_immrbase it uses hard coded addresses if the second register value is missing Signed-off-by: John Rigby Signed-off-by: Kumar Gala

powerpc/83xx: Add missing cell-index to dma-channel device nodes

2008-09-24T03:05:10Z

Signed-off-by: Kumar Gala

powerpc/fsl: proliferate simple-bus compatibility to soc nodes

2008-07-29T22:48:35Z

add simple-bus compatible property to soc nodes for 83xx/85xx platforms that were missing them. Add same to platform probe code. This fixes SoC device drivers (such as talitos) to succeed in matching devices present in the soc node. also update mpc836x_rdk dts to new SEC bindings (overlooked in commit 3fd4473: powerpc/fsl: update crypto node definition and device tree instances). Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala

powerpc: Add dma nodes to 83xx, 85xx and 86xx boards

2008-06-27T21:04:29Z

Added DMA nodes for the elo/elo-plus DMA engines. Renamed the interrupt controller alias in mpc832x_rdb.dts to ipic so that its the same as all the other boards. Signed-off-by: Kumar Gala