kernel/arch/arm/include/asm/efi.h, branch linux-5.14.y

efi: arm: force use of unsigned type for EFI_PHYS_ALIGN

2020-12-14T15:25:06Z

Ensure that EFI_PHYS_ALIGN is an unsigned type, to prevent spurious warnings from the type checks in the definition of the max() macro. Link: https://lore.kernel.org/linux-efi/20201213151306.73558-1-ardb@kernel.org Signed-off-by: Ard Biesheuvel

efi: stub: get rid of efi_get_max_fdt_addr()

2020-12-09T07:37:27Z

Now that ARM started following the example of arm64 and RISC-V, and no longer imposes any restrictions on the placement of the FDT in memory at boot, we no longer need per-arch implementations of efi_get_max_fdt_addr() to factor out the differences. So get rid of it. Signed-off-by: Ard Biesheuvel Reviewed-by: Atish Patra Link: https://lore.kernel.org/r/20201029134901.9773-1-ardb@kernel.org

efi: arm: reduce minimum alignment of uncompressed kernel

2020-12-09T07:37:27Z

Now that we reduced the minimum relative alignment between PHYS_OFFSET and PAGE_OFFSET to 2 MiB, we can take this into account when allocating memory for the decompressed kernel when booting via EFI. This minimizes the amount of unusable memory we may end up with due to the base of DRAM being occupied by firmware. Signed-off-by: Ard Biesheuvel

efi: capsule: clean scatter-gather entries from the D-cache

2020-12-09T07:37:27Z

Scatter-gather lists passed to UpdateCapsule() should be cleaned from the D-cache to ensure that they are visible to the CPU after a warm reboot before the MMU is enabled. On ARM and arm64 systems, this implies a D-cache clean by virtual address to the point of coherency. However, due to the fact that the firmware itself is not able to map physical addresses back to virtual addresses when running under the OS, this must be done by the caller. Signed-off-by: Ard Biesheuvel

efi/libstub: arm32: Base FDT and initrd placement on image address

2020-09-16T15:53:42Z

The way we use the base of DRAM in the EFI stub is problematic as it is ill defined what the base of DRAM actually means. There are some restrictions on the placement of FDT and initrd which are defined in terms of dram_base, but given that the placement of the kernel in memory is what defines these boundaries (as on ARM, this is where the linear region starts), it is better to use the image address in these cases, and disregard dram_base altogether. Reviewed-by: Maxim Uvarov Tested-by: Maxim Uvarov Signed-off-by: Ard Biesheuvel

efi/libstub: arm: Print CPU boot mode and MMU state at boot

2020-06-17T13:29:11Z

On 32-bit ARM, we may boot at HYP mode, or with the MMU and caches off (or both), even though the EFI spec does not actually support this. While booting at HYP mode is something we might tolerate, fiddling with the caches is a more serious issue, as disabling the caches is tricky to do safely from C code, and running without the Dcache makes it impossible to support unaligned memory accesses, which is another explicit requirement imposed by the EFI spec. So take note of the CPU mode and MMU state in the EFI stub diagnostic output so that we can easily diagnose any issues that may arise from this. E.g., EFI stub: Entering in SVC mode with MMU enabled Also, capture the CPSR and SCTLR system register values at EFI stub entry, and after ExitBootServices() returns, and check whether the MMU and Dcache were disabled at any point. If this is the case, a diagnostic message like the following will be emitted: efi: [Firmware Bug]: EFI stub was entered with MMU and Dcache disabled, please fix your firmware! efi: CPSR at EFI stub entry : 0x600001d3 efi: SCTLR at EFI stub entry : 0x00c51838 efi: CPSR after ExitBootServices() : 0x600001d3 efi: SCTLR after ExitBootServices(): 0x00c50838 Signed-off-by: Ard Biesheuvel Reviewed-by: Leif Lindholm

mm: reorder includes after introduction of linux/pgtable.h

2020-06-09T16:39:13Z

The replacement of with made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s

" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include " % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds

mm: introduce include/linux/pgtable.h

2020-06-09T16:39:13Z

The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport Signed-off-by: Andrew Morton Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brian Cain Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Ungerer Cc: Guan Xuetao Cc: Guo Ren Cc: Heiko Carstens Cc: Helge Deller Cc: Ingo Molnar Cc: Ley Foon Tan Cc: Mark Salter Cc: Matthew Wilcox Cc: Matt Turner Cc: Max Filippov Cc: Michael Ellerman Cc: Michal Simek Cc: Nick Hu Cc: Paul Walmsley Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Stafford Horne Cc: Thomas Bogendoerfer Cc: Thomas Gleixner Cc: Tony Luck Cc: Vincent Chen Cc: Vineet Gupta Cc: Will Deacon Cc: Yoshinori Sato Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds

efi/libstub: unify EFI call wrappers for non-x86

2020-04-23T18:15:06Z

We have wrappers around EFI calls so that x86 can define special versions for mixed mode, while all other architectures can use the same simple definition that just issues the call directly. In preparation for the arrival of yet another architecture that doesn't need anything special here (RISC-V), let's move the default definition into a shared header. Signed-off-by: Ard Biesheuvel

efi/libstub: Rename efi_call_early/_runtime macros to be more intuitive

2019-12-25T09:49:25Z

The macros efi_call_early and efi_call_runtime are used to call EFI boot services and runtime services, respectively. However, the naming is confusing, given that the early vs runtime distinction may suggest that these are used for calling the same set of services either early or late (== at runtime), while in reality, the sets of services they can be used with are completely disjoint, and efi_call_runtime is also only usable in 'early' code. So do a global sweep to replace all occurrences with efi_bs_call or efi_rt_call, respectively, where BS and RT match the idiom used by the UEFI spec to refer to boot time or runtime services. While at it, use 'func' as the macro parameter name for the function pointers, which is less likely to collide and cause weird build errors. Signed-off-by: Ard Biesheuvel Cc: Arvind Sankar Cc: Borislav Petkov Cc: James Morse Cc: Matt Fleming Cc: Thomas Gleixner Cc: linux-efi@vger.kernel.org Link: https://lkml.kernel.org/r/20191224151025.32482-24-ardb@kernel.org Signed-off-by: Ingo Molnar