kernel/arch/arm/mach-sa1100, branch linux-6.2.y

ARM: Kconfig: clean up platform selection

2022-08-18T14:44:59Z

The top-level platform selection is mostly meaningless these days after almost everything is sorted below the CONFIG_ARCH_MULTIPLATFORM, with the only exception being the 20+ year old StrongARM based machines. Make this more consistent by removing the entire choice statement and moving the StrongARM specific options into regular platform specific Kconfig files. The three platforms (footbridge, rpc and sa1100) are still mutually exclusive and cannot coexist with other ARMv4/v5 machines, but since there are only three of them and we will not add more, this can be expressed using Kconfig 'depends on' statements. Signed-off-by: Arnd Bergmann

ARM: remove obsolete Makefile.boot infrastructure

2022-08-18T14:44:59Z

There are a number of old Makefile.boot files that remain from the multiplatform conversion, and three that are still in use. These provide the "ZRELADDR", "PARAMS_PHYS" and "INITRD_PHYS" values that are platform specific. It turns out that we can generally just derive this from information that is available elsewhere: - ZRELADDR is normally detected at runtime with the CONFIG_AUTO_ZRELADDR flag, but also needed to be passed to for 'make uImage'. In a multiplatform kernel, one always has to pass this as the $(LOADADDR) variable, but in the StrongARM kernels we can derive it from the sum of $(CONFIG_PHYS_OFFSET) and $(TEXT_OFFSET) that are already known. - PARAMS_PHYS and INITRD_PHYS are only used for bootpImage, which in turn is only used for the pre-ATAGS 'param_struct' based boot interface on StrongARM based machines with old boot loaders. They can both be derived from CONFIG_PHYS_OFFSET and a machine specific offset for the initrd, so all of the logic for these can be part of arch/arm/boot/bootp/Makefile. Signed-off-by: Arnd Bergmann

ARM: sa1100: mark most boards as unused

2022-07-22T12:18:39Z

Most Arm board files are unused and will be removed in early 2023 if no remaining users show up. For the sa1100 platform, the machines that are still in use are: - Russell's Assabet development board - Linus' H3600 iPaq PocketPC - Collie as the only qemu-supported board, to allow testing by others All remaining sa1100 boards are marked to depend on CONFIG_UNUSED_BOARD_FILES to give potential users a last chance to speak up. Cc: Kristoffer Ericson Cc: Russell King Acked-by: Linus Walleij Signed-off-by: Arnd Bergmann

watchdog: sa1100: use platform device registration

2022-04-19T19:33:57Z

Rather than relying on machine specific headers to pass down the reboot status and the register locations, use resources and platform_data. Aside from this, keep the changes to a minimum. Cc: Wim Van Sebroeck Cc: linux-watchdog@vger.kernel.org Acked-by: Guenter Roeck Signed-off-by: Arnd Bergmann

ARM: 9101/1: sa1100/assabet: convert LEDs to gpiod APIs

2021-10-25T12:11:54Z

Convert the Assabet LEDs to use the gpiod APIs. Signed-off-by: Linus Walleij Signed-off-by: Russell King (Oracle)

ARM: 9049/1: locomo: make locomo bus's remove callback return void

2021-02-01T19:44:30Z

The driver core ignores the return value of struct bus_type::remove because there is only little that can be done. To simplify the quest to make this function return void, let struct locomo_driver::remove return void, too. All users already unconditionally return 0, this commit makes it obvious that returning an error code is a bad idea and ensures future users behave accordingly. Link: https://lore.kernel.org/r/20201126110140.2021758-1-u.kleine-koenig@pengutronix.de Acked-by: Dmitry Torokhov Acked-by: Lee Jones Signed-off-by: Uwe Kleine-König Signed-off-by: Russell King

power: supply: collie_battery: Convert to GPIO descriptors

2020-11-30T01:18:49Z

This converts the Collie battery driver to use GPIO descriptors. We use a mixture of 3 GPIOs defined in the machine and 3 GPIOs requested directly from the ucb1x00 chip. Cc: Robert Jarzmik Cc: Dmitry Eremin-Solenikov Signed-off-by: Linus Walleij Signed-off-by: Sebastian Reichel

power: supply: gpio-charger: Convert to GPIO descriptors

2020-08-27T14:47:14Z

This converts the GPIO charger to use exclusively GPIO descriptors, moving the two remaining platforms passing global GPIO numbers over to using a GPIO descriptor table. Signed-off-by: Linus Walleij Cc: Robert Jarzmik Cc: Dmitry Eremin-Solenikov Signed-off-by: Sebastian Reichel

treewide: Remove uninitialized_var() usage

2020-07-16T19:35:15Z

Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var$([^$]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe # IB Acked-by: Kalle Valo # wireless drivers Reviewed-by: Chao Yu # erofs Signed-off-by: Kees Cook

mm: pgtable: add shortcuts for accessing kernel PMD and PTE

2020-06-09T16:39:13Z

The powerpc 32-bit implementation of pgtable has nice shortcuts for accessing kernel PMD and PTE for a given virtual address. Make these helpers available for all architectures. [rppt@linux.ibm.com: microblaze: fix page table traversal in setup_rt_frame()] Link: http://lkml.kernel.org/r/20200518191511.GD1118872@kernel.org [akpm@linux-foundation.org: s/pmd_ptr_k/pmd_off_k/ in various powerpc places] Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-9-rppt@kernel.org Signed-off-by: Linus Torvalds