kernel/arch/arm/mach-omap1/clock.h, branch linux-6.2.y

ARM: OMAP1: clock: Convert to CCF

2022-06-03T18:48:53Z

OMAP1 still uses its own implementation of standard clock API defined in include/linux/clk.h. Internals of that implementation are not visible outside OMAP1 directory. As a consequence, device drivers are not able to register clocks potentially provided by peripheral devices. Drop OMAP1 implementation of the clock API and enable common clock framework. Modify the remaining low level code to be compatible with clock provider API and register the clocks with CCF. Move initialisation of clocks to omap1_timer_init() to avoid memory allocation issues at early setup phase from where omap1_init_early() is called. Register the clocks after initialization of clock I/O registers, local clock pointers used by OMAP1 clock ops, and local .rate fields of clocks with no local implementation of .recalc ops, so CCF structures are populated with correct data during clock registration. Instead of enabling some of the registered clocks, flag them for CCF as critical. Introduce .is_enabled op using code that verifies hardware status of clock enablement, split out from implementation of .disable_unused op, so the latter is actually called by CCF for not requested but hardware enabled clocks. Add .round_rate ops where missing so .set_rate ops are called by CCF as expected. Since CCF allows parallel execution of .enable/.disable and .set_rate ops, protect registers shared among those groups of ops from concurrent access with spinlocks. Drop local debugfs support in favor of that provided by CCF. v2: flag tc2_ck as CLK_IS_CRITICAL (Aaro) v3: rebase on top of soc/omap1-multiplatform-5.18, - drop no longer needed includes from arch/arm/mach-omap1/io.c Signed-off-by: Janusz Krzysztofik Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann

ARM: OMAP1: clock: Remove noop code

2022-04-22T09:08:56Z

There are some OMAP1 clock code bits that have no effect: - crystal_type variable is set to 0 but never changed, then crystal_type == 2 condition is never true and ck_ref.rate never set to 19200000, - clk->ops->allow_idle() is called from omap_clk_enable_autoidle_all() but that op is not configured for any clock, then the function does nothing and the op field is not needed, - ENABLE_ON_INIT flag is set for some clocks but is never checked by any code, then not needed. Drop that code. Signed-off-by: Janusz Krzysztofik Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann

ARM: OMAP1: clock: Remove unused code

2022-04-22T09:08:56Z

The code of OMAP1 clocks contains quite a few unused elements: - functions and function like macros never called: clk_reparent(), recalculate_root_clocks(), clk_enable_init_clocks(), omap_clk_get_by_name(), omap_clk_disable_autoidle_all(), __clk_get_parent(clk), __clk_get_rate(), - unused structure fields: - clkops: .find_idlest(), .find_companion(), .deny_idle(), - clk: .src_offset, as well as .clkdm -- no longer present but still mentioned in comments, - definitions of unused flags: INVERT_ENABLE, CLOCK_CLKOUTX2, - definitions of unused data types: struct clk_functions, - prototypes of functions with no implementation: clk_init(), omap1_watchdog_recalc(). - declarations of never defined global variables: clkops_dummy. Drop them. Signed-off-by: Janusz Krzysztofik Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500

2019-06-19T15:09:55Z

Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Enrico Weigelt Reviewed-by: Kate Stewart Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman

ARM: OMAP: clock: Remove unused mpurate cmdline option

2017-01-24T15:20:02Z

The 'mpurate' option, historically used for specifying an initial MPU rate at boot, no longer has any effect due to the supporting code being removed as it was 'wrong and dangerous' [1]. This patch removes the remaining dead code associated with the __setup macros to avoid confusion and reduce bloat. [1] https://patchwork.kernel.org/patch/5954631/ Signed-off-by: Andrew Murray Acked-by: Aaro Koskinen Signed-off-by: Tony Lindgren

ARM: OMAP: clock: split plat/clkdev_omap.h into OMAP1/2 files

2012-10-18T23:23:30Z

To facilitate the ARM single image work, split arch/arm/plat-omap/include/plat/clkdev_omap.h into the arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h files. Signed-off-by: Paul Walmsley Signed-off-by: Tony Lindgren

ARM: OMAP: remove plat/clock.h

2012-10-18T23:23:20Z

Remove arch/arm/plat-omap/include/plat/clock.h by merging it into arch/arm/mach-omap1/clock.h and arch/arm/mach-omap2/clock.h. The goal here is to facilitate ARM single image kernels by removing includes via the "plat/" symlink. Signed-off-by: Paul Walmsley [tony@atomide.com: fixed to remove duplicate clock.h includes] Signed-off-by: Tony Lindgren

ARM: OMAP1: Move dpll1 rates selection from config to runtime

2011-12-09T02:02:23Z

For still better multi-OMAP1 support, expand omap1_rate_table with flags for different SoC types and match them while selecting clock rates. The idea is stolen from current omap24xx clock rate selection algorithm. Since clkdev platform flag definitions are reused here, those had to be expanded with one extra entry for OMAP1710 subtype, as this is the only SoC for which we allow selection of the highest, 216 MHz rate. Once done, remove no longer needed clock rate configure time options. Tested on Amstrad Delta. Signed-off-by: Janusz Krzysztofik [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren

ARM: OMAP: Fix reprogramming of dpll1 rate

2011-11-11T18:15:11Z

Commit a66cb3454f220f49f900646ebdc76cb943319eb7 (ARM: OMAP: Map SRAM later on with ioremap_exec()) moved the SRAM init to happen later to remove a dependency to early SoC detection for map_io. This broke booting on some boards not using Kconfig option for OMAP_CLOCKS_SET_BY_BOOTLOADER as the dpll1 reprogramming would cause the following error: kernel BUG at arch/arm/plat-omap/sram.c:226! Internal error: Oops - undefined instruction: 0 [#1] PREEMPT Modules linked in: CPU: 0 Not tainted (3.2.0-rc1-e3 #9) PC is at omap_sram_reprogram_clock+0x28/0x30 LR is at omap1_select_table_rate+0x88/0xb4 pc : [] lr : [] psr: 600000d3 sp : c035bf10 ip : c035bf20 fp : c035bf1c r10: c035bfd4 r9 : 54029252 r8 : c03f8120 r7 : c0362b50 r6 : 00b71b00 r5 : c03873cc r4 : c0362b40 r3 : 00000000 r2 : c0362b40 r1 : 0000010a r0 : 00002cb0 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 0000317f Table: 10004000 DAC: 00000017 Process swapper (pid: 0, stack limit = 0xc035a270) Stack: (0xc035bf10 to 0xc035c000) bf00: c035bf3c c035bf20 c0019f54 c001b0ac bf20: 00001000 00002cb3 00000004 c035ed4c c035bf74 c035bf40 c033ea24 c0019edc bf40: c02f526c 00000002 00000015 bc058c9b 93111a16 c035335c 02000000 c035ed4c bf60: c035ed4c c03f8120 c035bf84 c035bf78 c00194c4 c033e8ec c035bfc4 c035bf88 bf80: c033bc24 c00194a0 c035bf90 c035bf98 00000000 00000000 00000000 00000000 bfa0: 00000001 00000000 c0354678 c035ece4 10004000 103532f4 c035bff4 c035bfc8 bfc0: c0338574 c033b598 00000000 00000000 00000000 c035467c 0000317d c035c03c bfe0: c0354678 c035ece4 00000000 c035bff8 10008040 c0338508 00000000 00000000 Backtrace: [] (omap_sram_reprogram_clock+0x0/0x30) from [] (omap1_select_table_rate+0x88/0xb4) [] (omap1_select_table_rate+0x0/0xb4) from [] (omap1_clk_init+0x148/0x334) r7:c035ed4c r6:00000004 r5:00002cb3 r4:00001000 [] (omap1_clk_init+0x0/0x334) from [] (omap1_init_early+0x34/0x48) r8:c03f8120 r7:c035ed4c r6:c035ed4c r5:02000000 r4:c035335c [] (omap1_init_early+0x0/0x48) from [] (setup_arch+0x69c/0x79c) [] (setup_arch+0x0/0x79c) from [] (start_kernel+0x7c/0x2f4) [] (start_kernel+0x0/0x2f4) from [<10008040>] (0x10008040) r7:c035ece4 r6:c0354678 r5:c035c03c r4:0000317d Code: 0a000002 e1a0e00f e12fff13 e89da800 (e7f001f2) Fix this by adding omap1_clk_late_init() that only reprograms dpll1 if the bootloader rate is less than 60MHz. This also allows removing of the OMAP_CLOCKS_SET_BY_BOOTLOADER option. Reported-by: Aaro Koskinen Tested-by: Aaro Koskinen Signed-off-by: Tony Lindgren

OMAP1: clock: some cleanup

2010-07-26T22:34:28Z

Convert most of the magic numbers in mach-omap1/clock_data.c to use macros. Clean up a few comments to conform with Documentation/CodingStyle. Mark the current clkops_uart as being OMAP16xx-only, and add some comments to indicate that it does not belong there, for future cleanup. This patch should not cause any functional changes. Signed-off-by: Paul Walmsley