kernel/arch/mips/loongson2ef/common, branch linux-6.2.y

MIPS: Loongson2ef: remove orphan sbx00_acpi_init() declaration

2022-09-19T14:34:31Z

All uses of sbx00_acpi_init() in the "pci.c" file were removed by commit 5831fdb099dd ("MIPS: Loongson2ef: clean up loongson64 related code"), so remove the orphan declaration, too. Signed-off-by: Gaosheng Cui Signed-off-by: Thomas Bogendoerfer

MIPS: loongson2ef: don't build serial.o unconditionally

2021-08-05T08:58:21Z

LOONGSON_UART_BASE depends on EARLY_PRINTK || SERIAL_8250, but when neither of these Kconfig symbols is set, the kernel build has errors: ../arch/mips/loongson2ef/common/serial.c: In function 'serial_init': ../arch/mips/loongson2ef/common/serial.c:66:25: error: 'loongson_uart_base' undeclared (first use in this function) 66 | loongson_uart_base; ../arch/mips/loongson2ef/common/serial.c:66:25: note: each undeclared identifier is reported only once for each function it appears in ../arch/mips/loongson2ef/common/serial.c:68:41: error: '_loongson_uart_base' undeclared (first use in this function) 68 | (void __iomem *)_loongson_uart_base; Fix this by building serial.o only when one (or both) of these Kconfig symbols is enabled. Tested with: (a) EARLY_PRINTK=y, SERIAL_8250 not set; (b) EARLY_PRINTK=y, SERIAL_8250=y; (c) EARLY_PRINTK=y, SERIAL_8250=m. (d) EARLY_PRINTK not set, SERIAL_8250=y; (e) EARLY_PRINTK not set, SERIAL_8250=m; (f) EARLY_PRINTK not set, SERIAL_8250 not set. Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Jiaxun Yang Cc: Thomas Bogendoerfer Cc: linux-mips@vger.kernel.org Signed-off-by: Thomas Bogendoerfer

MIPS: loongson2ef: remove function __uncached_access()

2021-01-27T20:51:15Z

We no longer need the MESA workaround, so remove it. Signed-off-by: Yanteng Si Signed-off-by: Thomas Bogendoerfer

MIPS: init: move externs to header file

2021-01-07T16:12:51Z

This commit fixes the following checkpatch warnings: WARNING: externs should be avoided in .c files This is a warning for placing declarations in a ".c" file. This fix removes the declaration in ".c" and adds it to the common header file. Signed-off-by: Yanteng Si Reviewed-by: Huacai Chen Signed-off-by: Thomas Bogendoerfer

MIPS: Remove empty prom_free_prom_memory functions

2021-01-07T16:11:33Z

Most of the prom_free_prom_memory functions are empty. With a new weak prom_free_prom_memory() we can remove all of them. Signed-off-by: Thomas Bogendoerfer Acked-by: Florian Fainelli

MIPS: replace add_memory_region with memblock

2020-10-12T10:01:36Z

add_memory_region was the old interface for registering memory and was already changed to used memblock internaly. Replace it by directly calling memblock functions. Signed-off-by: Thomas Bogendoerfer

MIPS: Fix exception handler memcpy()

2020-05-24T07:15:54Z

The exception handler subroutines are declared as a single char, but when copied to the required addresses the copy length is 0x80. When range checks are enabled for memcpy() this results in a build failure, with error messages such as: In file included from arch/mips/mti-malta/malta-init.c:15: In function 'memcpy', inlined from 'mips_nmi_setup' at arch/mips/mti-malta/malta-init.c:98:2: include/linux/string.h:376:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter 376 | __read_overflow2(); | ^~~~~~~~~~~~~~~~~~ Change the declarations to use type char[]. Signed-off-by: Ben Hutchings Signed-off-by: YunQiang Su Signed-off-by: Thomas Bogendoerfer

MIPS: Replace setup_irq() by request_irq()

2020-03-05T15:47:35Z

request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). remove_irq() has been replaced by free_irq() as well. There were build error's during previous version, couple of which was reported by kbuild test robot of which one was reported by Thomas Bogendoerfer as well. There were a few more issues including build errors, those also have been fixed. [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed Signed-off-by: Thomas Bogendoerfer

Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

2020-01-31T19:28:31Z

Pull MIPS changes from Paul Burton: "Nothing too big or scary in here: - Support mremap() for the VDSO, primarily to allow CRIU to restore the VDSO to its checkpointed location. - Restore the MIPS32 cBPF JIT, after having reverted the enablement of the eBPF JIT for MIPS32 systems in the 5.5 cycle. - Improve cop0 counter synchronization behaviour whilst onlining CPUs by running with interrupts disabled. - Better match FPU behaviour when emulating multiply-accumulate instructions on pre-r6 systems that implement IEEE754-2008 style MACs. - Loongson64 kernels now build using the MIPS64r2 ISA, allowing them to take advantage of instructions introduced by r2. - Support for the Ingenic X1000 SoC & the really nice little CU Neo development board that's using it. - Support for WMAC on GARDENA Smart Gateway devices. - Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in preparation for introducing IP35 (Origin 3*) support. - Various Kconfig & Makefile cleanups" * tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits) MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel MIPS: Loongson64: Disable exec hazard MIPS: Loongson64: Bump ISA level to MIPSR2 MIPS: Make DIEI support as a config option MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too" MIPS: asm: local: add barriers for Loongson MIPS: Loongson64: Select mac2008 only feature MIPS: Add MAC2008 Support Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel" MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again) MIPS: make CPU_HAS_LOAD_STORE_LR opt-out MIPS: generic: don't unconditionally select PINCTRL MIPS: don't explicitly select LIBFDT in Kconfig MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts MIPS: SGI-IP30: Check for valid pointer before using it MIPS: syscalls: fix indentation of the 'SYSNR' message MIPS: boot: fix typo in 'vmlinux.lzma.its' target MIPS: fix indentation of the 'RELOCS' message dt-bindings: Document loongson vendor-prefix MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi. ...

MIPS: Loongson2ef: drop pointless static qualifier in loongson_suspend_enter()

2020-01-09T17:57:07Z

There is no need to have the 'T *v' variable static since new value always be assigned before use it. Reported-by: Hulk Robot Signed-off-by: Mao Wenan Signed-off-by: Paul Burton Cc: Cc: Cc: Cc: Cc: Cc: Cc: Cc: