kernel/arch/arm/include/asm/xen, branch linux-4.15.y

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

xen: avoid type warning in xchg_xen_ulong

2017-06-08T22:07:38Z

The improved type-checking version of container_of() triggers a warning for xchg_xen_ulong, pointing out that 'xen_ulong_t' is unsigned, but atomic64_t contains a signed value: drivers/xen/events/events_2l.c: In function 'evtchn_2l_handle_events': drivers/xen/events/events_2l.c:187:1020: error: call to '__compiletime_assert_187' declared with attribute error: pointer type mismatch in container_of() This adds a cast to work around the warning. Cc: Ian Abbott Fixes: 85323a991d40 ("xen: arm: mandate EABI and use generic atomic operations.") Fixes: daa2ac80834d ("kernel.h: handle pointers to arrays better in container_of()") Signed-off-by: Arnd Bergmann Signed-off-by: Stefano Stabellini Reviewed-by: Stefano Stabellini Acked-by: Ian Abbott

arm/arm64: xen: Move shared architecture headers to include/xen/arm

2016-12-02T19:49:55Z

ARM and arm64 Xen ports share a number of headers, leading to packaging issues when these headers needs to be exported, as it breaks the reasonable requirement that an architecture port has self-contained headers. Fix the issue by moving the 5 header files to include/xen/arm, and keep local placeholders to include the relevant files. Signed-off-by: Marc Zyngier Reviewed-by: Stefano Stabellini

dma-mapping: use unsigned long for dma_attrs

2016-08-04T12:50:07Z

The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski Acked-by: Vineet Gupta Acked-by: Robin Murphy Acked-by: Hans-Christian Noren Egtvedt Acked-by: Mark Salter [c6x] Acked-by: Jesper Nilsson [cris] Acked-by: Daniel Vetter [drm] Reviewed-by: Bart Van Assche Acked-by: Joerg Roedel [iommu] Acked-by: Fabien Dessenne [bdisp] Reviewed-by: Marek Szyprowski [vb2-core] Acked-by: David Vrabel [xen] Acked-by: Konrad Rzeszutek Wilk [xen swiotlb] Acked-by: Joerg Roedel [iommu] Acked-by: Richard Kuo [hexagon] Acked-by: Geert Uytterhoeven [m68k] Acked-by: Gerald Schaefer [s390] Acked-by: Bjorn Andersson Acked-by: Hans-Christian Noren Egtvedt [avr32] Acked-by: Vineet Gupta [arc] Acked-by: Robin Murphy [arm64 and dma-iommu] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

arm/xen: add support for vm_assist hypercall

2016-07-06T09:42:14Z

Add support for the Xen HYPERVISOR_vm_assist hypercall. Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Reviewed-by: Julien Grall Reviewed-by: Stefano Stabellini Signed-off-by: David Vrabel

ARM64: XEN: Add a function to initialize Xen specific UEFI runtime services

2016-07-06T09:34:46Z

When running on Xen hypervisor, runtime services are supported through hypercall. Add a Xen specific function to initialize runtime services. Signed-off-by: Shannon Zhao Reviewed-by: Stefano Stabellini Tested-by: Julien Grall Acked-by: Catalin Marinas

Merge tag 'for-linus-4.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

2016-03-22T19:55:17Z

Pull xen updates from David Vrabel: "Features and fixes for 4.6: - Make earlyprintk=xen work for HVM guests - Remove module support for things never built as modules" * tag 'for-linus-4.6-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: drivers/xen: make platform-pci.c explicitly non-modular drivers/xen: make sys-hypervisor.c explicitly non-modular drivers/xen: make xenbus_dev_[front/back]end explicitly non-modular drivers/xen: make [xen-]ballon explicitly non-modular xen: audit usages of module.h ; remove unnecessary instances xen/x86: Drop mode-selecting ifdefs in startup_xen() xen/x86: Zero out .bss for PV guests hvc_xen: make early_printk work with HVM guests hvc_xen: fix xenboot for DomUs hvc_xen: add earlycon support

xen: audit usages of module.h ; remove unnecessary instances

2016-03-21T15:13:32Z

Code that uses no modular facilities whatsoever should not be sourcing module.h at all, since that header drags in a bunch of other headers with it. Similarly, code that is not explicitly using modular facilities like module_init() but only is declaring module_param setup variables should be using moduleparam.h and not the larger module.h file for that. In making this change, we also uncover an implicit use of BUG() in inline fcns within arch/arm/include/asm/xen/hypercall.h so we explicitly source for that file now. Signed-off-by: Paul Gortmaker Reviewed-by: Stefano Stabellini Signed-off-by: David Vrabel

xen/arm: correctly handle DMA mapping of compound pages

2016-02-08T17:19:27Z

Currently xen_dma_map_page concludes that DMA to anything other than the head page of a compound page must be foreign, since the PFN of the page is that of the head. Fix the check to instead consider the whole of a compound page to be local if the PFN of the head passes the 1:1 check. We can never see a compound page which is a mixture of foreign and local sub-pages. The comment already correctly described the intention, but fixup the spelling and some grammar. This fixes the various SSH protocol errors which we have been seeing on the cubietrucks in our automated test infrastructure. This has been broken since commit 3567258d281b ("xen/arm: use hypercall to flush caches in map_page"), which was in v3.19-rc1. NB arch/arm64/.../xen/page-coherent.h also includes this file. Signed-off-by: Ian Campbell Reviewed-by: Stefano Stabellini Cc: xen-devel@lists.xenproject.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org # v3.19+

arm: extend pvclock_wall_clock with sec_hi

2015-12-21T14:40:57Z

The hypervisor actually exposes an additional field to struct pvclock_wall_clock, with the high 32 bit seconds. Signed-off-by: Stefano Stabellini Reviewed-by: Julien Grall