kernel/arch/arm64/boot/dts/amlogic, branch linux-6.2.y

arm64: dts: meson-g12-common: resolve conflict between canvas & pmu

2023-04-26T12:29:54Z

[ Upstream commit 33acea2049b5058b93d1dabb536b494f543f02a2 ] According to S905X2 Datasheet - Revision 07: DMC_MON area spans 0xff638080-0xff6380c0 DDR_PLL area spans 0xff638c00-0xff638c34 Round DDR_PLL area size up to 0x40 Fixes: 90cf8e21016fa3 ("arm64: dts: meson: Add DDR PMU node") Signed-off-by: Marc Gonzalez Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20230327120932.2158389-3-mgonzalez@freebox.fr Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: meson-g12-common: specify full DMC range

2023-04-26T12:29:54Z

[ Upstream commit aec4353114a408b3a831a22ba34942d05943e462 ] According to S905X2 Datasheet - Revision 07: DRAM Memory Controller (DMC) register area spans ff638000-ff63a000. According to DeviceTree Specification - Release v0.4-rc1: simple-bus nodes do not require reg property. Fixes: 1499218c80c99a ("arm64: dts: move common G12A & G12B modes to meson-g12-common.dtsi") Signed-off-by: Marc Gonzalez Reviewed-by: Martin Blumenstingl Link: https://lore.kernel.org/r/20230327120932.2158389-2-mgonzalez@freebox.fr Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: meson: bananapi-m5: switch VDDIO_C pin to OPEN_DRAIN

2023-03-10T08:27:52Z

[ Upstream commit 856968e066bd77b113965f1a355ec7401edff65f ] For proper warm (re)boot from SD card the BPI-M5 board requires TFLASH_VDD_EN and VDDIO_C pins to be switched to high impedance mode. This can be achieved using OPEN_DRAIN instead of ACTIVE_HIGH to leave the GPIO pins in input mode and retain high state (pin has the pull-up). This change is inspired by meson-sm1-odroid.dtsi where OPEN_DRAIN has been used to resolve similar problems with the Odroid C4 board (TF_IO in the C4 dts is the equivalent regulator). Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts") Suggested-by: Neil Armstrong Signed-off-by: Christian Hewitt Reviewed-by: Neil Armstrong Link: https://lore.kernel.org/r/20230127142221.3718184-2-christianshewitt@gmail.com Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: meson: radxa-zero: allow usb otg mode

2023-03-10T08:27:52Z

[ Upstream commit ce43ea00b927805c1fd0450ccc9b4b6069e292c5 ] Setting dr_mode to "host" prevents otg which can be useful on a board with limited connectivity options. So don't force host mode. Fixes: 26d1400f7457 ("arm64: dts: amlogic: add support for Radxa Zero") Signed-off-by: Christian Hewitt Acked-by: Neil Armstrong Link: https://lore.kernel.org/r/20230127103913.3386435-1-christianshewitt@gmail.com Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: amlogic: meson-sm1-odroid-hc4: fix active fan thermal trip

2023-03-10T08:27:51Z

[ Upstream commit 1d2f14117aa7773efff50f832b85fc7779e586e0 ] Add an active trip tied to the on-board fan cooling device, which is better than describing it along the passive cooling maps. Fixes: 33b14f663df8 ("arm64: dts: meson: add initial device-tree for ODROID-HC4") Reported-by: Ricardo Pardini Link: https://lore.kernel.org/r/20230124-topic-odroid-hc4-upstream-fix-fan-trip-v1-1-b0c6aa355d93@linaro.org Tested-by: Ricardo Pardini [narmstrong: added Ricardo's tested-by from off-list chat] Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: amlogic: meson-g12b-odroid-go-ultra: fix rk818 pmic properties

2023-03-10T08:27:51Z

[ Upstream commit ce9999722656f2433af9029571bc2b99448dda74 ] Fixes: pmic@1c: '#clock-cells' is a required property pmic@1c: 'switch-supply' does not match any of the regexes: 'pinctrl-[0-9]+' The switch supply is described by vcc9-supply per bindings documentation. Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-14-44351528957e@linaro.org Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: amlogic: meson-gxbb-kii-pro: fix led node name

2023-03-10T08:27:51Z

[ Upstream commit afdef3b188c934f79ad4b0a7bd8c692742f9b5af ] Fixes: leds: status: {...} is not of type 'array' Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-13-44351528957e@linaro.org Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: amlogic: meson-gxl-s905d-phicomm-n1: fix led node name

2023-03-10T08:27:51Z

[ Upstream commit eee64d8fbbdaab72bbab3e462f3a7b742d20c8c2 ] Fixes: leds: status: {...} is not of type 'array' Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-12-44351528957e@linaro.org Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: amlogic: meson-sm1-bananapi-m5: fix adc keys node names

2023-03-10T08:27:50Z

[ Upstream commit d519a73332b6c3d14e15f8fd20d7c6f29ed13d41 ] Fixes: adc_keys: 'key' does not match any of the regexes: '^button-', 'pinctrl-[0-9]+' Also fix the invalid "adc_keys" node name. Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-11-44351528957e@linaro.org Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin

arm64: dts: amlogic: meson-gx-libretech-pc: fix update button name

2023-03-10T08:27:50Z

[ Upstream commit 6bb506ed36968207a8832f0143ebc127f0770eef ] Fixes: adc-keys: 'update-button' does not match any of the regexes: '^button-', 'pinctrl-[0-9]+' Link: https://lore.kernel.org/r/20230124-b4-amlogic-bindings-fixups-v1-10-44351528957e@linaro.org Signed-off-by: Neil Armstrong Signed-off-by: Sasha Levin