kernel/arch/arm/mach-omap1/time.c, branch linux-6.2.y

ARM: OMAP1: clock: Convert to CCF

2022-06-03T18:48:53Z

OMAP1 still uses its own implementation of standard clock API defined in include/linux/clk.h. Internals of that implementation are not visible outside OMAP1 directory. As a consequence, device drivers are not able to register clocks potentially provided by peripheral devices. Drop OMAP1 implementation of the clock API and enable common clock framework. Modify the remaining low level code to be compatible with clock provider API and register the clocks with CCF. Move initialisation of clocks to omap1_timer_init() to avoid memory allocation issues at early setup phase from where omap1_init_early() is called. Register the clocks after initialization of clock I/O registers, local clock pointers used by OMAP1 clock ops, and local .rate fields of clocks with no local implementation of .recalc ops, so CCF structures are populated with correct data during clock registration. Instead of enabling some of the registered clocks, flag them for CCF as critical. Introduce .is_enabled op using code that verifies hardware status of clock enablement, split out from implementation of .disable_unused op, so the latter is actually called by CCF for not requested but hardware enabled clocks. Add .round_rate ops where missing so .set_rate ops are called by CCF as expected. Since CCF allows parallel execution of .enable/.disable and .set_rate ops, protect registers shared among those groups of ops from concurrent access with spinlocks. Drop local debugfs support in favor of that provided by CCF. v2: flag tc2_ck as CLK_IS_CRITICAL (Aaro) v3: rebase on top of soc/omap1-multiplatform-5.18, - drop no longer needed includes from arch/arm/mach-omap1/io.c Signed-off-by: Janusz Krzysztofik Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann

ARM: omap1: move mach/*.h into mach directory

2022-04-22T09:08:55Z

Most of the header files are no longer referenced from outside arch/arm/mach-omap1, so move them all to that place directly and change their users to use the new location. The exceptions are: - mach/compress.h is used by the core architecture code - mach/serial.h is used by mach/compress.h The mach/memory.h is empty and gets removed in the process, avoiding the need for CONFIG_NEED_MACH_MEMORY_H. Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann

ARM: OMAP: replace setup_irq() by request_irq()

2020-03-04T16:30:30Z

request_irq() is preferred over setup_irq(). Invocations of setup_irq() occur after memory allocators are ready. Per tglx[1], setup_irq() existed in olden days when allocators were not ready by the time early interrupts were initialized. Hence replace setup_irq() by request_irq(). [1] https://lkml.kernel.org/r/alpine.DEB.2.20.1710191609480.1971@nanos Signed-off-by: afzal mohammed Signed-off-by: Tony Lindgren

ARM/omap1/time: Migrate to new 'set-state' interface

2015-07-17T02:56:24Z

Migrate omap driver to the new 'set-state' interface provided by clockevents core, the earlier 'set-mode' interface is marked obsolete now. This also enables us to implement callbacks for new states of clockevent devices, for example: ONESHOT_STOPPED. Acked-by: Santosh Shilimkar Acked-by: Tony Lindgren Signed-off-by: Viresh Kumar

ARM: OMAP1: Switch to sched_clock_register()

2013-11-21T23:41:00Z

The 32 bit sched_clock interface now supports 64 bits. Upgrade to the 64 bit function to allow us to remove the 32 bit registration interface. Cc: Tony Lindgren Signed-off-by: Stephen Boyd Signed-off-by: Kevin Hilman

ARM: OMAP: remove deprecated IRQF_DISABLED

2013-10-03T20:24:36Z

This patch proposes to remove the IRQF_DISABLED flag from OMAP code It's a NOOP since 2.6.35, and will be removed one day. Signed-off-by: Michael Opdenacker Signed-off-by: Tony Lindgren

sched_clock: Make ARM's sched_clock generic for all architectures

2013-06-12T21:02:13Z

Nothing about the sched_clock implementation in the ARM port is specific to the architecture. Generalize the code so that other architectures can use it by selecting GENERIC_SCHED_CLOCK. Signed-off-by: Stephen Boyd [jstultz: Merge minor collisions with other patches in my tree] Signed-off-by: John Stultz

Merge branch 'clocksource/cleanup' into next/cleanup

2013-01-14T18:20:02Z

Clockevent cleanup series from Shawn Guo. Resolved move/change conflict in mach-pxa/time.c due to the sys_timer cleanup. * clocksource/cleanup: clocksource: use clockevents_config_and_register() where possible ARM: use clockevents_config_and_register() where possible clockevents: export clockevents_config_and_register for module use + sync to Linux 3.8-rc3 Signed-off-by: Olof Johansson Conflicts: arch/arm/mach-pxa/time.c

ARM: use clockevents_config_and_register() where possible

2013-01-14T18:12:42Z

The clockevent core is able to figure out the best mult and shift, calculate min_delta_ns and max_delta_ns, with the necessary info passed into clockevents_config_and_register(). Use this combined configure and register function where possible to make the codes less error prone and gain some positive diff stat. Signed-off-by: Shawn Guo Cc: Nicolas Ferre Reviewed-by: Anton Vorontsov Acked-by: Kukjin Kim Cc: Russell King Cc: Sascha Hauer Cc: Jason Cooper Tested-by: Roland Stigge Acked-by: Eric Miao Cc: Haojian Zhuang Cc: David Brown Tested-by: Tony Lindgren Acked-by: Barry Song Tested-by: Stephen Warren Acked-by: Tony Prisk Cc: Lennert Buytenhek Cc: Wan ZongShun Acked-by: Viresh Kumar Acked-by: Arnd Bergmann Acked-by: Jason Cooper Reviewed-by: Thomas Gleixner Signed-off-by: Olof Johansson

ARM: delete struct sys_timer

2012-12-24T16:36:38Z

Now that the only field in struct sys_timer is .init, delete the struct, and replace the machine descriptor .timer field with the initialization function itself. This will enable moving timer drivers into drivers/clocksource without having to place a public prototype of each struct sys_timer object into include/linux; the intent is to create a single of_clocksource_init() function that determines which timer driver to initialize by scanning the device dtree, much like the proposed irqchip_init() at: http://www.spinics.net/lists/arm-kernel/msg203686.html Includes mach-omap2 fixes from Igor Grinberg. Tested-by: Robert Jarzmik Signed-off-by: Stephen Warren