kernel/arch/arm/boot/dts, branch linux-4.15.y

ARM: dts: ls1021a: add "fsl,ls1021a-esdhc" compatible string to esdhc node

2018-04-12T10:31:01Z

[ Upstream commit d5c7b4d5ac2237a6da7ced3adfe6b8bf769f8cc6 ] Commit a22950c888e3 (mmc: sdhci-of-esdhc: add quirk SDHCI_QUIRK_BROKEN_TIMEOUT_VAL for ls1021a) added logic to the driver to enable the broken timeout val quirk for ls1021a, but did not add the corresponding compatible string to the device tree, so it didn't really have any effect. Fix that. Signed-off-by: Rasmus Villemoes Signed-off-by: Shawn Guo Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Revert "ARM: dts: omap3-n900: Fix the audio CODEC's reset pin"

2018-04-08T12:27:40Z

This reverts commit c91a501768717f449acd1c2cff1a8531e486c441 which was commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 upstream. It requires a driver that was not merged until 4.16, so remove it from this stable tree as it is pointless. Reported-by: Ben Hutchings Cc: Andrew F. Davis Cc: Tony Lindgren Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Revert "ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin"

2018-04-08T12:27:40Z

This reverts commit cc578825b46e984c19b4a4630d3191d60ff83642 which was comit e153db03c6b7a035c797bcdf35262586f003ee93 upstream. It requires a driver that was not merged until 4.16, so remove it from this stable tree as it is pointless. Reported-by: Ben Hutchings Cc: Andrew F. Davis Cc: Tony Lindgren Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: DRA76-EVM: Set powerhold property for tps65917

2018-04-08T12:27:40Z

commit aac4619d028e2c444ac1217fc2d05b0322079dff upstream. Set powerhold property for tps65917 Signed-off-by: Keerthy Signed-off-by: Tony Lindgren Cc: Ben Hutchings Signed-off-by: Greg Kroah-Hartman

ARM: dts: sun6i: a31s: bpi-m2: add missing regulators

2018-04-08T12:27:32Z

commit 70b8d21496758dd7ff600ec9de0ee3812fac7a40 upstream. This patch fixes a bootproblem with the Bananapi M2 board. Since there are some regulators missing we add them right now. Those values come from the schematic, below you can find a small overview: * reg_aldo1: 3,3V, powers the wifi * reg_aldo2: 2,5V, powers the IO of the RTL8211E * reg_aldo3: 3,3V, powers the audio * reg_dldo1: 3,0V, powers the RTL8211E * reg_dldo2: 2,8V, powers the analog part of the csi * reg_dldo3: 3,3V, powers misc * reg_eldo1: 1,8V, powers the csi * reg_ldo_io1:1,8V, powers the gpio * reg_dc5ldo: needs to be always on This patch updates also the vmmc-supply properties on the mmc0 and mmc2 node to use the allready existent regulators. We can now remove the sunxi-common-regulators.dtsi include since we don't need it anymore. Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2") Cc: Signed-off-by: Philipp Rossak Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman

ARM: dts: sun6i: a31s: bpi-m2: improve pmic properties

2018-04-08T12:27:32Z

commit b23af6ad8d2f708c4c3f92dd8f82c233247ba8bf upstream. The eldoin is supplied from the dcdc1 regulator. The N_VBUSEN pin is connected to an external power regulator (SY6280AAC). With this commit we update the pmic binding properties to support those features. Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2") Cc: Signed-off-by: Philipp Rossak Signed-off-by: Maxime Ripard Signed-off-by: Greg Kroah-Hartman

ARM: dts: aspeed-evb: Add unit name to memory node

2018-03-24T10:02:51Z

[ Upstream commit e40ed274489a5f516da120186578eb379b452ac6 ] Fixes a warning when building with W=1. All of the ASPEED device trees build without warnings now. Signed-off-by: Joel Stanley Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: omap3-n900: Fix the audio CODEC's reset pin

2018-03-19T08:09:53Z

[ Upstream commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 ] The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here. Fixes: 14e3e295b2b9 ("ARM: dts: omap3-n900: Add TLV320AIC3X support") Signed-off-by: Andrew F. Davis Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin

2018-03-19T08:09:53Z

[ Upstream commit e153db03c6b7a035c797bcdf35262586f003ee93 ] The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here. Fixes: 4341881d0562 ("ARM: dts: Add devicetree for Gumstix Pepper board") Signed-off-by: Andrew F. Davis Signed-off-by: Tony Lindgren Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ARM: dts: exynos: Correct Trats2 panel reset line

2018-03-19T08:09:50Z

[ Upstream commit 1b377924841df1e13ab5b225be3a83f807a92b52 ] Trats2 uses gpf2-1 as the panel reset GPIO. gpy4-5 was only used on early revisions of the board. Fixes: 420ae8451a22 ("ARM: dts: exynos4412-trats2: add panel node") Signed-off-by: Simon Shields Acked-by: Marek Szyprowski Tested-by: Marek Szyprowski Signed-off-by: Krzysztof Kozlowski Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman