kernel/arch/mips/alchemy/devboards/bcsr.c, branch linux-rolling-stable

treewide: Add SPDX license identifier for missed files

2019-05-21T08:50:45Z

Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

MIPS: Audit and remove any unnecessary uses of module.h

2017-02-14T09:00:25Z

Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by: Paul Gortmaker Cc: David Daney Cc: John Crispin Cc: Ralf Baechle Cc: "Steven J. Hill" Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by: James Hogan

genirq: Remove irq argument from irq flow handlers

2015-09-16T13:47:51Z

Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner Cc: Julia Lawall Cc: Jiang Liu

MIPS: alchemy: Remove pointless irqdisable/enable

2015-08-26T13:23:30Z

bcsr_csc_handler() is a cascading interrupt handler. It has a disable_irq_nosync()/enable_irq() pair around the generic_handle_irq() call. The value of this disable/enable is zero because its a complete noop: disable_irq_nosync() merily increments the disable count without actually masking the interrupt. enable_irq() soleley decrements the disable count without touching the interrupt chip. The interrupt cannot arrive again because the complete call chain runs with interrupts disabled. Remove it. [ralf@linux-mips.org: Fold in followup fix from Thomas Gleixner.] Signed-off-by: Thomas Gleixner Cc: linux-mips@linux-mips.org Cc: LKML Cc: Jiang Liu Patchwork: https://patchwork.linux-mips.org/patch/10702/ Patchwork: https://patchwork.linux-mips.org/patch/10708/ Signed-off-by: Ralf Baechle

MIPS: Whitespace cleanup.

2013-02-01T09:00:22Z

Having received another series of whitespace patches I decided to do this once and for all rather than dealing with this kind of patches trickling in forever. Signed-off-by: Ralf Baechle

MIPS: Alchemy: handle db1200 cpld ints as they come in

2012-07-23T12:53:38Z

Remove the loop in the cascade handler and instead unconditionally handle just the first set interrupt coming from the CPLD. This gets rid of a lot of spurious interrupts being triggered for the SMSC91111 ethernet chip especially under high(er) IDE load: "eth0: spurious interrupt (mask = 0xb3)" Verified on DB1200 and DB1300. Signed-off-by: Manuel Lauss Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3288/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: devboards: remove unneeded BCSR IRQ reg acc

2011-12-07T22:02:05Z

Initially I had to write to both the MASK and ENABLE registers, otherwise the CPLD would generate tons of spurious interrupts. With the change to the demux handler to disable the muxed line, it is now sufficient to disable the interrupt by writing either the enable or mask register. Signed-off-by: Manuel Lauss To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2865/ Signed-off-by: Ralf Baechle

MIPS: Alchemy: DB1200: Disable cascade IRQ in handler

2011-09-21T15:53:32Z

Disable the cascade IRQ in the cascade handler. This is required to get the DB1300 working, and also gets rid of all spurious interrupts previously observed on the DB1200; so Config[OD] can be disabled again for better performance. Signed-off-by: Manuel Lauss To: Linux-MIPS Patchwork: https://patchwork.linux-mips.org/patch/2708/ Signed-off-by: Ralf Baechle

MIPS: Convert the irq functions to the new names

2011-03-29T12:48:07Z

Scripted with coccinelle. Signed-off-by: Thomas Gleixner

MIPS: Alchemy: Convert to new irq chip functions

2011-03-25T17:45:14Z

Fix the deadlock in set_type() while at it: The code called set_irq_chip_and_handler_name() resp. set_irq_chip() from the set_type() callback. That only works on UP and lock debugging disabled. Otherwise it would dead lock on desc->lock. __irq_set_chip_handler_name_locked() avoids that. Signed-off-by: Thomas Gleixner To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2173/ Signed-off-by: Ralf Baechle