kernel/arch/powerpc/boot/dts/mpc8272ads.dts, branch linux-4.3.y

dt/bindings: remove users of device_type "mdio"

2014-01-16T16:25:56Z

device_type is a deprecated property, but some MDIO bus nodes still have it. Except for a couple of old binding (compatible="gianfar" and compatible="ucc_geth_phy") the kernel doesn't look for device_type="mdio" at all. This patch removes all instances of device_type="mdio" from the binding documentation and the .dts files. Signed-off-by: Grant Likely Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Benjamin Herrenschmidt

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16T11:11:51Z

The device_type property is deprecated for the flattened device tree and the value "ethernet-phy" has never been defined as having a useful meaning. Neither the kernel nor u-boot depend on it. It should never have appeared in PHY bindings. This patch removes all references to "ethernet-phy" as a device_type value from the documentation and the .dts files. This patch was generated mechanically with the following command and then verified by looking at the diff. sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'` Signed-off-by: Grant Likely Acked-by: Srinivas Kandagatla Cc: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala Cc: Florian Fainelli Cc: Benjamin Herrenschmidt

powerpc/82xx: Add CPM USB Gadget support for MPC8272ADS boards

2009-08-25T14:44:06Z

- Add usb node; - Configure pins and clocks; - Enable USB function in BCSR. The support was successfully tested using serial and ethernet gadget drivers. Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala

powerpc/mpc8272ads: fix device tree for 8 MB flash size

2009-06-16T02:45:30Z

The current device tree for the MPC8272ADS assumes a mapping of 32 MB of NOR flash at 0xFE00.0000, while there are actually only 8 MB on the boards, mapped at 0xFF80.0000. When booting an uImage with such a device tree, the kernel crashes because 0xFE00.0000 is not mapped. Also introduce aliases for serial[01] and ethernet[01]. Signed-off-by: Wolfgang Denk Cc: Scott Wood Signed-off-by: Kumar Gala

powerpc/fsl: update crypto node definition and device tree instances

2008-07-14T12:55:47Z

delete obsolete device-type property, delete model property (use compatible property instead), prepend "fsl," to Freescale specific properties. Add nodes to device trees that are missing them, and fix broken property values in other trees. Signed-off-by: Kim Phillips Signed-off-by: Kumar Gala

powerpc/CPM: Add i2c pins to dts and board setup

2008-07-14T12:55:39Z

Initialize I2C pins on boards with CPM1/CPM2 controllers and document the i2c bus in booting-without-of. The boards don't have any I2C chips connected to the I2C bus, so unless some external chips are connected to the boards, this code is just an example of setting everything else up. Signed-off-by: Jochen Friedrich Signed-off-by: Kumar Gala

[POWERPC] fsl: Convert dts to v1 syntax

2008-04-17T14:40:48Z

Signed-off-by: Kumar Gala

[POWERPC] mpc8272ads: Remove muram from the CPM reg property.

2007-10-11T14:14:31Z

This is described by the muram node now. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala

[POWERPC] cpm: Describe multi-user ram in its own device node.

2007-10-04T20:47:05Z

The way the current CPM binding describes available multi-user (a.k.a. dual-ported) RAM doesn't work well when there are multiple free regions, and it doesn't work at all if the region doesn't begin at the start of the muram area (as the hardware needs to be programmed with offsets into this area). The latter situation can happen with SMC UARTs on CPM2, as its parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't support moving it. It is now described with a muram node, similar to QE. The current CPM binding is sufficiently recent (i.e. never appeared in an official release) that compatibility with existing device trees is not an issue. The code supporting the new binding is shared between cpm1 and cpm2, rather than remain separated. QE should be able to use this code as well, once minor fixes are made to its device trees. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala

[POWERPC] mpc82xx: Update mpc8272ads, and factor out PCI and reset.

2007-10-04T16:02:44Z

1. PCI and reset are factored out into pq2.c. I renamed them from m82xx to pq2 because they won't work on the Integrated Host Processor line of 82xx chips (i.e. 8240, 8245, and such). 2. The PCI PIC, which is nominally board-specific, is used on multiple boards, and thus is used into pq2ads-pci-pic.c. 3. The new CPM binding is used. 4. General cleanup. Signed-off-by: Scott Wood Signed-off-by: Kumar Gala