kernel/arch/arm/mach-omap1/Makefile, branch linux-6.2.y

ARM: omap1: fix !ARCH_OMAP1_ANY link failures

2023-01-10T22:05:26Z

While compile-testing randconfig builds for the upcoming boardfile removal, I noticed that an earlier patch of mine was completely broken, and the introduction of CONFIG_ARCH_OMAP1_ANY only replaced one set of build failures with another one, now resulting in link failures like ld: drivers/video/fbdev/omap/omapfb_main.o: in function `omapfb_do_probe': drivers/video/fbdev/omap/omapfb_main.c:1703: undefined reference to `omap_set_dma_priority' ld: drivers/dma/ti/omap-dma.o: in function `omap_dma_free_chan_resources': drivers/dma/ti/omap-dma.c:777: undefined reference to `omap_free_dma' drivers/dma/ti/omap-dma.c:1685: undefined reference to `omap_get_plat_info' ld: drivers/usb/gadget/udc/omap_udc.o: in function `next_in_dma': drivers/usb/gadget/udc/omap_udc.c:820: undefined reference to `omap_get_dma_active_status' I tried reworking it, but the resulting patch ended up much bigger than simply avoiding the original problem of unused-function warnings like arch/arm/mach-omap1/mcbsp.c:76:30: error: unused variable 'omap1_mcbsp_ops' [-Werror,-Wunused-variable] As a result, revert the previous fix, and rearrange the code that produces warnings to hide them. For mcbsp, the #ifdef check can simply be removed as the cpu_is_omapxxx() checks already achieve the same result, while in the io.c the easiest solution appears to be to merge the common map bits into each soc specific portion. This gets cleaned in a nicer way after omap7xx support gets dropped, as the remaining SoCs all have the exact same I/O map. Fixes: 615dce5bf736 ("ARM: omap1: fix build with no SoC selected") Cc: stable@vger.kernel.org Acked-by: Aaro Koskinen Signed-off-by: Arnd Bergmann

ARM: omap1: fix build with no SoC selected

2022-04-22T09:08:55Z

In a multiplatform randconfig kernel, one can have CONFIG_ARCH_OMAP1 enabled, but none of the specific SoCs. This leads to some build issues as the code is not meant to deal with this configuration at the moment: arch/arm/mach-omap1/io.c:86:20: error: unused function 'omap1_map_common_io' [-Werror,-Wunused-function] arch/arm/mach-omap1/pm.h:113:2: error: "Power management for this processor not implemented yet" [-Werror,-W#warnings] Use the same trick as on OMAP2 and guard the actual compilation of platform code with another Makefile ifdef check based on an option that depends on having at least one SoC enabled. The io.c file still needs to get compiled to allow building device drivers with a dependency on CONFIG_ARCH_OMAP1. Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann

ARM: omap1: move plat/dma.c to mach/omap-dma.c

2022-04-22T09:08:55Z

Most of the interface functions in plat/dma.c are only used from the USB driver, which is practically OMAP1 specific, except for compile testing. The omap_get_plat_info(), omap_request_dma() and omap_free_dma() functions are never called on omap2 because of runtime checks. Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann

ARM: omap1: move lcd_dma code into omapfb driver

2022-04-21T13:00:45Z

The omapfb driver is split into platform specific code for omap1, and driver code that is also specific to omap1. Moving both parts into the driver directory simplifies the structure and avoids the dependency on certain omap machine header files. As mach/lcd_dma.h can not be included from include/linux/omap-dma.h any more now, move the omap_lcd_dma_running() declaration into the omap-dma header, which matches where it is defined. Acked-by: Bartlomiej Zolnierkiewicz Acked-by: Tony Lindgren Signed-off-by: Arnd Bergmann

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2019-01-01T01:27:54Z

Pull arm SoC platform updates from Olof Johansson: "SoC updates, mostly refactorings and cleanups of old legacy platforms, but also a few more things: New SoC support this release: - NXP/Freescale i.MX7ULP (1x Cortex-A7, Cortex-M4, graphics, etc) - Allwinner F1C100, older platform with an ARM926-EJS (ARMv5) core Cleanups of various platforms: - OMAP1 ams-delta does some GPIO cleanups - Davinci removes of at24 platform data - Samsung cleans up old wakeup, PM debug and secondary core boot code - Renesas moves around config options and PM code to drivers/soc for sharing with 64-bit and more consistency - i.MX, Broadcom and SoCFPGA all have tweaks to lowlevel debug console setups - SoCFPGA adds explicit selection of ARM errata and removes some unused code This also contains a few patches that I had queued up as fixes for 4.20 but didn't send in before the release" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (68 commits) arm64: dts: renesas: draak: Fix CVBS input ARM: omap2: avoid section mismatch warning ARM: tegra: avoid section mismatch warning ARM: ks8695: fix section mismatch warning ARM: pxa: avoid section mismatch warning ARM: mmp: fix pxa168_device_usb_phy use on aspenite ARM: mmp: fix timer_init calls ARM: OMAP1: fix USB configuration for device-only setups ARM: OMAP1: add MMC configuration for Palm Tungsten E ARM: imx: fix dependencies on imx7ulp ARM: meson: select HAVE_ARM_TWD and ARM_GLOBAL_TIMER MAINTAINERS: add drivers/soc/amlogic/ to amlogic list ARM: imx: add initial support for imx7ulp ARM: debug-imx: only define DEBUG_IMX_UART_PORT if needed ARM: dts: Fix OMAP4430 SDP Ethernet startup ARM: dts: am335x-pdu001: Fix polarity of card detection input ARM: OMAP1: ams-delta: Fix audio permanently muted ARM: dts: omap5: Fix dual-role mode on Super-Speed port arm64: dts: rockchip: fix rk3399-rockpro64 regulator gpios ARM: davinci: da850-evm: remove unnecessary include ...

ARM: OMAP1: Makefile: Update for new MCBSP Kconfig option

2018-12-18T12:22:53Z

The MCBSP config option has been changed. Signed-off-by: Peter Ujfalusi Acked-by: Tony Lindgren Signed-off-by: Mark Brown

ARM: OMAP1: fix USB configuration for device-only setups

2018-12-11T16:14:23Z

Currently we do USB configuration only if the host mode (CONFIG_USB) is enabled. But it should be done also in the case of device-only setups, so change the condition to CONFIG_USB_SUPPORT. This allows to use omap_udc on Palm Tungsten E. Signed-off-by: Aaro Koskinen Signed-off-by: Tony Lindgren

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ARM: OMAP1: Remove board support for VoiceBlue board

2015-10-12T17:36:55Z

Remove board support files for 10 years discontinued VoiceBlue board. Signed-off-by: Ladislav Michl Signed-off-by: Tony Lindgren

mailbox/omap: move the OMAP mailbox framework to drivers

2013-06-11T16:41:51Z

The mailbox hardware (in OMAP) uses a queued mailbox interrupt mechanism that provides a communication channel between processors through a set of registers and their associated interrupt signals by sending and receiving messages. The OMAP mailbox framework/driver code is moved to be under drivers/mailbox, in preparation for adapting to a common mailbox driver framework. This allows the build for OMAP mailbox to be enabled (it was disabled during the multi-platform support). As part of the migration from plat and mach code: - Kconfig symbols have been renamed to build OMAP1 or OMAP2+ drivers. - mailbox.h under plat-omap/plat/include has been split into a public and private header files. The public header has only the API related functions and types. - The module name mailbox.ko from plat-omap is changed to omap-mailbox.ko - The module name mailbox_mach.ko from mach-omapX is changed as mailbox_omap1.ko for OMAP1 mailbox_omap2.ko for OMAP2+ Cc: Tony Lindgren [gregkh@linuxfoundation.org: ack for staging part] Acked-by: Greg Kroah-Hartman Signed-off-by: Omar Ramirez Luna Signed-off-by: Suman Anna