kernel/arch/powerpc/boot/dts/lite5200b.dts, branch linux-4.3.y

powerpc/5200: Add Lite5200 on-board LEDs as devices

2013-02-11T21:24:53Z

The Lite5200 evaluation board has a number of debug LEDs that Linux doesn't know about yet. This change adds a gpio-leds stanza to the lite5200 device tree so that the correct driver can get hooked up. Also, make use of the dtc labels feature to reduce the number of source lines required to add the gpio-controller property to the general purpose timer nodes. In addition, the required #gpio-cells properties are added to the common mpc5200b dtsi include file so that each board doesn't need to add them explicitly. This still doesn't enable gpio mode, 'gpio-controller' is required for that, but it means less work needs to be done by board ports. Cc: Anatolij Gustschin Signed-off-by: Grant Likely

powerpc/5200: dts: refactor dts files

2011-01-03T23:02:51Z

This patch creates mpc5200b.dtsi containing the information for the MPC5200b SoC then modifies all of the dts files for MPC5200b based systems to use mpc5200b.dtsi. Signed-off-by: John Bonesio Signed-off-by: Grant Likely

powerpc/5200: dts: remove unused properties

2011-01-03T23:02:50Z

This patch remove unused properties in dts files in preparation of refactoring the dts files for MPC5200b based boards. Signed-off-by: John Bonesio Signed-off-by: Grant Likely

powerpc/5200: dts: rename nodes to prepare for refactoring dts files

2011-01-03T23:02:50Z

This patch renames nodes in dts fils for MPC5200b files to prepare for refactoring of these files later. When refactoring it will be easier to verify the results if the node names aren't changing at the same time. Signed-off-by: John Bonesio Signed-off-by: Grant Likely

powerpc/5200: add lite5200 onboard I2C eeprom and flash

2010-06-15T06:04:31Z

Add dts descriptions for onboard 256 byte I2C eeprom (pcf8582C-2) and 16MB NOR flash (am29lv652d). Signed-off-by: Dmitry Eremin-Solenikov [grant.likely@secretlab.ca: added lite5200b eeprom and declared lite5200 gpios] Signed-off-by: Grant Likely

powerpc/boot/dts: drop obsolete 'fsl5200-clocking'

2009-10-15T15:58:27Z

The 'fsl5200-clocking'-property was dropped since 0d1cde235874b00905bce23f659690d060ebf475. Remove all occurences in dts-files. Signed-off-by: Wolfram Sang Signed-off-by: Grant Likely

powerpc/5200: Add FLASH nodes to lite5200 device tree

2009-04-16T21:11:54Z

Signed-off-by: Grant Likely

powerpc/5200: Trim cruft from device trees

2009-02-03T19:30:26Z

Trim out obsolete/extraneous properties and tighten up some usage conventions. Changes include: - removal of device_type properties - removal of cell-index properties - Addition of gpio-controller and #gpio-cells properties to gpio nodes - Move common interrupt-parent property out of device nodes and into top level parent node. This patch also include what looks to be just trivial editorial whitespace/format changes, but there is real method in this madness. Editorial changes were made to keep the all the mpc5200 board device trees as similar as possible so that diffs between them only show the real differences between the boards. The pcm030 device tree was most affected by this because many of the comments had been changed from // to /* */ style and some cell values where changed from decimal to hex format when it was cloned from one of the other 5200 device trees. Signed-off-by: Grant Likely Reviewed-by: Wolfram Sang

powerpc: Remove device_type = "rtc" properties in .dts files

2008-11-05T11:08:28Z

We don't want to encourage the device_type usage. It isn't used in the code, so we can simply remove it from the dts files. Suggested-by: Scott Wood Signed-off-by: Anton Vorontsov Acked-by: Grant Likely Acked-by: David Gibson Signed-off-by: Paul Mackerras

[POWERPC] mpc5200: Switch mpc5200 dts files to dts-v1 format

2008-04-29T13:19:07Z

Signed-off-by: Grant Likely