kernel/arch/mips/include/asm/kvm_host.h, branch linux-5.1.y

KVM: Call kvm_arch_memslots_updated() before updating memslots

2019-02-20T21:48:32Z

kvm_arch_memslots_updated() is at this point in time an x86-specific hook for handling MMIO generation wraparound. x86 stashes 19 bits of the memslots generation number in its MMIO sptes in order to avoid full page fault walks for repeat faults on emulated MMIO addresses. Because only 19 bits are used, wrapping the MMIO generation number is possible, if unlikely. kvm_arch_memslots_updated() alerts x86 that the generation has changed so that it can invalidate all MMIO sptes in case the effective MMIO generation has wrapped so as to avoid using a stale spte, e.g. a (very) old spte that was created with generation==0. Given that the purpose of kvm_arch_memslots_updated() is to prevent consuming stale entries, it needs to be called before the new generation is propagated to memslots. Invalidating the MMIO sptes after updating memslots means that there is a window where a vCPU could dereference the new memslots generation, e.g. 0, and incorrectly reuse an old MMIO spte that was created with (pre-wrap) generation==0. Fixes: e59dbe09f8e6 ("KVM: Introduce kvm_arch_memslots_updated()") Cc: Signed-off-by: Sean Christopherson Signed-off-by: Paolo Bonzini

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

2018-12-26T19:46:28Z

Pull KVM updates from Paolo Bonzini: "ARM: - selftests improvements - large PUD support for HugeTLB - single-stepping fixes - improved tracing - various timer and vGIC fixes x86: - Processor Tracing virtualization - STIBP support - some correctness fixes - refactorings and splitting of vmx.c - use the Hyper-V range TLB flush hypercall - reduce order of vcpu struct - WBNOINVD support - do not use -ftrace for __noclone functions - nested guest support for PAUSE filtering on AMD - more Hyper-V enlightenments (direct mode for synthetic timers) PPC: - nested VFIO s390: - bugfixes only this time" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (171 commits) KVM: x86: Add CPUID support for new instruction WBNOINVD kvm: selftests: ucall: fix exit mmio address guessing Revert "compiler-gcc: disable -ftracer for __noclone functions" KVM: VMX: Move VM-Enter + VM-Exit handling to non-inline sub-routines KVM: VMX: Explicitly reference RCX as the vmx_vcpu pointer in asm blobs KVM: x86: Use jmp to invoke kvm_spurious_fault() from .fixup MAINTAINERS: Add arch/x86/kvm sub-directories to existing KVM/x86 entry KVM/x86: Use SVM assembly instruction mnemonics instead of .byte streams KVM/MMU: Flush tlb directly in the kvm_zap_gfn_range() KVM/MMU: Flush tlb directly in kvm_set_pte_rmapp() KVM/MMU: Move tlb flush in kvm_set_pte_rmapp() to kvm_mmu_notifier_change_pte() KVM: Make kvm_set_spte_hva() return int KVM: Replace old tlb flush function with new one to flush a specified range. KVM/MMU: Add tlb flush with range helper function KVM/VMX: Add hv tlb range flush support x86/hyper-v: Add HvFlushGuestAddressList hypercall support KVM: Add tlb_remote_flush_with_range callback in kvm_x86_ops KVM: x86: Disable Intel PT when VMXON in L1 guest KVM: x86: Set intercept for Intel PT MSRs read/write KVM: x86: Implement Intel PT MSRs read/write emulation ...

KVM: Make kvm_set_spte_hva() return int

2018-12-21T10:28:41Z

The patch is to make kvm_set_spte_hva() return int and caller can check return value to determine flush tlb or not. Signed-off-by: Lan Tianyu Acked-by: Paul Mackerras Signed-off-by: Paolo Bonzini

MIPS: Avoid using .set mips0 to restore ISA

2018-11-09T18:23:19Z

We currently have 2 commonly used methods for switching ISA within assembly code, then restoring the original ISA. 1) Using a pair of .set push & .set pop directives. For example: .set push .set mips32r2 .set pop 2) Using .set mips0 to restore the ISA originally specified on the command line. For example: .set mips32r2 .set mips0 Unfortunately method 2 does not work with nanoMIPS toolchains, where the assembler rejects the .set mips0 directive like so: Error: cannot change ISA from nanoMIPS to mips0 In preparation for supporting nanoMIPS builds, switch all instances of method 2 in generic non-platform-specific code to use push & pop as in method 1 instead. The .set push & .set pop is arguably cleaner anyway, and if nothing else it's good to consistently use one method. Signed-off-by: Paul Burton Patchwork: https://patchwork.linux-mips.org/patch/21037/ Cc: linux-mips@linux-mips.org

KVM: Remove obsolete kvm_unmap_hva notifier backend

2018-09-07T13:06:02Z

kvm_unmap_hva is long gone, and we only have kvm_unmap_hva_range to deal with. Drop the now obsolete code. Fixes: fb1522e099f0 ("KVM: update to new mmu_notifier semantic v2") Cc: James Hogan Reviewed-by: Paolo Bonzini Signed-off-by: Marc Zyngier Signed-off-by: Christoffer Dall

KVM: update to new mmu_notifier semantic v2

2017-08-31T23:13:00Z

Calls to mmu_notifier_invalidate_page() were replaced by calls to mmu_notifier_invalidate_range() and are now bracketed by calls to mmu_notifier_invalidate_range_start()/end() Remove now useless invalidate_page callback. Changed since v1 (Linus Torvalds) - remove now useless kvm_arch_mmu_notifier_invalidate_page() Signed-off-by: Jérôme Glisse Tested-by: Mike Galbraith Tested-by: Adam Borowski Cc: Paolo Bonzini Cc: Radim Krčmář Cc: kvm@vger.kernel.org Cc: Kirill A. Shutemov Cc: Andrew Morton Cc: Andrea Arcangeli Signed-off-by: Linus Torvalds

kvm: make KVM_COALESCED_MMIO_PAGE_OFFSET public

2017-04-07T14:49:01Z

Its value has never changed; we might as well make it part of the ABI instead of using the return value of KVM_CHECK_EXTENSION(KVM_CAP_COALESCED_MMIO). Because PPC does not always make MMIO available, the code has to be made dependent on CONFIG_KVM_MMIO rather than KVM_COALESCED_MMIO_PAGE_OFFSET. Signed-off-by: Paolo Bonzini Signed-off-by: Radim Krčmář

KVM: MIPS/VZ: Support hardware guest timer

2017-03-28T13:53:59Z

Transfer timer state to the VZ guest context (CP0_GTOffset & guest CP0_Count) when entering guest mode, enabling direct guest access to it, and transfer back to soft timer when saving guest register state. This usually allows guest code to directly read CP0_Count (via MFC0 and RDHWR) and read/write CP0_Compare, without trapping to the hypervisor for it to emulate the guest timer. Writing to CP0_Count or CP0_Cause.DC is much less common and still triggers a hypervisor GPSI exception, in which case the timer state is transferred back to an hrtimer before emulating the write. We are careful to prevent small amounts of drift from building up due to undeterministic time intervals between reading of the ktime and reading of CP0_Count. Some drift is expected however, since the system clocksource may use a different timer to the local CP0_Count timer used by VZ. This is permitted to prevent guest CP0_Count from appearing to go backwards. Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: "Radim Krčmář" Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org

KVM: MIPS/VZ: Emulate MAARs when necessary

2017-03-28T13:53:58Z

Add emulation of Memory Accessibility Attribute Registers (MAARs) when necessary. We can't actually do anything with whatever the guest provides, but it may not be possible to clear Guest.Config5.MRP so we have to emulate at least a pair of MAARs. Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: "Radim Krčmář" Cc: Ralf Baechle Cc: Jonathan Corbet Cc: Steven Rostedt Cc: Ingo Molnar Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-doc@vger.kernel.org

KVM: MIPS/VZ: Support guest hardware page table walker

2017-03-28T13:53:57Z

Add support for VZ guest CP0_PWBase, CP0_PWField, CP0_PWSize, and CP0_PWCtl registers for controlling the guest hardware page table walker (HTW) present on P5600 and P6600 cores. These guest registers need initialising on R6, context switching, and exposing via the KVM ioctl API when they are present. Signed-off-by: James Hogan Cc: Paolo Bonzini Cc: "Radim Krčmář" Cc: Ralf Baechle Cc: Jonathan Corbet Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-doc@vger.kernel.org