kernel/arch/powerpc/boot/dts/mpc832x_rdb.dts, branch linux-4.3.y

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16T11:11:51Z

The device_type property is deprecated for the flattened device tree and the value "ethernet-phy" has never been defined as having a useful meaning. Neither the kernel nor u-boot depend on it. It should never have appeared in PHY bindings. This patch removes all references to "ethernet-phy" as a device_type value from the documentation and the .dts files. This patch was generated mechanically with the following command and then verified by looking at the diff. sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'` Signed-off-by: Grant Likely Acked-by: Srinivas Kandagatla Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Florian Fainelli Cc: Benjamin Herrenschmidt

powerpc/fsl: update compatiable on fsl 16550 uart nodes

2012-01-04T21:38:40Z

The Freescale serial port's are pretty much a 16550, however there are some FSL specific bugs and features. Add a "fsl,ns16550" compatiable string to allow code to handle those FSL specific issues. Signed-off-by: Kumar Gala

powerpc/83xx: Add power management support for MPC83xx QE boards

2009-11-12T03:43:31Z

Simply add power management controller nodes and sleep properties. Signed-off-by: Anton Vorontsov Acked-by: Scott Wood Signed-off-by: Kumar Gala

powerpc/qe: add new qe properties for QE based chips

2009-05-19T05:50:28Z

Add fsl,qe-num-riscs and fsl,qe-num-snums to all the devices trees which have qe node. Signed-off-by: Haiying Wang Signed-off-by: Kumar Gala

powerpc/fsl: Remove cell-index from PCI nodes

2009-05-19T05:46:14Z

The cell-index property isn't used on PCI nodes and is ill defined. Remove it for now and if someone comes up with a good reason and consistent definition for it we can add it back Signed-off-by: Kumar Gala

powerpc/83xx: add mmc-spi support via the device tree for MPC8323E-RDB

2009-04-01T15:59:23Z

- Add gpio-controller node to manage QE GPIO Bank D; - Add mmc-spi node; - Modify board file so that it won't use legacy SPI support with the new device trees. Signed-off-by: Anton Vorontsov Cc: David Brownell Cc: Benjamin Herrenschmidt Cc: Kumar Gala Cc: Grant Likely Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

powerpc/mpc832x_rdb: fix swapped ethernet ids

2008-11-19T21:12:19Z

ethernet0 (called FSL UEC0 in U-Boot) should be enet1 (UCC3/eth1), and ethernet1 should be enet0 (UCC2/eth0), to be consistent with U-Boot so that the interfaces do not swap addresses when control passes from U-Boot to the kernel. Signed-off-by: Michael Barkowski Acked-by: Kim Phillips Signed-off-by: Kumar Gala

powerpc: 83xx: pci: Remove need for get_immrbase from mpc83xx_add_bridge.

2008-10-13T16:09:58Z

Modify mpc83xx_add_bridge to get config space register base address from the device tree instead of immr + hardcoded offset. 83xx pci nodes have this change: register properties now contain two address length tuples: First is the pci bridge register base, this has always been there. Second is the config base, this is new. This is documented in dts-bindings/fsl/83xx-512x-pci.txt The changes accomplish these things: mpc83xx_add_bridge no longer needs to call get_immrbase it uses hard coded addresses if the second register value is missing Signed-off-by: John Rigby Signed-off-by: Kumar Gala

powerpc/83xx: Add missing cell-index to dma-channel device nodes

2008-09-24T03:05:10Z

Signed-off-by: Kumar Gala

powerpc/fsl: proliferate simple-bus compatibility to soc nodes

2008-07-29T22:48:35Z

add simple-bus compatible property to soc nodes for 83xx/85xx platforms that were missing them. Add same to platform probe code. This fixes SoC device drivers (such as talitos) to succeed in matching devices present in the soc node. also update mpc836x_rdk dts to new SEC bindings (overlooked in commit 3fd4473: powerpc/fsl: update crypto node definition and device tree instances). Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala