kernel/arch/mips/ralink/of.c, branch linux-6.2.y

of/fdt: run soc memory setup when early_init_dt_scan_memory fails

2023-01-04T00:41:01Z

If memory has been found early_init_dt_scan_memory now returns 1. If it hasn't found any memory it will return 0, allowing other memory setup mechanisms to carry on. Previously early_init_dt_scan_memory always returned 0 without distinguishing between any kind of memory setup being done or not. Any code path after the early_init_dt_scan memory call in the ramips plat_mem_setup code wouldn't be executed anymore. Making early_init_dt_scan_memory the only way to initialize the memory. Some boards, including my mt7621 based Cudy X6 board, depend on memory initialization being done via the soc_info.mem_detect function pointer. Those wouldn't be able to obtain memory and panic the kernel during early bootup with the message "early_init_dt_alloc_memory_arch: Failed to allocate 12416 bytes align=0x40". Fixes: 1f012283e936 ("of/fdt: Rework early_init_dt_scan_memory() to call directly") Cc: stable@vger.kernel.org Signed-off-by: Andreas Rammhold Link: https://lore.kernel.org/r/20221223112748.2935235-1-andreas@rammhold.de Signed-off-by: Rob Herring

MIPS: ralink: mt7621: avoid to init common ralink reset controller

2022-12-21T09:45:56Z

Commit 38a8553b0a22 ("clk: ralink: make system controller node a reset provider") make system controller a reset provider for mt7621 ralink SoCs. Ralink init code also tries to start previous common reset controller which at the end tries to find device tree node 'ralink,rt2880-reset'. mt7621 device tree file is not using at all this node anymore. Hence avoid to init this common reset controller for mt7621 ralink SoCs to avoid 'Failed to find reset controller node' boot error trace error. Fixes: 64b2d6ffff86 ("staging: mt7621-dts: align resets with binding documentation") Signed-off-by: Sergio Paracuellos Signed-off-by: Thomas Bogendoerfer

mips: ralink: Fix refcount leak in of.c

2022-06-21T15:04:30Z

In plat_of_remap_node(), plat_of_remap_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Signed-off-by: Liang He Signed-off-by: Thomas Bogendoerfer

MIPS: Remove redundant definitions of device_tree_init()

2022-03-14T14:09:02Z

There exists many same definitions of device_tree_init() for various platforms, add a weak function in arch/mips/kernel/prom.c to clean up the related code. Signed-off-by: Tiezhu Yang Signed-off-by: Thomas Bogendoerfer

of/fdt: Rework early_init_dt_scan_memory() to call directly

2021-12-16T22:07:52Z

Use of the of_scan_flat_dt() function predates libfdt and is discouraged as libfdt provides a nicer set of APIs. Rework early_init_dt_scan_memory() to be called directly and use libfdt. Cc: John Crispin Cc: Thomas Bogendoerfer Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Frank Rowand Cc: linux-mips@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Reviewed-by: Frank Rowand Signed-off-by: Rob Herring Tested-by: Michael Ellerman Link: https://lore.kernel.org/r/20211215150102.1303588-1-robh@kernel.org

MIPS: ralink: export rt_sysc_membase for rt2880_wdt.c

2021-05-25T13:22:04Z

rt2880_wdt.c uses (well, attempts to use) rt_sysc_membase. However, when this watchdog driver is built as a loadable module, there is a build error since the rt_sysc_membase symbol is not exported. Export it to quell the build error. ERROR: modpost: "rt_sysc_membase" [drivers/watchdog/rt2880_wdt.ko] undefined! Fixes: 473cf939ff34 ("watchdog: add ralink watchdog driver") Signed-off-by: Randy Dunlap Cc: Guenter Roeck Cc: Wim Van Sebroeck Cc: John Crispin Cc: linux-mips@vger.kernel.org Cc: linux-watchdog@vger.kernel.org Acked-by: Guenter Roeck Signed-off-by: Thomas Bogendoerfer

MIPS: ralink: mt7621: add memory detection support

2021-03-29T09:18:54Z

mt7621 has the following memory map: 0x0-0x1c000000: lower 448m memory 0x1c000000-0x2000000: peripheral registers 0x20000000-0x2400000: higher 64m memory detect_memory_region in arch/mips/kernel/setup.c only adds the first memory region and isn't suitable for 512m memory detection because it may accidentally read the memory area for peripheral registers. This commit adds memory detection capability for mt7621: 1. Add the highmem area when 512m is detected. 2. Guard memcmp from accessing peripheral registers: This only happens when a user decided to change kernel load address to 256m or higher address. Since this is a quite unusual case, we just skip 512m testing and return 256m as memory size. Signed-off-by: Chuanhong Guo [Minor commit message reword, make mt7621_memory_detect static] Signed-off-by: Ilya Lipnitskiy Signed-off-by: Thomas Bogendoerfer

MIPS: of: Introduce helper function to get DTB

2021-02-04T12:34:51Z

Selection of the DTB to be used was burried in more or less readable code in head.S. Move this code into a inline helper function and use it. Signed-off-by: Thomas Bogendoerfer Acked-by: Florian Fainelli

MIPS: Use address-of operator on section symbols

2021-01-07T16:10:36Z

When building xway_defconfig with clang: arch/mips/lantiq/prom.c:82:23: error: array comparison always evaluates to true [-Werror,-Wtautological-compare] else if (__dtb_start != __dtb_end) ^ 1 error generated. These are not true arrays, they are linker defined symbols, which are just addresses. Using the address of operator silences the warning and does not change the resulting assembly with either clang/ld.lld or gcc/ld (tested with diff + objdump -Dr). Do the same thing across the entire MIPS subsystem to ensure there are no more warnings around this type of comparison. Link: https://github.com/ClangBuiltLinux/linux/issues/1232 Signed-off-by: Nathan Chancellor Acked-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer

MIPS: replace add_memory_region with memblock

2020-10-12T10:01:36Z

add_memory_region was the old interface for registering memory and was already changed to used memblock internaly. Replace it by directly calling memblock functions. Signed-off-by: Thomas Bogendoerfer