kernel/arch/arm/mm/dma-mapping.c, branch linux-4.15.y

ARM: 8699/1: dma-mapping: Remove init_dma_coherent_pool_size()

2017-09-28T10:13:06Z

There are no users of init_dma_coherent_pool_size() left due to 387870f ("mm: dmapool: use provided gfp flags for all dma_alloc_coherent() calls"), so remove it. Signed-off-by: Vladimir Murzin Signed-off-by: Russell King

ARM: 8698/1: dma-mapping: Mark atomic_pool as __ro_after_init

2017-09-28T10:13:05Z

atomic_pool is setup once while init stage and never changed after that, so it is good candidate for __ro_after_init. Since we are here mark atomic_pool_size with __init_data. Signed-off-by: Vladimir Murzin Signed-off-by: Russell King

ARM: 8697/1: dma-mapping: Do not pass data to gen_pool_set_algo()

2017-09-28T10:13:04Z

gen_pool_first_fit_order_align() does not make use of additional data, so pass plain NULL there. Signed-off-by: Vladimir Murzin Signed-off-by: Russell King

dma-coherent: introduce interface for default DMA pool

2017-07-20T14:09:10Z

Christoph noticed [1] that default DMA pool in current form overload the DMA coherent infrastructure. In reply, Robin suggested [2] to split the per-device vs. global pool interfaces, so allocation/release from default DMA pool is driven by dma ops implementation. This patch implements Robin's idea and provide interface to allocate/release/mmap the default (aka global) DMA pool. To make it clear that existing *_from_coherent routines work on per-device pool rename them to *_from_dev_coherent. [1] https://lkml.org/lkml/2017/7/7/370 [2] https://lkml.org/lkml/2017/7/7/431 Cc: Vineet Gupta Cc: Russell King Cc: Catalin Marinas Cc: Will Deacon Cc: Ralf Baechle Suggested-by: Robin Murphy Tested-by: Andras Szemzo Reviewed-by: Robin Murphy Signed-off-by: Vladimir Murzin Signed-off-by: Christoph Hellwig

ARM: dma-mapping: Remove traces of NOMMU code

2017-06-30T17:03:11Z

DMA operations for NOMMU case have been just factored out into separate compilation unit, so don't keep dead code. Tested-by: Benjamin Gaignard Tested-by: Andras Szemzo Tested-by: Alexandre TORGUE Signed-off-by: Vladimir Murzin Acked-by: Arnd Bergmann Acked-by: Russell King Signed-off-by: Christoph Hellwig

arm: remove arch specific dma_supported implementation

2017-06-28T13:54:45Z

And instead wire it up as method for all the dma_map_ops instances. Note that the code seems a little fishy for dmabounce and iommu, but for now I'd like to preserve the existing behavior 1:1. Signed-off-by: Christoph Hellwig

arm: implement ->mapping_error

2017-06-28T13:54:36Z

DMA_ERROR_CODE is going to go away, so don't rely on it. Signed-off-by: Christoph Hellwig

arm: dma-mapping: Reset the device's dma_ops

2017-05-30T09:31:34Z

arch_teardown_dma_ops() being the inverse of arch_setup_dma_ops() ,dma_ops should be cleared in the teardown path. Currently, only the device's iommu mapping structures are cleared in arch_teardown_dma_ops, but not the dma_ops. So on the next reprobe, dma_ops left in place is stale from the first IOMMU setup, but iommu mappings has been disposed of. This is a problem when the probe of the device is deferred and recalled with the IOMMU probe deferral. So for fixing this, slightly refactor by moving the code from __arm_iommu_detach_device to arm_iommu_detach_device and cleanup the former. This takes care of resetting the dma_ops in the teardown path. Fixes: 09515ef5ddad ("of/acpi: Configure dma operations at probe time for platform/amba/pci bus devices") Reviewed-by: Laurent Pinchart Signed-off-by: Sricharan R Signed-off-by: Joerg Roedel

ARM: dma-mapping: Don't tear down third-party mappings

2017-05-30T09:31:33Z

arch_setup_dma_ops() is used in device probe code paths to create an IOMMU mapping and attach it to the device. The function assumes that the device is attached to a device-specific IOMMU instance (or at least a device-specific TLB in a shared IOMMU instance) and thus creates a separate mapping for every device. On several systems (Renesas R-Car Gen2 being one of them), that assumption is not true, and IOMMU mappings must be shared between multiple devices. In those cases the IOMMU driver knows better than the generic ARM dma-mapping layer and attaches mapping to devices manually with arm_iommu_attach_device(), which sets the DMA ops for the device. The arch_setup_dma_ops() function takes this into account and bails out immediately if the device already has DMA ops assigned. However, the corresponding arch_teardown_dma_ops() function, called from driver unbind code paths (including probe deferral), will tear the mapping down regardless of who created it. When the device is reprobed arch_setup_dma_ops() will be called again but won't perform any operation as the DMA ops will still be set. We need to reset the DMA ops in arch_teardown_dma_ops() to fix this. However, we can't do so unconditionally, as then a new mapping would be created by arch_setup_dma_ops() when the device is reprobed, regardless of whether the device needs to share a mapping or not. We must thus keep track of whether arch_setup_dma_ops() created the mapping, and only in that case tear it down in arch_teardown_dma_ops(). Keep track of that information in the dev_archdata structure. As the structure is embedded in all instances of struct device let's not grow it, but turn the existing dma_coherent bool field into a bitfield that can be used for other purposes. Fixes: 09515ef5ddad ("of/acpi: Configure dma operations at probe time for platform/amba/pci bus devices") Reviewed-by: Robin Murphy Signed-off-by: Laurent Pinchart Signed-off-by: Joerg Roedel

Merge tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

2017-05-09T22:15:47Z

Pull IOMMU updates from Joerg Roedel: - code optimizations for the Intel VT-d driver - ability to switch off a previously enabled Intel IOMMU - support for 'struct iommu_device' for OMAP, Rockchip and Mediatek IOMMUs - header optimizations for IOMMU core code headers and a few fixes that became necessary in other parts of the kernel because of that - ACPI/IORT updates and fixes - Exynos IOMMU optimizations - updates for the IOMMU dma-api code to bring it closer to use per-cpu iova caches - new command-line option to set default domain type allocated by the iommu core code - another command line option to allow the Intel IOMMU switched off in a tboot environment - ARM/SMMU: TLB sync optimisations for SMMUv2, Support for using an IDENTITY domain in conjunction with DMA ops, Support for SMR masking, Support for 16-bit ASIDs (was previously broken) - various other small fixes and improvements * tag 'iommu-updates-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (63 commits) soc/qbman: Move dma-mapping.h include to qman_priv.h soc/qbman: Fix implicit header dependency now causing build fails iommu: Remove trace-events include from iommu.h iommu: Remove pci.h include from trace/events/iommu.h arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops() ACPI/IORT: Fix CONFIG_IOMMU_API dependency iommu/vt-d: Don't print the failure message when booting non-kdump kernel iommu: Move report_iommu_fault() to iommu.c iommu: Include device.h in iommu.h x86, iommu/vt-d: Add an option to disable Intel IOMMU force on iommu/arm-smmu: Return IOVA in iova_to_phys when SMMU is bypassed iommu/arm-smmu: Correct sid to mask iommu/amd: Fix incorrect error handling in amd_iommu_bind_pasid() iommu: Make iommu_bus_notifier return NOTIFY_DONE rather than error code omap3isp: Remove iommu_group related code iommu/omap: Add iommu-group support iommu/omap: Make use of 'struct iommu_device' iommu/omap: Store iommu_dev pointer in arch_data iommu/omap: Move data structures to omap-iommu.h iommu/omap: Drop legacy-style device support ...