kernel/arch/mips/kvm/vz.c, branch linux-6.2.y

MIPS: KVM: fix vz.c kernel-doc notation

2022-02-01T07:36:27Z

Fix all kernel-doc warnings in mips/kvm/vz.c as reported by the kernel test robot: arch/mips/kvm/vz.c:471: warning: Function parameter or member 'out_compare' not described in '_kvm_vz_save_htimer' arch/mips/kvm/vz.c:471: warning: Function parameter or member 'out_cause' not described in '_kvm_vz_save_htimer' arch/mips/kvm/vz.c:471: warning: Excess function parameter 'compare' description in '_kvm_vz_save_htimer' arch/mips/kvm/vz.c:471: warning: Excess function parameter 'cause' description in '_kvm_vz_save_htimer' arch/mips/kvm/vz.c:1551: warning: No description found for return value of 'kvm_trap_vz_handle_cop_unusable' arch/mips/kvm/vz.c:1552: warning: expecting prototype for kvm_trap_vz_handle_cop_unusuable(). Prototype was for kvm_trap_vz_handle_cop_unusable() instead arch/mips/kvm/vz.c:1597: warning: No description found for return value of 'kvm_trap_vz_handle_msa_disabled' Fixes: c992a4f6a9b0 ("KVM: MIPS: Implement VZ support") Fixes: f4474d50c7d4 ("KVM: MIPS/VZ: Support hardware guest timer") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Thomas Bogendoerfer Cc: linux-mips@vger.kernel.org Cc: Huacai Chen Cc: Aleksandar Markovic Cc: James Hogan Cc: kvm@vger.kernel.org Signed-off-by: Thomas Bogendoerfer

KVM: MIPS: Remove a "set but not used" variable

2021-09-06T10:52:10Z

This fix a build warning: arch/mips/kvm/vz.c: In function '_kvm_vz_restore_htimer': >> arch/mips/kvm/vz.c:392:10: warning: variable 'freeze_time' set but not used [-Wunused-but-set-variable] 392 | ktime_t freeze_time; | ^~~~~~~~~~~ Reported-by: kernel test robot Signed-off-by: Huacai Chen Message-Id: <20210406024911.2008046-1-chenhuacai@loongson.cn> Signed-off-by: Paolo Bonzini

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2021-05-01T17:14:08Z

Pull kvm updates from Paolo Bonzini: "This is a large update by KVM standards, including AMD PSP (Platform Security Processor, aka "AMD Secure Technology") and ARM CoreSight (debug and trace) changes. ARM: - CoreSight: Add support for ETE and TRBE - Stage-2 isolation for the host kernel when running in protected mode - Guest SVE support when running in nVHE mode - Force W^X hypervisor mappings in nVHE mode - ITS save/restore for guests using direct injection with GICv4.1 - nVHE panics now produce readable backtraces - Guest support for PTP using the ptp_kvm driver - Performance improvements in the S2 fault handler x86: - AMD PSP driver changes - Optimizations and cleanup of nested SVM code - AMD: Support for virtual SPEC_CTRL - Optimizations of the new MMU code: fast invalidation, zap under read lock, enable/disably dirty page logging under read lock - /dev/kvm API for AMD SEV live migration (guest API coming soon) - support SEV virtual machines sharing the same encryption context - support SGX in virtual machines - add a few more statistics - improved directed yield heuristics - Lots and lots of cleanups Generic: - Rework of MMU notifier interface, simplifying and optimizing the architecture-specific code - a handful of "Get rid of oprofile leftovers" patches - Some selftests improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (379 commits) KVM: selftests: Speed up set_memory_region_test selftests: kvm: Fix the check of return value KVM: x86: Take advantage of kvm_arch_dy_has_pending_interrupt() KVM: SVM: Skip SEV cache flush if no ASIDs have been used KVM: SVM: Remove an unnecessary prototype declaration of sev_flush_asids() KVM: SVM: Drop redundant svm_sev_enabled() helper KVM: SVM: Move SEV VMCB tracking allocation to sev.c KVM: SVM: Explicitly check max SEV ASID during sev_hardware_setup() KVM: SVM: Unconditionally invoke sev_hardware_teardown() KVM: SVM: Enable SEV/SEV-ES functionality by default (when supported) KVM: SVM: Condition sev_enabled and sev_es_enabled on CONFIG_KVM_AMD_SEV=y KVM: SVM: Append "_enabled" to module-scoped SEV/SEV-ES control variables KVM: SEV: Mask CPUID[0x8000001F].eax according to supported features KVM: SVM: Move SEV module params/variables to sev.c KVM: SVM: Disable SEV/SEV-ES if NPT is disabled KVM: SVM: Free sev_asid_bitmap during init if SEV setup fails KVM: SVM: Zero out the VMCB array used to track SEV ASID association x86/sev: Drop redundant and potentially misleading 'sev_enabled' KVM: x86: Move reverse CPUID helpers to separate header file KVM: x86: Rename GPR accessors to make mode-aware variants the defaults ...

KVM: MIPS: rework flush_shadow_* callbacks into one that prepares the flush

2021-04-17T12:31:05Z

Both trap-and-emulate and VZ have a single implementation that covers both .flush_shadow_all and .flush_shadow_memslot, and both of them end with a call to kvm_flush_remote_tlbs. Unify the callbacks into one and extract the call to kvm_flush_remote_tlbs. The next patches will pull it further out of the the architecture-specific MMU notifier functions kvm_unmap_hva_range and kvm_set_spte_hva. Signed-off-by: Paolo Bonzini

MIPS: Remove KVM_TE support

2021-03-10T14:18:48Z

After removal of the guest part of KVM TE (trap and emulate), also remove the host part. Signed-off-by: Thomas Bogendoerfer

KVM: MIPS: clean up redundant kvm_run parameters in assembly

2020-09-28T11:57:21Z

In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu' structure. For historical reasons, many kvm-related function parameters retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This patch does a unified cleanup of these remaining redundant parameters. Signed-off-by: Tianjia Zhang Reviewed-by: Huacai Chen Tested-by: Jiaxun Yang Message-Id: <20200623131418.31473-6-tianjia.zhang@linux.alibaba.com> Signed-off-by: Paolo Bonzini

KVM: MIPS/VZ: Fix build error caused by 'kvm_run' cleanup

2020-08-11T11:19:41Z

Commit c34b26b98caca48ec9ee9 ("KVM: MIPS: clean up redundant 'kvm_run' parameters") remove the 'kvm_run' parameter in kvm_vz_gpsi_lwc2. The following build error: arch/mips/kvm/vz.c: In function 'kvm_trap_vz_handle_gpsi': arch/mips/kvm/vz.c:1243:43: error: 'run' undeclared (first use in this function) er = kvm_vz_gpsi_lwc2(inst, opc, cause, run, vcpu); ^~~ arch/mips/kvm/vz.c:1243:43: note: each undeclared identifier is reported only once for each function it appears in scripts/Makefile.build:283: recipe for target 'arch/mips/kvm/vz.o' failed make[2]: *** [arch/mips/kvm/vz.o] Error 1 scripts/Makefile.build:500: recipe for target 'arch/mips/kvm' failed make[1]: *** [arch/mips/kvm] Error 2 Makefile:1785: recipe for target 'arch/mips' failed make: *** [arch/mips] Error 2 Signed-off-by: Xingxing Su Signed-off-by: Paolo Bonzini

MIPS: VZ: Only include loongson_regs.h for CPU_LOONGSON64

2020-08-09T17:24:12Z

Only Loongson64 platform has and needs loongson_regs.h, including it unconditionally will cause build errors. Fixes: 7f2a83f1c2a941ebfee5 ("KVM: MIPS: Add CPUCFG emulation for Loongson-3") Cc: stable@vger.kernel.org Reported-by: kernel test robot Signed-off-by: Huacai Chen Message-Id: <1596891052-24052-1-git-send-email-chenhc@lemote.com> Signed-off-by: Paolo Bonzini

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2020-08-06T19:59:31Z

Pull KVM updates from Paolo Bonzini: "s390: - implement diag318 x86: - Report last CPU for debugging - Emulate smaller MAXPHYADDR in the guest than in the host - .noinstr and tracing fixes from Thomas - nested SVM page table switching optimization and fixes Generic: - Unify shadow MMU cache data structures across architectures" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (127 commits) KVM: SVM: Fix sev_pin_memory() error handling KVM: LAPIC: Set the TDCR settable bits KVM: x86: Specify max TDP level via kvm_configure_mmu() KVM: x86/mmu: Rename max_page_level to max_huge_page_level KVM: x86: Dynamically calculate TDP level from max level and MAXPHYADDR KVM: VXM: Remove temporary WARN on expected vs. actual EPTP level mismatch KVM: x86: Pull the PGD's level from the MMU instead of recalculating it KVM: VMX: Make vmx_load_mmu_pgd() static KVM: x86/mmu: Add separate helper for shadow NPT root page role calc KVM: VMX: Drop a duplicate declaration of construct_eptp() KVM: nSVM: Correctly set the shadow NPT root level in its MMU role KVM: Using macros instead of magic values MIPS: KVM: Fix build error caused by 'kvm_run' cleanup KVM: nSVM: remove nonsensical EXITINFO1 adjustment on nested NPF KVM: x86: Add a capability for GUEST_MAXPHYADDR < HOST_MAXPHYADDR support KVM: VMX: optimize #PF injection when MAXPHYADDR does not match KVM: VMX: Add guest physical address check in EPT violation and misconfig KVM: VMX: introduce vmx_need_pf_intercept KVM: x86: update exception bitmap on CPUID changes KVM: x86: rename update_bp_intercept to update_exception_bitmap ...

KVM: MIPS: clean up redundant 'kvm_run' parameters

2020-07-10T08:26:41Z

In the current kvm version, 'kvm_run' has been included in the 'kvm_vcpu' structure. For historical reasons, many kvm-related function parameters retain the 'kvm_run' and 'kvm_vcpu' parameters at the same time. This patch does a unified cleanup of these remaining redundant parameters. Signed-off-by: Tianjia Zhang Reviewed-by: Huacai Chen Message-Id: <20200623131418.31473-5-tianjia.zhang@linux.alibaba.com> Signed-off-by: Paolo Bonzini