kernel/arch/mips/generic, branch linux-4.15.y

Merge tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

2017-11-15T19:36:08Z

Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.15. Fixes: - ralink: Fix MT7620 PCI build issues (4.5) - Disable cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN for 32-bit SMP (4.1) - Fix MIPS64 FP save/restore on 32-bit kernels (4.0) - ptrace: Pick up ptrace/seccomp changed syscall numbers (3.19) - ralink: Fix MT7628 pinmux (3.19) - BCM47XX: Fix LED inversion on WRT54GSv1 (3.17) - Fix n32 core dumping as o32 since regset support (3.13) - ralink: Drop obsolete USB_ARCH_HAS_HCD select Build system: - Default to "generic" (multiplatform) system type instead of IP22 - Use generic little endian MIPS32 r2 configuration as default defconfig instead of ip22_defconfig FPU emulation: - Fix exception generation for certain R6 FPU instructions SMP: - Allow __cpu_number_map to be larger than NR_CPUS for sparse CPU id spaces Miscellaneous: - Add iomem resource for kernel bss section for kexec/kdump - Atomics: Nudge writes on bit unlock - DT files: Standardise "ok" -> "okay" Minor cleanups: - Define virt_to_pfn() - Make thread_saved_pc static - Simplify 32-bit sign extension in __read_64bit_c0_split() - DMA: Use vma_pages() helper - FPU emulation: Replace unsigned with unsigned int - MM: Removed unused lastpfn - Alchemy: Make clk_ops const - Lasat: Use setup_timer() helper - ralink: Use BIT() in MT7620 PCI driver Platform support: BMIPS: - Enable HARDIRQS_SW_RESEND Broadcom BCM63XX: - Add clkdev lookup support - Update clk driver, UART driver, DTs to handle named refclk from DTs - Split apart various clocks to more closely match hardware - Add ethernet clocks Cavium Octeon: - Remove usage of cvmx_wait() in favour of __delay() ImgTec Pistachio: - DT: Drop deprecated dwmmc num-slots property Ingenic JZ4780: - Add NFS root to Ci20 defconfig - Add watchdog to Ci20 DT & defconfig, and allow building of watchdog driver with this SoC Generic (multiplatform): - Migrate xilfpga (MIPSfpga) platform to the generic platform Lantiq xway: - Fix ASC0/ASC1 clocks" * tag 'mips_4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (46 commits) MIPS: Add iomem resource for kernel bss section. MIPS: cmpxchg64() and HAVE_VIRT_CPU_ACCOUNTING_GEN don't work for 32-bit SMP MIPS: BMIPS: Enable HARDIRQS_SW_RESEND MIPS: pci: Make use of the BIT() macro inside the mt7620 driver MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver MIPS: pci: Remove duplicate define in mt7620 driver MIPS: ralink: Fix typo in mt7628 pinmux function MIPS: ralink: Fix MT7628 pinmux MIPS: Fix odd fp register warnings with MIPS64r2 watchdog: jz4780: Allow selection of jz4740-wdt driver MIPS/ptrace: Update syscall nr on register changes MIPS/ptrace: Pick up ptrace/seccomp changed syscalls MIPS: Fix an n32 core file generation regset support regression MIPS: Fix MIPS64 FP save/restore on 32-bit kernels MIPS: page.h: Define virt_to_pfn() MIPS: Xilfpga: Switch to using generic defconfigs MIPS: generic: Add support for MIPSfpga MIPS: Set defconfig target to a generic system for 32r2el MIPS: Kconfig: Set default MIPS system type as generic MIPS: DTS: Remove num-slots from Pistachio SoC ...

MIPS: generic: Add support for MIPSfpga

2017-11-08T22:53:44Z

Add support for the MIPSfpga platform to generic kernel. Signed-off-by: Zubair Lutfullah Kakakhel Cc: Ralf Baechle Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15846/ [jhogan@kernel.org: Use separate board-xilfpga.its.S. Add 32r2 and little endian requires to board-xilfpga.config] Signed-off-by: James Hogan

Merge tag 'mips_fixes_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips

2017-11-04T18:31:02Z

Pull MIPS fixes from James Hogan: "A selection of important MIPS fixes for 4.14, and some MAINTAINERS / email address updates: Maintainership updates: - imgtec.com -> mips.com email addresses (this trivially updates comments in quite a few files, as well as MAINTAINERS) - Pistachio SoC maintainership update Fixes: - NI 169445 build (new platform in 4.14) - EVA regression (4.14) - SMP-CPS build & preemption regressions (4.14) - SMP/hotplug deadlock & race (deadlock reintroduced 4.13) - ebpf_jit error return (4.13) - SMP-CMP build regressions (4.11 and 4.14) - bad UASM microMIPS encoding (3.16) - CM definitions (3.15)" [ I had taken the email address updates separately, because I didn't expect James to send a pull request, so those got applied twice. - Linus] * tag 'mips_fixes_4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: MIPS: Update email address for Marcin Nowakowski MIPS: smp-cmp: Fix vpe_id build error MAINTAINERS: Update Pistachio platform maintainers MIPS: smp-cmp: Use right include for task_struct MIPS: Update Goldfish RTC driver maintainer email address MIPS: Update RINT emulation maintainer email address MIPS: CPS: Fix use of current_cpu_data in preemptible code MIPS: SMP: Fix deadlock & online race MIPS: bpf: Fix a typo in build_one_insn() MIPS: microMIPS: Fix incorrect mask in insn_table_MM MIPS: Fix CM region target definitions MIPS: generic: Fix compilation error from include asm/mips-cpc.h MIPS: Fix exception entry when CONFIG_EVA enabled MIPS: generic: Fix NI 169445 its build Update MIPS email addresses

Update MIPS email addresses

2017-11-03T16:02:30Z

MIPS will soon not be a part of Imagination Technologies, and as such many @imgtec.com email addresses will no longer be valid. This patch updates the addresses for those who: - Have 10 or more patches in mainline authored using an @imgtec.com email address, or any patches dated within the past year. - Are still with Imagination but leaving as part of the MIPS business unit, as determined from an internal email address list. - Haven't already updated their email address (ie. JamesH) or expressed a desire to be excluded (ie. Maciej). - Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt & myself. New addresses are of the form firstname.lastname@mips.com, and all verified against an internal email address list. An entry is added to .mailmap for each person such that get_maintainer.pl will report the new addresses rather than @imgtec.com addresses which will soon be dead. Instances of the affected addresses throughout the tree are then mechanically replaced with the new @mips.com address. Signed-off-by: Paul Burton Cc: Deng-Cheng Zhu Cc: Deng-Cheng Zhu Acked-by: Dengcheng Zhu Cc: Matt Redfearn Cc: Matt Redfearn Acked-by: Matt Redfearn Cc: Andrew Morton Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Signed-off-by: Linus Torvalds

MIPS: Update email address for Marcin Nowakowski

2017-11-02T10:58:43Z

MIPS is no longer part of Imagination Technologies and my @imgtec.com address will soon stop working. Update any files containing my address as well as the .mailmap to point to my new @mips.com address. Signed-off-by: Marcin Nowakowski Patchwork: https://patchwork.linux-mips.org/patch/17579/ Signed-off-by: James Hogan

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

MIPS: generic: Fix compilation error from include asm/mips-cpc.h

2017-10-31T23:49:48Z

Commit e83f7e02af50c ("MIPS: CPS: Have asm/mips-cps.h include CM & CPC headers") adds a #error to arch/mips/include/asm/mips-cpc.h if it is included directly. While this commit replaced almost all direct includes of mips-cm.h and mips-cpc.h, 2 remain. With some defconfigs, mips-cps.h is indirectly included before mips-cpc.h, but in others this results in compilation errors: In file included from arch/mips/generic/init.c:23:0: ./arch/mips/include/asm/mips-cpc.h:12:3: error: #error Please include asm/mips-cps.h rather than asm/mips-cpc.h # error Please include asm/mips-cps.h rather than asm/mips-cpc.h In file included from arch/mips/kernel/smp.c:23:0: ./arch/mips/include/asm/mips-cpc.h:12:3: error: #error Please include asm/mips-cps.h rather than asm/mips-cpc.h # error Please include asm/mips-cps.h rather than asm/mips-cpc.h In both cases, fix this by including mips-cps.h instead. Fixes: e83f7e02af50c ("MIPS: CPS: Have asm/mips-cps.h include CM & CPC headers") Signed-off-by: Matt Redfearn Patchwork: https://patchwork.linux-mips.org/patch/17492/ Signed-off-by: James Hogan

MIPS: generic: Fix NI 169445 its build

2017-10-31T22:55:44Z

Since commit 04a85e087ad6 ("MIPS: generic: Move NI 169445 FIT image source to its own file"), a generic 32r2el_defconfig kernel fails to build with the following build error: ITB arch/mips/boot/vmlinux.gz.itb Error: arch/mips/boot/vmlinux.gz.its:111.1-2 syntax error FATAL ERROR: Unable to parse input tree mkimage Can't read arch/mips/boot/vmlinux.gz.itb.tmp: Invalid argument Fix arch/mips/generic/board-ni169445.its.S to include the necessary "/" node path before the first open brace. The original issue in arch/mips/generic/vmlinux.its.S was fixed directly in the original commit 7aacf86b75bc ("MIPS: NI 169445 board support") after https://patchwork.linux-mips.org/patch/16941/ was submitted, but the separate its.S file wasn't correctly fixed when resolving the conflict in commit 04a85e087ad6 ("MIPS: generic: Move NI 169445 FIT image source to its own file"). Fixes: 04a85e087ad6 ("MIPS: generic: Move NI 169445 FIT image source to its own file") Signed-off-by: James Hogan Cc: Ralf Baechle Cc: Paul Burton Cc: Nathan Sullivan Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17561/ Signed-off-by: James Hogan

Update MIPS email addresses

2017-10-31T22:42:39Z

irqchip: mips-gic: Move gic_get_c0_*_int() to asm/mips-gic.h

2017-09-04T11:53:14Z

The linux/irqchip/mips-gic.h header is now almost empty. Move the declarations of gic_get_c0_compare_int(), gic_get_c0_perfcount_int() & gic_get_c0_fdc_int() to asm/mips-gic.h in order to close in on being able to delete the former header. Signed-off-by: Paul Burton Acked-by: Marc Zyngier Cc: Jason Cooper Cc: Thomas Gleixner Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17046/ Signed-off-by: Ralf Baechle