kernel/arch/mips/jazz, branch linux-5.1.y

MIPS: jazz: fix 64bit build

2019-01-09T21:14:34Z

64bit JAZZ builds failed with linux-next/arch/mips/jazz/jazzdma.c: In function `vdma_init`: /linux-next/arch/mips/jazz/jazzdma.c:77:30: error: implicit declaration of function `KSEG1ADDR`; did you mean `CKSEG1ADDR`? [-Werror=implicit-function-declaration] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^~~~~~~~~ CKSEG1ADDR /linux-next/arch/mips/jazz/jazzdma.c:77:10: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] pgtbl = (VDMA_PGTBL_ENTRY *)KSEG1ADDR(pgtbl); ^ In file included from /linux-next/arch/mips/include/asm/barrier.h:11:0, from /linux-next/include/linux/compiler.h:248, from /linux-next/include/linux/kernel.h:10, from /linux-next/arch/mips/jazz/jazzdma.c:11: /linux-next/arch/mips/include/asm/addrspace.h:41:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] #define _ACAST32_ (_ATYPE_)(_ATYPE32_) /* widen if necessary */ ^ /linux-next/arch/mips/include/asm/addrspace.h:53:25: note: in expansion of macro `_ACAST32_` #define CPHYSADDR(a) ((_ACAST32_(a)) & 0x1fffffff) ^~~~~~~~~ /linux-next/arch/mips/jazz/jazzdma.c:84:44: note: in expansion of macro `CPHYSADDR` r4030_write_reg32(JAZZ_R4030_TRSTBL_BASE, CPHYSADDR(pgtbl)); Using correct casts and CKSEG1ADDR when dealing with the pgtbl setup fixes this. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Paul Burton Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org

mips/jazz: remove the mapping_error dma_map_ops method

2018-12-06T14:56:38Z

The Jazz iommu code already returns (~(dma_addr_t)0x0) on mapping failures, so we can switch over to returning DMA_MAPPING_ERROR and let the core dma-mapping code handle the rest. Signed-off-by: Christoph Hellwig Acked-by: Linus Torvalds

mm: remove include/linux/bootmem.h

2018-10-31T15:54:16Z

Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include @@ @@ - #include + #include [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport Signed-off-by: Stephen Rothwell Acked-by: Michal Hocko Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Ingo Molnar Cc: "James E.J. Bottomley" Cc: Jonas Bonn Cc: Jonathan Corbet Cc: Ley Foon Tan Cc: Mark Salter Cc: Martin Schwidefsky Cc: Matt Turner Cc: Michael Ellerman Cc: Michal Simek Cc: Palmer Dabbelt Cc: Paul Burton Cc: Richard Kuo Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Serge Semin Cc: Thomas Gleixner Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

dma-mapping: consolidate the dma mmap implementations

2018-09-20T07:01:16Z

The only functional differences (modulo a few missing fixes in the arch code) is that architectures without coherent caches need a hook to convert a virtual or dma address into a pfn, given that we don't have the kernel linear mapping available for the otherwise easy virt_to_page call. As a side effect we can support mmap of the per-device coherent area even on architectures not providing the callback, and we make previous dangerous default methods dma_common_mmap actually save for non-coherent architectures by rejecting it without the right helper. In addition to that we need a hook so that some architectures can override the protection bits when mmaping a dma coherent allocations. Signed-off-by: Christoph Hellwig Acked-by: Paul Burton # MIPS parts

dma-mapping: merge direct and noncoherent ops

2018-09-20T07:01:15Z

All the cache maintainance is already stubbed out when not enabled, but merging the two allows us to nicely handle the case where cache maintainance is required for some devices, but not others. Signed-off-by: Christoph Hellwig Acked-by: Paul Burton # MIPS parts

MIPS: Make (UN)CAC_ADDR() PHYS_OFFSET-agnostic

2018-07-30T17:27:20Z

Converting an address between cached & uncached (typically addresses in (c)kseg0 & (c)kseg1 or 2 xkphys regions) should not depend upon PHYS_OFFSET in any way - we're converting from a virtual address in one unmapped region to a virtual address in another unmapped region. For some reason our CAC_ADDR() & UNCAC_ADDR() macros make use of PAGE_OFFSET, which typically includes PHYS_OFFSET. This means that platforms with a non-zero PHYS_OFFSET typically have to workaround miscalculation by these 2 macros by also defining UNCAC_BASE to a value that isn't really correct. It appears that an attempt has previously been made to address this with commit 3f4579252aa1 ("MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET") which was later undone by commit ed3ce16c3d2b ("Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"") which also introduced the ar7 workaround. That attempt at a fix was roughly equivalent, but essentially caused the CAC_ADDR() & UNCAC_ADDR() macros to cancel out PHYS_OFFSET by adding & then subtracting it again. In his revert Leonid is correct that using PHYS_OFFSET makes no sense in the context of these macros, but appears to have missed its inclusion via PAGE_OFFSET which means PHYS_OFFSET actually had an effect after the revert rather than before it. Here we fix this by modifying CAC_ADDR() & UNCAC_ADDR() to stop using PAGE_OFFSET (& thus PHYS_OFFSET), instead using __pa() & __va() along with UNCAC_BASE. For UNCAC_ADDR(), __pa() will convert a cached address to a physical address which we can simply use as an offset from UNCAC_BASE to obtain an address in the uncached region. For CAC_ADDR() we can undo the effect of UNCAC_ADDR() by subtracting UNCAC_BASE and using __va() on the result. With this change made, remove definitions of UNCAC_BASE from the ar7 & pic32 platforms which appear to have defined them only to workaround this problem. Signed-off-by: Paul Burton References: 3f4579252aa1 ("MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET") References: ed3ce16c3d2b ("Revert "MIPS: make CAC_ADDR and UNCAC_ADDR account for PHYS_OFFSET"") Patchwork: https://patchwork.linux-mips.org/patch/20046/ Cc: Florian Fainelli Cc: James Hogan Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: Vladimir Kondratiev

mips/jazz: provide missing dma_mask/coherent_dma_mask

2018-07-12T15:58:31Z

Commit 205e1b7f51e4 ("dma-mapping: warn when there is no coherent_dma_mask") introduced a warning, if a device is missing a coherent_dma_mask. ESP and sonic are using dma mapping functions, so they need dma masks. [paul.burton@mips.com: - Wrap commit message.] Signed-off-by: Thomas Bogendoerfer Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/19828/ Cc: Ralf Baechle Cc: James Hogan Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org

MIPS: jazz: split dma mapping operations from dma-default

2018-06-24T16:27:27Z

Jazz actually has a very basic IOMMU, so split the ops into a separate implementation from the generic default support (which is about to go away anyway). Signed-off-by: Christoph Hellwig Patchwork: https://patchwork.linux-mips.org/patch/19548/ Signed-off-by: Paul Burton Cc: Florian Fainelli Cc: David Daney Cc: Kevin Cernekee Cc: Jiaxun Yang Cc: Tom Bogendoerfer Cc: Huacai Chen Cc: iommu@lists.linux-foundation.org Cc: linux-mips@linux-mips.org

MIPS: make the default mips dma implementation optional

2018-06-24T16:26:03Z

Octeon and loonson64 already don't use it at all, and we're going to migrate more plaforms away from it. Signed-off-by: Christoph Hellwig Patchwork: https://patchwork.linux-mips.org/patch/19536/ Signed-off-by: Paul Burton Cc: Florian Fainelli Cc: David Daney Cc: Kevin Cernekee Cc: Jiaxun Yang Cc: Tom Bogendoerfer Cc: Huacai Chen Cc: iommu@lists.linux-foundation.org Cc: linux-mips@linux-mips.org

MIPS: Set I/O port resource types correctly

2017-12-19T05:07:45Z

Set I/O port resource structs to have IORESOURCE_IO in their type field. Previously we marked these as merely IORESOURCE_BUSY without indicating the type. Setting the type doesn't fix any functional problem but makes %pR on the resource work better. Signed-off-by: Bjorn Helgaas