kernel/arch/arm/mach-imx/src.c, branch 0x221E-v0.0.1-v6.19

ARM: imx: register reset controller from a platform driver

2021-10-15T01:38:06Z

Starting with commit 6b2117ad65f1 ("of: property: fw_devlink: Add support for "resets" and "pwms""), the imx-drm driver fails to load due to forever dormant devlinks to the reset-controller node. This node was never associated with a struct device. Add a platform device to allow fw_devnode to activate the devlinks. Fixes: 6b2117ad65f1 ("of: property: fw_devlink: Add support for "resets" and "pwms"") Signed-off-by: Philipp Zabel Tested-by: Fabio Estevam Reviewed-by: Saravana Kannan Signed-off-by: Shawn Guo

ARM: imx: add smp support for imx7d

2021-06-12T04:02:57Z

Add SMP support for i.MX7D, including CPU hotplug support, for systems where TFA is not present. The motivation for bringing up the second i.MX7D core inside the kernel is that legacy vendor bootloaders usually do not implement PSCI support. This is a significant blocker for systems in the field that are running old bootloader versions to upgrade to a modern mainline kernel version, as only one CPU of the i.MX7D would be brought up. Bring up the second i.MX7D core inside the kernel to make the migration path to mainline kernel easier for the existing iMX7D users. Signed-off-by: Anson Huang Signed-off-by: Arulpandiyan Vadivel # Fix merge conflicts Signed-off-by: Leonard Crestez Signed-off-by: Marek Vasut # heavy cleanup Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo

ARM: imx: Drop unnecessary src_base check

2020-03-11T07:18:17Z

src_base is already checked during src driver initialization, no need to check its availability again when using it. Signed-off-by: Anson Huang Signed-off-by: Shawn Guo

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 159

2019-05-30T18:26:37Z

Based on 1 normalized pattern(s): the code contained herein is licensed under the gnu general public license you may obtain a copy of the gnu general public license version 2 or later at the following locations http www opensource org licenses gpl license html http www gnu org copyleft gpl html extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 161 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Richard Fontana Reviewed-by: Allison Randal Reviewed-by: Kate Stewart Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.383790741@linutronix.de Signed-off-by: Greg Kroah-Hartman

ARM: 8641/1: treewide: Replace uses of virt_to_phys with __pa_symbol

2017-02-28T11:06:10Z

All low-level PM/SMP code using virt_to_phys() should actually use __pa_symbol() against kernel symbols. Update code where relevant to move away from virt_to_phys(). Acked-by: Russell King Reviewed-by: Laura Abbott Signed-off-by: Florian Fainelli Signed-off-by: Russell King

ARM: imx: Make reset_control_ops const

2016-02-29T02:37:44Z

The imx_src_ops structure is never modified. Make it const. Signed-off-by: Philipp Zabel Signed-off-by: Shawn Guo

ARM: imx: remove imx_src_prepare_restart() call

2013-11-11T14:58:43Z

There is ~10% possibility that the following emergency restart command fails to reboot imx6q. $ echo b > /proc/sysrq-trigger The IMX restart routine mxc_restart() assumes that it will always run on primary core, and will call imx_src_prepare_restart() to disable secondary cores in order to get them come to online in the following boot. However, the assumption is only true for normal kernel_restart() case where migrate_to_reboot_cpu() will be called to migrate to primary core, but not necessarily true for emergency_restart() case. So when emergency_restart() calls into mxc_restart() on any secondary core, system will hang immediately once imx_src_prepare_restart() is called to disabled secondary cores. Since emergency_restart() is defined as a function that is safe to call in interrupt context, we cannot just call migrate_to_reboot_cpu() to fix the issue. Fortunately, we just found that the issue can be fixed at imx6q platform level. We used to call imx_src_prepare_restart() to disable all secondary cores before resetting hardware. Otherwise, the secondary will fail come to online in the reboot. However, we recently found that after commit 6050d18 (ARM: imx: reset core along with enable/disable operation) comes to play, we do not need to reset the secondary cores any more. That said, mxc_restart() now can run on any core to reboot the system, as long as we remove the imx_src_prepare_restart() call from mxc_restart(). So let's simply remove imx_src_prepare_restart() call to fix the above emergency restart failure. Reported-by: Jiada Wang Signed-off-by: Shawn Guo

ARM: imx: reset core along with enable/disable operation

2013-10-21T01:37:32Z

From hotplug stress test result, resetting core during enable/disable operation can improve cpu hotplug stability. So let's set SRC reset bit in imx_enable_cpu() for the core when its enable bit is accessed. Signed-off-by: Shawn Guo

Merge tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2013-05-07T18:02:18Z

Pull ARM SoC platform updates (part 3) from Arnd Bergmann: "This is the third and smallest of the SoC specific updates. Changes include: - SMP support for the Xilinx zynq platform - Smaller imx changes - LPAE support for mvebu - Moving the orion5x, kirkwood, dove and mvebu platforms to a common "mbus" driver for their internal devices. It would be good to get feedback on the location of the "mbus" driver. Since this is used on multiple platforms may potentially get shared with other architectures (powerpc and arm64), it was moved to drivers/bus/. We expect other similar drivers to get moved to the same place in order to avoid creating more top-level directories under drivers/ or cluttering up the messy drivers/misc/ even more." * tag 'soc-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (50 commits) ARM: imx: reset_controller may be disabled ARM: mvebu: Align the internal registers virtual base to support LPAE ARM: mvebu: Limit the DMA zone when LPAE is selected arm: plat-orion: remove addr-map code arm: mach-mv78xx0: convert to use the mvebu-mbus driver arm: mach-orion5x: convert to use mvebu-mbus driver arm: mach-dove: convert to use mvebu-mbus driver arm: mach-kirkwood: convert to use mvebu-mbus driver arm: mach-mvebu: convert to use mvebu-mbus driver ARM i.MX53: set CLK_SET_RATE_PARENT flag on the tve_ext_sel clock ARM i.MX53: tve_di clock is not part of the CCM, but of TVE ARM i.MX53: make tve_ext_sel propagate rate change to PLL ARM i.MX53: Remove unused tve_gate clkdev entry ARM i.MX5: Remove tve_sel clock from i.MX53 clock tree ARM: i.MX5: Add PATA and SRTC clocks ARM: imx: do not bring up unavailable cores ARM: imx: add initial imx6dl support ARM: imx1: mm: add call to mxc_device_init ARM: imx_v4_v5_defconfig: Add CONFIG_GPIO_SYSFS ARM: imx_v6_v7_defconfig: Select CONFIG_PERF_EVENTS ...

ARM: imx: reset_controller may be disabled

2013-05-02T19:50:06Z

The new reset controller API is optional, so if that is disabled, we must not call it from platform code. arch/arm/mach-imx/built-in.o: In function `imx_src_init': /git/arm-soc/arch/arm/mach-imx/src.c:144: undefined reference to `reset_controller_register' Cc: Sascha Hauer Signed-off-by: Arnd Bergmann