kernel/arch/arm/mach-imx/common.h, branch linux-6.2.y

ARM: imx: common: Move prototype outside the SMP block

2021-07-14T07:28:43Z

Currently the imx_gpcv2_set_core1_pdn_pup_by_software() prototype is guarded by the CONFIG_SMP symbol. This causes W=1 build warnings when CONFIG_SMP is not selected: arch/arm/mach-imx/src.c:103:6: warning: no previous prototype for 'imx_gpcv2_set_core1_pdn_pup_by_software' [-Wmissing-prototypes] Fix it by moving the imx_gpcv2_set_core1_pdn_pup_by_software() prototype outside of the CONFIG_SMP block. Fixes: e34645f45805 ("ARM: imx: add smp support for imx7d") Reported-by: kernel test robot Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo

ARM: imx: add smp support for imx7d

2021-06-12T04:02:57Z

Add SMP support for i.MX7D, including CPU hotplug support, for systems where TFA is not present. The motivation for bringing up the second i.MX7D core inside the kernel is that legacy vendor bootloaders usually do not implement PSCI support. This is a significant blocker for systems in the field that are running old bootloader versions to upgrade to a modern mainline kernel version, as only one CPU of the i.MX7D would be brought up. Bring up the second i.MX7D core inside the kernel to make the migration path to mainline kernel easier for the existing iMX7D users. Signed-off-by: Anson Huang Signed-off-by: Arulpandiyan Vadivel # Fix merge conflicts Signed-off-by: Leonard Crestez Signed-off-by: Marek Vasut # heavy cleanup Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo

ARM: imx: avic: Convert to using IRQCHIP_DECLARE

2021-03-15T04:21:18Z

Using IRQCHIP_DECLARE lets fw_devlink know that it should not wait for these interrupt controllers to be populated as struct devices. Without this change, fw_devlink=on will make the consumers of these interrupt controllers wait for the struct device to be added and thereby block the consumers' probes forever. Converting to IRQCHIP_DECLARE addresses boot issues on imx25 with fw_devlink=on that were reported by Martin. This also removes a lot of boilerplate code. Fixes: e590474768f1 ("driver core: Set fw_devlink=on by default") Reported-by: Martin Kaiser Signed-off-by: Saravana Kannan Tested-by: Martin Kaiser Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo

clk: imx: Move 'imx6sl_set_wait_clk()'s prototype out to accessible header

2021-01-30T14:13:23Z

Fixes the following W=1 kernel build warning(s): drivers/clk/imx/clk-imx6sl.c:156:6: warning: no previous prototype for ‘imx6sl_set_wait_clk’ [-Wmissing-prototypes] Cc: Russell King Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Ahmad Fatoum Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones Signed-off-by: Shawn Guo

ARM: imx: Remove remnant board file support pieces

2020-09-13T03:16:03Z

Since i.MX board files are gone, remove some remnant pieces of board file support. Signed-off-by: Fabio Estevam Acked-by: Arnd Bergmann Signed-off-by: Shawn Guo

ARM: imx3: Remove imx3 soc_init()

2020-09-13T03:15:54Z

imx31_soc_init() and imx35_soc_init() were only used by i.MX31/35 board files. Since the board files users are gone, it is safe to remove imx3 soc_init() functions. Signed-off-by: Fabio Estevam Acked-by: Arnd Bergmann Signed-off-by: Shawn Guo

ARM: imx27: Get rid of mm-imx27.c

2020-09-13T03:15:45Z

Get rid of mm-imx27.c and move its code to the mach-imx27.c file. This aligns with other i.MX SoC code. Signed-off-by: Fabio Estevam Acked-by: Arnd Bergmann Signed-off-by: Shawn Guo

ARM: imx27: Remove imx27_soc_init()

2020-09-13T03:15:26Z

imx27_soc_init() was only used by i.MX27 board files. Since the board files users are gone, it is safe to remove imx27_soc_init() too. Signed-off-by: Fabio Estevam Acked-by: Arnd Bergmann Signed-off-by: Shawn Guo

ARM: imx: use device_initcall for imx_soc_device_init

2020-05-20T15:03:42Z

This is preparation to move imx_soc_device_init to drivers/soc/imx/ There is no reason to must put dt devices under /sys/devices/soc0, they could also be under /sys/devices/platform, so we could pass NULL as parent when calling of_platform_default_populate. Following soc-imx8.c soc-imx-scu.c using device_initcall, need to change return type to int type for imx_soc_device_init. Signed-off-by: Peng Fan Signed-off-by: Shawn Guo

ARM: imx: build v7_cpu_resume() unconditionally

2020-02-13T13:21:44Z

This function is not only needed by the platform suspend code, but is also reused as the CPU resume function when the ARM cores can be powered down completely in deep idle, which is the case on i.MX6SX and i.MX6UL(L). Providing the static inline stub whenever CONFIG_SUSPEND is disabled means that those platforms will hang on resume from cpuidle if suspend is disabled. So there are two problems: - The static inline stub masks the linker error - The function is not available where needed Fix both by just building the function unconditionally, when CONFIG_SOC_IMX6 is enabled. The actual code is three instructions long, so it's arguably ok to just leave it in for all i.MX6 kernel configurations. Fixes: 05136f0897b5 ("ARM: imx: support arm power off in cpuidle for i.mx6sx") Signed-off-by: Lucas Stach Signed-off-by: Ahmad Fatoum Signed-off-by: Rouven Czerwinski Signed-off-by: Shawn Guo