kernel/arch/mips/boot/compressed/Makefile, branch linux-5.12.y

mips: always link byteswap helpers into decompressor

2021-07-20T14:02:28Z

[ Upstream commit cddc40f5617e53f97ef019d5b29c1bd6cbb031ec ] My series to clean up the unaligned access implementation across architectures caused some mips randconfig builds to fail with: mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel': decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2' It turns out that this problem has already been fixed for the XZ decompressor but now it also shows up in (at least) LZO and LZ4. From my analysis I concluded that the compiler could always have emitted those calls, but the different implementation allowed it to make otherwise better decisions about not inlining the byteswap, which results in the link error when the out-of-line code is missing. While it could be addressed by adding it to the two decompressor implementations that are known to be affected, but as this only adds 112 bytes to the kernel, the safer choice is to always add them. Fixes: c50ec6787536 ("MIPS: zboot: Fix the build with XZ compression on older GCC versions") Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers") Link: https://lore.kernel.org/linux-mm/202106301304.gz2wVY9w-lkp@intel.com/ Link: https://lore.kernel.org/linux-mm/202106260659.TyMe8mjr-lkp@intel.com/ Link: https://lore.kernel.org/linux-mm/202106172016.onWT6Tza-lkp@intel.com/ Link: https://lore.kernel.org/linux-mm/202105231743.JJcALnhS-lkp@intel.com/ Signed-off-by: Arnd Bergmann Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin

MIPS: compressed: fix build with enabled UBSAN

2021-02-09T10:15:16Z

Commit 1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer UBSAN") added a possibility to build the entire kernel with UBSAN instrumentation for MIPS, with the exception for VDSO. However, self-extracting head wasn't been added to exceptions, so this occurs: mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o: in function `FSE_buildDTable_wksp': decompress.c:(.text.FSE_buildDTable_wksp+0x278): undefined reference to `__ubsan_handle_shift_out_of_bounds' mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2a8): undefined reference to `__ubsan_handle_shift_out_of_bounds' mips-alpine-linux-musl-ld: decompress.c:(.text.FSE_buildDTable_wksp+0x2c4): undefined reference to `__ubsan_handle_shift_out_of_bounds' mips-alpine-linux-musl-ld: arch/mips/boot/compressed/decompress.o: decompress.c:(.text.FSE_buildDTable_raw+0x9c): more undefined references to `__ubsan_handle_shift_out_of_bounds' follow Add UBSAN_SANITIZE := n to mips/boot/compressed/Makefile to exclude it from instrumentation scope and fix this issue. Fixes: 1e35918ad9d1 ("MIPS: Enable Undefined Behavior Sanitizer UBSAN") Cc: stable@vger.kernel.org # 5.0+ Signed-off-by: Alexander Lobakin Signed-off-by: Thomas Bogendoerfer

MIPS: Enable GCOV

2020-12-04T12:00:53Z

Enable gcov profiling of the entire kernel on mips. Required changes include disabling profiling for: * arch/kernel/boot/compressed: not linked to main kernel. Lightly tested on Loongson 3A3000 an 3A4000, seems to work as expected. without "GCOV_PROFILE := n" in compressed Makefile, build errors as follows: ... ld: arch/mips/boot/compressed/string.o:(.data+0x88): undefined reference to `__gcov_merge_add' ld: arch/mips/boot/compressed/string.o: in function `_GLOBAL__sub_I_00100_0_memcpy': string.c:(.text.startup+0x4): undefined reference to `__gcov_init' ld: arch/mips/boot/compressed/string.o: in function `_GLOBAL__sub_D_00100_1_memcpy': string.c:(.text.exit+0x0): undefined reference to `__gcov_exit' ... Signed-off-by: Youling Tang Signed-off-by: Xingxing Su Signed-off-by: Thomas Bogendoerfer

mips: boot: add support for self-extracting FIT images (vmlinuz.itb)

2020-11-12T22:47:22Z

Commit c3e2ee657418 ("MIPS: generic: Add support for zboot") added support for self-extracting images to Generic MIPS. However, the intended way to boot Generic MIPS kernels is using FIT Images and UHI boot protocol, but currently there's no way to make self-extracting FIT Image (only legacy uzImages). Add a target for this named "vmlinuz.itb", which will consist of vmlinuz.bin and selected DT blobs. It will allow to have the advantages of both UHI and self-extracting images. Signed-off-by: Alexander Lobakin Acked-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer

mips: boot: clean up self-extracting targets scenarios

2020-11-12T22:46:45Z

1. All final targets like vmlinuz.{bin,ecoff,srec} etc. should reside in $(objtree)/arch/mips/boot, not in the root $(objtree) directory. The only file that should be left there is vmlinuz, similar to other architectures. 2. Add all the targets to $(targets) variable, so they'll be properly accounted by Kbuild. This also allows to remove redundant $(clean-files) (which were missing uzImage BTW). 3. Prefix all targets with $(obj)/$(objtree), depending on their locations. Misc: fix the identation of the 'STRIP' quiet message. Signed-off-by: Alexander Lobakin Acked-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer

MIPS: Loongson-3: Enable COP2 usage in kernel

2020-09-21T20:15:03Z

Loongson-3's COP2 is Multi-Media coprocessor, it is disabled in kernel mode by default. However, gslq/gssq (16-bytes load/store instructions) overrides the instruction format of lwc2/swc2. If we wan't to use gslq/ gssq for optimization in kernel, we should enable COP2 usage in kernel. Please pay attention that in this patch we only enable COP2 in kernel, which means it will lose ST0_CU2 when a process go to user space (try to use COP2 in user space will trigger an exception and then grab COP2, which is similar to FPU). And as a result, we need to modify the context switching code because the new scheduled process doesn't contain ST0_CU2 in its THERAD_STATUS probably. For zboot, we disable gslq/gssq be generated by toolchain. Signed-off-by: Huacai Chen Signed-off-by: Thomas Bogendoerfer

MIPS: Add support for ZSTD-compressed kernels

2020-09-03T08:13:24Z

Add support for self-extracting kernels with a ZSTD compression. Tested on a kernel for the GCW-Zero, it allows to reduce the size of the kernel file from 4.1 MiB with gzip to 3.5 MiB with ZSTD, and boots just as fast. Compressed kernels are now also compiled with -D__DISABLE_EXPORTS in order to disable the EXPORT_SYMBOL() macros inside of lib/zstd/decompress.c. Signed-off-by: Paul Cercueil Signed-off-by: Thomas Bogendoerfer

MIPS: Truncate link address into 32bit for 32bit kernel

2020-05-07T08:31:01Z

LLD failed to link vmlinux with 64bit load address for 32bit ELF while bfd will strip 64bit address into 32bit silently. To fix LLD build, we should truncate load address provided by platform into 32bit for 32bit kernel. Signed-off-by: Jiaxun Yang Link: https://github.com/ClangBuiltLinux/linux/issues/786 Link: https://sourceware.org/bugzilla/show_bug.cgi?id=25784 Reviewed-by: Fangrui Song Reviewed-by: Kees Cook Tested-by: Nathan Chancellor Cc: Maciej W. Rozycki Tested-by: Nick Desaulniers Signed-off-by: Thomas Bogendoerfer

kbuild: rename hostprogs-y/always to hostprogs/always-y

2020-02-03T16:53:07Z

In old days, the "host-progs" syntax was used for specifying host programs. It was renamed to the current "hostprogs-y" in 2004. It is typically useful in scripts/Makefile because it allows Kbuild to selectively compile host programs based on the kernel configuration. This commit renames like follows: always -> always-y hostprogs-y -> hostprogs So, scripts/Makefile will look like this: always-$(CONFIG_BUILD_BIN2C) += ... always-$(CONFIG_KALLSYMS) += ... ... hostprogs := $(always-y) $(always-m) I think this makes more sense because a host program is always a host program, irrespective of the kernel configuration. We want to specify which ones to compile by CONFIG options, so always-y will be handier. The "always", "hostprogs-y", "hostprogs-m" will be kept for backward compatibility for a while. Signed-off-by: Masahiro Yamada

MIPS: Prevent link failure with kcov instrumentation

2019-12-18T23:15:03Z

__sanitizer_cov_trace_pc() is not linked in and causing link failure if KCOV_INSTRUMENT is enabled. Fix this by disabling instrumentation for compressed image. Signed-off-by: Jouni Hogander Signed-off-by: Paul Burton Cc: Lukas Bulwahn Cc: linux-mips@vger.kernel.org