kernel/arch/m68k/include/asm/atarihw.h, branch linux-rolling-stable

m68k: atari: Rename shifter to shifter_st to avoid conflict

2019-08-19T11:24:10Z

When test-compiling the BCM2835 pin control driver on m68k: In file included from arch/m68k/include/asm/io_mm.h:32:0, from arch/m68k/include/asm/io.h:8, from include/linux/io.h:13, from include/linux/irq.h:20, from include/linux/gpio/driver.h:7, from drivers/pinctrl/bcm/pinctrl-bcm2835.c:17: drivers/pinctrl/bcm/pinctrl-bcm2835.c: In function 'bcm2711_pull_config_set': arch/m68k/include/asm/atarihw.h:190:22: error: expected identifier or '(' before 'volatile' # define shifter ((*(volatile struct SHIFTER *)SHF_BAS)) "shifter" is a too generic name for a global definition. As the corresponding definition for Atari TT is already called "shifter_tt", fix this by renaming the definition for Atari ST to "shifter_st". Reported-by: kbuild test robot Suggested-by: Michael Schmitz Signed-off-by: Geert Uytterhoeven Reviewed-by: Linus Walleij

m68k: Prevent some compiler warnings in Coldfire builds

2019-08-19T11:24:10Z

Since commit d3b41b6bb49e ("m68k: Dispatch nvram_ops calls to Atari or Mac functions"), Coldfire builds generate compiler warnings due to the unconditional inclusion of asm/atarihw.h and asm/macintosh.h. The inclusion of asm/atarihw.h causes warnings like this: In file included from ./arch/m68k/include/asm/atarihw.h:25:0, from arch/m68k/kernel/setup_mm.c:41, from arch/m68k/kernel/setup.c:3: ./arch/m68k/include/asm/raw_io.h:39:0: warning: "__raw_readb" redefined #define __raw_readb in_8 In file included from ./arch/m68k/include/asm/io.h:6:0, from arch/m68k/kernel/setup_mm.c:36, from arch/m68k/kernel/setup.c:3: ./arch/m68k/include/asm/io_no.h:16:0: note: this is the location of the previous definition #define __raw_readb(addr) \ ... This issue is resolved by dropping the asm/raw_io.h include. It turns out that asm/io_mm.h already includes that header file. Moving the relevant macro definitions helps to clarify this dependency and make it safe to include asm/atarihw.h. The other warnings look like this: In file included from arch/m68k/kernel/setup_mm.c:48:0, from arch/m68k/kernel/setup.c:3: ./arch/m68k/include/asm/macintosh.h:19:35: warning: 'struct irq_data' declared inside parameter list will not be visible outside of this definition or declaration extern void mac_irq_enable(struct irq_data *data); ^~~~~~~~ ... This issue is resolved by adding the missing linux/irq.h include. Signed-off-by: Finn Thain Acked-by: Greg Ungerer Signed-off-by: Geert Uytterhoeven

m68k: Dispatch nvram_ops calls to Atari or Mac functions

2019-01-22T09:21:45Z

A multi-platform kernel binary has to decide at run-time how to dispatch the arch_nvram_ops calls. Add a platform-independent arch_nvram_ops struct for this, to replace the atari-specific one. Enable CONFIG_HAVE_ARCH_NVRAM_OPS for Macs. Acked-by: Geert Uytterhoeven Tested-by: Stan Johnson Signed-off-by: Finn Thain Signed-off-by: Greg Kroah-Hartman

m68k: group io mapping definitions and functions

2018-05-27T23:45:26Z

Create a new header file, kmap.h, that groups all the definitions and functions associated with the io mapping and remapping. Currently the functions are spread across raw_io.h and io_mm.h. And in the future we will want to use these in io_no.h as well. So it makes sense to move them all together into a single header file. It is named after the arch/m68k/mm/kmap.c file that actually implements many of the exported functions. Signed-off-by: Greg Ungerer Tested-by: Angelo Dureghello

m68k/UAPI: Disintegrate arch/m68k/include/asm/bootinfo.h

2013-11-26T10:09:15Z

Export the bootinfo definitions that are used by bootstrap loaders, and split them up in generic and platform-specific parts. Signed-off-by: Geert Uytterhoeven

m68k/atari: EtherNAT - platform device and IRQ support code

2013-04-16T19:18:29Z

Add platform device and interrupt definitions necessary for the EtherNAT Ethernet/USB adapter for the Falcon extension port. EtherNAT interrupt numbers are 139/140 so the max. interrupt number for Atari has to be increased. [Geert] Conditionalize platform device data structures Signed-off-by: Michael Schmitz Signed-off-by: Geert Uytterhoeven

m68k/atari: Move declaration of atari_SCC_reset_done to header file

2011-12-10T18:52:49Z

Signed-off-by: Geert Uytterhoeven

m68k/atari: Prefix GPIO_{IN,OUT} with CODEC_

2011-07-30T19:21:39Z

These defines are way to generic, and cause conflicts: drivers/net/wireless/rtlwifi/rtl8192c/../rtl8192ce/reg.h:369:1: warning: "GPIO_IN" redefined drivers/net/wireless/rtlwifi/rtl8192c/../rtl8192ce/reg.h:370:1: warning: "GPIO_OUT" redefined drivers/net/wireless/rtlwifi/rtl8192se/reg.h:252:1: warning: "GPIO_IN" redefined drivers/net/wireless/rtlwifi/rtl8192se/reg.h:253:1: warning: "GPIO_OUT" redefined Signed-off-by: Geert Uytterhoeven

m68k/atari: Rename "scc" to "atari_scc"

2011-01-23T10:24:35Z

It's a way too generic name for a global #define and conflicts with a variable with the same name, causing build errors like: | drivers/staging/brcm80211/brcmfmac/../util/siutils.c: In function ‘_si_clkctl_cc’: | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected identifier or ‘(’ before ‘volatile’ | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1364: error: expected ‘)’ before ‘(’ token | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1421: error: incompatible types in assignment | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1422: error: invalid operands to binary & | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1423: error: invalid operands to binary & | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1424: error: invalid operands to binary | | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: aggregate value used where an integer was expected | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1425: error: incompatible type for argument 4 of ‘bcmsdh_reg_write’ | drivers/staging/brcm80211/brcmfmac/../util/siutils.c:1428: error: invalid operands to binary & | make[8]: *** [drivers/staging/brcm80211/brcmfmac/../util/siutils.o] Error 1 Signed-off-by: Geert Uytterhoeven

m68k: atari - Rename "mfp" to "st_mfp"

2009-02-22T17:23:02Z

http://kisskb.ellerman.id.au/kisskb/buildresult/72115/: | net/mac80211/ieee80211_i.h:327: error: syntax error before 'volatile' | net/mac80211/ieee80211_i.h:350: error: syntax error before '}' token | net/mac80211/ieee80211_i.h:455: error: field 'sta' has incomplete type | distcc[19430] ERROR: compile net/mac80211/main.c on sprygo/32 failed This is caused by | # define mfp ((*(volatile struct MFP*)MFP_BAS)) in arch/m68k/include/asm/atarihw.h, which conflicts with the new "mfp" enum in net/mac80211/ieee80211_i.h. Rename "mfp" to "st_mfp", as it's a way too generic name for a global #define. Signed-off-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds