kernel/arch/mips/include/asm/fpu.h, branch linux-4.15.y

Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

2017-04-06T20:16:34Z

Pull MIPS fixes from Ralf Baechle: "Lantiq: - Fix adding xbar resoures causing a panic Loongson3: - Some Loongson 3A don't identify themselves as having an FTLB so hardwire that knowledge into CPU probing. - Handle Loongson 3 TLB peculiarities in the fast path of the RDHWR emulation. - Fix invalid FTLB entries with huge page on VTLB+FTLB platforms - Add missing calculation of S-cache and V-cache cache-way size Ralink: - Fix typos in rt3883 pinctrl data Generic: - Force o32 fp64 support on 32bit MIPS64r6 kernels - Yet another build fix after the linux/sched.h changes - Wire up statx system call - Fix stack unwinding after introduction of IRQ stack - Fix spinlock code to build even for microMIPS with recent binutils SMP-CPS: - Fix retrieval of VPE mask on big endian CPUs" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: IRQ Stack: Unwind IRQ stack onto task stack MIPS: c-r4k: Fix Loongson-3's vcache/scache waysize calculation MIPS: Flush wrong invalid FTLB entry for huge page MIPS: Check TLB before handle_ri_rdhwr() for Loongson-3 MIPS: Add MIPS_CPU_FTLB for Loongson-3A R2 MIPS: Lantiq: fix missing xbar kernel panic MIPS: smp-cps: Fix retrieval of VPE mask on big endian CPUs MIPS: Wire up statx system call MIPS: Include asm/ptrace.h now linux/sched.h doesn't MIPS: ralink: Fix typos in rt3883 pinctrl MIPS: End spinlocks with .insn MIPS: Force o32 fp64 support on 32bit MIPS64r6 kernels

MIPS: Include asm/ptrace.h now linux/sched.h doesn't

2017-03-08T11:08:31Z

Use of the task_pt_regs() based macros in MIPS' asm/processor.h for accessing the user context on the kernel stack need the definition of struct pt_regs from asm/ptrace.h. __own_fpu() in asm/fpu.h uses these macros but implicitly depended on linux/sched.h to include asm/ptrace.h. Since commit f780d89a0e82 ("sched/headers: Remove from ") however linux/sched.h no longer includes asm/ptrace.h, so include it explicitly from asm/fpu.h where it is needed instead. This fixes build errors such as: ./arch/mips/include/asm/fpu.h: In function '__own_fpu': ./arch/mips/include/asm/processor.h:385:31: error: invalid application of 'sizeof' to incomplete type 'struct pt_regs' THREAD_SIZE - 32 - sizeof(struct pt_regs)) ^ Fixes: f780d89a0e82 ("sched/headers: Remove from ") Signed-off-by: James Hogan Acked-by: Ingo Molnar Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15386/ Signed-off-by: Ralf Baechle

MIPS: Add missing include files

2017-03-08T09:38:06Z

After the split of linux/sched.h, several platforms in arch/mips stopped building. Add the respective additional #include statements to fix the problem I first tried adding these into asm/processor.h, but ran into circular header dependencies with that which I could not figure out. The commit I listed as causing the problem is the branch merge, as there is likely a combination of multiple patches in that branch. Signed-off-by: Arnd Bergmann Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-mips@linux-mips.org Cc: ralf@linux-mips.org Fixes: 1827adb11ad2 ("Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip") Link: http://lkml.kernel.org/r/20170308072931.3836696-1-arnd@arndb.de Signed-off-by: Ingo Molnar

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:36Z

We are going to split out of , which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder file that just maps to to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

MIPS: Fix FPU disable with preemption

2016-02-01T22:36:38Z

The FPU should not be left enabled after a task context switch. This isn't usually a problem as the FPU enable bit is updated before returning to userland, however it can potentially mask kernel bugs, and in fact KVM assumes it won't happen and won't clear the FPU enable bit before returning to the guest, which allows the guest to use stale FPU context. Interrupts and exceptions save and restore most bits of the CP0 Status register which contains the FPU enable bit (CU1). When the kernel needs to enable or disable the FPU (for example due to attempted FPU use by userland, or the scheduler being invoked) both the actual Status register and the saved value in the userland context are updated. However this doesn't work correctly with full kernel preemption enabled, since the FPU enable bit can be cleared from within an interrupt when the scheduler is invoked, and only the userland context is updated, not the interrupt context. For example: 1) Enter kernel with FPU already enabled, TIF_USEDFPU=1, Status.CU1=1 saved. 2) Take a timer interrupt while in kernel mode, Status.CU1=1 saved. 3) Timer interrupt invokes scheduler to preempt the task, which clears TIF_USEDFPU, disables the FPU in Status register (Status.CU1=0), and the value stored in user context from step (1), but not the interrupt context from step (2). 4) When the process is scheduled back in again Status.CU1=0. 5) The interrupt context from step (2) is restored, which sets Status.CU1=1. So from user context point of view, preemption has re-enabled FPU! 6) If the scheduler is invoked again (via preemption or voluntarily) before returning to userland, TIF_USEDFPU=0 so the FPU is not disabled before the task context switch. 7) The next task resumes from the context switch with FPU enabled! The restoring of the Status register on return from interrupt/exception is already selective about which bits to restore, leaving the interrupt mask bits alone so enabling/disabling of CPU interrupt lines can persist. Extend this to also leave both the CU1 bit (FPU enable) and the FR bit (which specifies the FPU mode and gets changed with CU1). This prevents a stale Status value being restored in step (5) above and persisting through subsequent context switches. Also switch to the use of definitions from asm/mipsregs.h while we're at it. Since this change also affects the restoration of Status register on the path back to userland, it increases the sensitivity of the kernel to the problem of the FPU being left enabled, allowing it to propagate to userland, therefore a warning is also added to lose_fpu_inatomic() to point out any future reoccurances before they do any damage. Signed-off-by: James Hogan Reviewed-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/12303/ Signed-off-by: Ralf Baechle

MIPS: Tidy up FPU context switching

2015-09-03T10:08:05Z

Rather than saving the scalar FP or vector context in the assembly resume function, reuse the existing C code we have in fpu.h to do exactly that. This reduces duplication, results in a much easier to read resume function & should allow the compiler to optimise out more MSA code due to is_msa_enabled()/cpu_has_msa being known-zero at compile time for kernels without MSA support. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: Leonid Yegoshin Cc: Maciej W. Rozycki Cc: linux-kernel@vger.kernel.org Cc: James Hogan Cc: Markos Chandras Cc: Manuel Lauss Patchwork: https://patchwork.linux-mips.org/patch/10830/ Signed-off-by: Ralf Baechle

MIPS: fpu.h: Allow 64-bit FPU on a 64-bit MIPS R6 CPU

2015-07-19T09:31:24Z

Commit 6134d94923d0 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") added support for 64-bit FPU on a 32-bit MIPS R6 processor but it missed the 64-bit CPU case leading to FPU failures when requesting FR=1 mode (which is always the case for MIPS R6 userland) when running a 32-bit kernel on a 64-bit CPU. We also fix the MIPS R2 case. Signed-off-by: Markos Chandras Fixes: 6134d94923d0 ("MIPS: asm: fpu: Allow 64-bit FPU on MIPS32 R6") Reviewed-by: Paul Burton Cc: # 4.0+ Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10734/ Signed-off-by: Ralf Baechle

Merge branch '4.1-fp' into mips-for-linux-next

2015-04-13T14:01:37Z

MIPS: Respect the ISA level in FCSR handling

2015-04-07T23:10:37Z

Define the central place the default FCSR value is set from, initialised in `cpu_probe'. Determine the FCSR mask applied to values written to the register with CTC1 in the full emulation mode and via ptrace(2), according to the ISA level of processor hardware or the writability of bits 31:18 if actual FPU hardware is used. Software may rely on FCSR bits whose functions our emulator does not implement, so it should not allow them to be set or software may get confused. For ptrace(2) it's just sanity. [ralf@linux-mips.org: Fixed double inclusion of .] Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9711/ Signed-off-by: Ralf Baechle

MIPS: disable FPU if the mode is unsupported

2015-03-27T18:42:47Z

The expected semantics of __enable_fpu are for the FPU to be enabled in the given mode if possible, otherwise for the FPU to be left disabled and SIGFPE returned. The FPU was incorrectly being left enabled in cases where the desired value for FR was unavailable. Without ensuring the FPU is disabled in this case, it would be possible for userland to go on to execute further FP instructions natively in the incorrect mode, rather than those instructions being trapped & emulated as they need to be. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/9167/ Signed-off-by: Ralf Baechle