kernel/arch/mips/include/asm/r4kcache.h, branch linux-5.1.y

MIPS: c-r4k: Add r4k_blast_scache_node for Loongson-3

2018-11-21T05:04:17Z

For multi-node Loongson-3 (NUMA configuration), r4k_blast_scache() can only flush Node-0's scache. So we add r4k_blast_scache_node() by using (CAC_BASE | (node_id << NODE_ADDRSPACE_SHIFT)) instead of CKSEG0 as the start address. Signed-off-by: Huacai Chen [paul.burton@mips.com: Include asm/mmzone.h from asm/r4kcache.h for nid_to_addrbase(). Add asm/mach-generic/mmzone.h to allow inclusion for all platforms.] Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/21129/ Cc: Ralf Baechle Cc: James Hogan Cc: Steven J . Hill Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang Cc: Zhangjin Wu Cc: # 3.15+

MIPS: MT: Remove obsolete cache flush repeat code

2018-09-26T21:06:21Z

In much the same vein as commit ac41f9c46282 ("MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration") and commit eb75ecb113f5 ("MIPS: MT: Remove unused MT single-threaded cache flush code"), remove the long obsolete ndflush & niflush command line arguments which provided a hack that should not be useful outside of debug sessions performed long ago. Signed-off-by: Paul Burton

new helper: uaccess_kernel()

2017-03-28T20:43:25Z

Signed-off-by: Al Viro

MIPS: Fix protected_cache(e)_op() for microMIPS

2017-02-13T18:57:33Z

When building for microMIPS we need to ensure that the assembler always knows that there is code at the target of a branch or jump. Commit 7170bdc77755 ("MIPS: Add return errors to protected cache ops") introduced a fixup path to protected_cache(e)_op() which does not meet this requirement. The fixup path jumps to the "2" label but the .section pseudo-op immediately following it causes the label to be marked as data. Linking then fails with: mips-img-linux-gnu-ld: arch/mips/mm/c-r4k.o: .fixup+0x0: Unsupported jump between ISA modes; consider recompiling with interlinking enabled. Fix this by declaring that "2" labels code using the .insn directive. Fixes: 7170bdc77755 ("MIPS: Add return errors to protected cache ops") Signed-off-by: Paul Burton Signed-off-by: James Hogan Reviewed-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Cc: Ralf Baechle Patchwork: https://patchwork.linux-mips.org/patch/15274/ Signed-off-by: James Hogan

MIPS: Add return errors to protected cache ops

2017-02-03T15:19:02Z

The protected cache ops contain no out of line fixup code to return an error code in the event of a fault, with the cache op being skipped in that case. For KVM however we'd like to detect this case as page faulting will be disabled so it could happen during normal operation if the GVA page tables were flushed, and need to be handled by the caller. Add the out-of-line fixup code to load the error value -EFAULT into the return variable, and adapt the protected cache line functions to pass the error back to the caller. Signed-off-by: James Hogan Acked-by: Ralf Baechle Cc: Ralf Baechle Cc: Paolo Bonzini Cc: "Radim Krčmář" Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org

Replace with globally

2016-12-24T19:46:01Z

This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*' sed -i -e "s!$PATT!#include !" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro Signed-off-by: Linus Torvalds

MIPS: c-r4k: Fix protected_writeback_scache_line for EVA

2016-07-29T08:19:29Z

The protected_writeback_scache_line() function is used by local_r4k_flush_cache_sigtramp() to flush an FPU delay slot emulation trampoline on the userland stack from the caches so it is visible to subsequent instruction fetches. Commit de8974e3f76c ("MIPS: asm: r4kcache: Add EVA cache flushing functions") updated some protected_ cache flush functions to use EVA CACHEE instructions via protected_cachee_op(), and commit 83fd43449baa ("MIPS: r4kcache: Add EVA case for protected_writeback_dcache_line") did the same thing for protected_writeback_dcache_line(), but protected_writeback_scache_line() never got updated. Lets fix that now to flush the right user address from the secondary cache rather than some arbitrary kernel unmapped address. This issue was spotted through code inspection, and it seems unlikely to be possible to hit this in practice. It theoretically affect EVA kernels on EVA capable cores with an L2 cache, where the icache fetches straight from RAM (cpu_icache_snoops_remote_store == 0), running a hard float userland with FPU disabled (nofpu). That both Malta and Boston platforms override cpu_icache_snoops_remote_store to 1 suggests that all MIPS cores fetch instructions into icache straight from L2 rather than RAM. Fixes: de8974e3f76c ("MIPS: asm: r4kcache: Add EVA cache flushing functions") Signed-off-by: James Hogan Cc: Leonid Yegoshin Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13800/ Signed-off-by: Ralf Baechle

MIPS: r4kcache: Use correct base register for MIPS R6 cache flushes

2015-04-10T13:41:46Z

Commit 934c79231c1b("MIPS: asm: r4kcache: Add MIPS R6 cache unroll functions") added support for MIPS R6 cache flushes but it used the wrong base address register to perform the flushes so the same lines were flushed over and over. Moreover, replace the "addiu" instructions with LONG_ADDIU so the correct base address is calculated for 64-bit cores. Signed-off-by: Markos Chandras Fixes: 934c79231c1b("MIPS: asm: r4kcache: Add MIPS R6 cache unroll functions") Cc: linux-mips@linux-mips.org Reviewed-by: Maciej W. Rozycki Patchwork: https://patchwork.linux-mips.org/patch/9384/ Signed-off-by: Ralf Baechle

MIPS: asm: r4kcache: Add MIPS R6 cache unroll functions

2015-02-17T15:37:20Z

MIPS R6 changed the 'cache' instruction opcode and reduced the offset field to 8 bits. This means we now have to adjust the base register every 256 bytes and as a result of which we can no longer use the previous cache functions. Signed-off-by: Markos Chandras

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2014-12-12T01:56:37Z

Pull MIPS updates from Ralf Baechle: "This is an unusually large pull request for MIPS - in parts because lots of patches missed the 3.18 deadline but primarily because some folks opened the flood gates. - Retire the MIPS-specific phys_t with the generic phys_addr_t. - Improvments for the backtrace code used by oprofile. - Better backtraces on SMP systems. - Cleanups for the Octeon platform code. - Cleanups and fixes for the Loongson platform code. - Cleanups and fixes to the firmware library. - Switch ATH79 platform to use the firmware library. - Grand overhault to the SEAD3 and Malta interrupt code. - Move the GIC interrupt code to drivers/irqchip - Lots of GIC cleanups and updates to the GIC code to use modern IRQ infrastructures and features of the kernel. - OF documentation updates for the GIC bindings - Move GIC clocksource driver to drivers/clocksource - Merge GIC clocksource driver with clockevent driver. - Further updates to bring the GIC clocksource driver up to date. - R3000 TLB code cleanups - Improvments to the Loongson 3 platform code. - Convert pr_warning to pr_warn. - Merge a bunch of small lantiq and ralink fixes that have been staged/lingering inside the openwrt tree for a while. - Update archhelp for IP22/IP32 - Fix a number of issues for Loongson 1B. - New clocksource and clockevent driver for Loongson 1B. - Further work on clk handling for Loongson 1B. - Platform work for Broadcom BMIPS. - Error handling cleanups for TurboChannel. - Fixes and optimization to the microMIPS support. - Option to disable the FTLB. - Dump more relevant information on machine check exception - Change binfmt to allow arch to examine PT_*PROC headers - Support for new style FPU register model in O32 - VDSO randomization. - BCM47xx cleanups - BCM47xx reimplement the way the kernel accesses NVRAM information. - Random cleanups - Add support for ATH25 platforms - Remove pointless locking code in some PCI platforms. - Some improvments to EVA support - Minor Alchemy cleanup" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (185 commits) MIPS: Add MFHC0 and MTHC0 instructions to uasm. MIPS: Cosmetic cleanups of page table headers. MIPS: Add CP0 macros for extended EntryLo registers MIPS: Remove now unused definition of phys_t. MIPS: Replace use of phys_t with phys_addr_t. MIPS: Replace MIPS-specific 64BIT_PHYS_ADDR with generic PHYS_ADDR_T_64BIT PCMCIA: Alchemy Don't select 64BIT_PHYS_ADDR in Kconfig. MIPS: lib: memset: Clean up some MIPS{EL,EB} ifdefery MIPS: iomap: Use __mem_{read,write}{b,w,l} for MMIO MIPS: fix indentation. MAINTAINERS: Add entry for BMIPS multiplatform kernel MIPS: Enable VDSO randomization MIPS: Remove a temporary hack for debugging cache flushes in SMTC configuration MIPS: Remove declaration of obsolete arch_init_clk_ops() MIPS: atomic.h: Reformat to fit in 79 columns MIPS: Apply `.insn' to fixup labels throughout MIPS: Fix microMIPS LL/SC immediate offsets MIPS: Kconfig: Only allow 32-bit microMIPS builds MIPS: signal.c: Fix an invalid cast in ISA mode bit handling MIPS: mm: Only build one microassembler that is suitable ...