kernel/Documentation/usb, branch linux-6.9.y

Documentation: usb: Document FunctionFS DMABUF API

2024-02-17T16:00:09Z

Add documentation for the three ioctls used to attach or detach externally-created DMABUFs, and to request transfers from/to previously attached DMABUFs. Signed-off-by: Paul Cercueil Link: https://lore.kernel.org/r/20240130122340.54813-5-paul@crapouillou.net Signed-off-by: Greg Kroah-Hartman

Merge 6.8-rc3 into usb-next

2024-02-04T14:19:37Z

We need the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_fs: expose ready state in configfs

2024-01-28T01:39:21Z

When a USB gadget is configured through configfs with 1 or more f_fs functions, then the logic setting up the gadget configuration has to wait until the user space code (typically separate applications) responsible for those functions have written their descriptors before the gadget can be activated. The f_fs instance already knows if this has been done, so expose it through a "ready" attribute in configfs for easier synchronization. Signed-off-by: Peter Korsgaard Link: https://lore.kernel.org/r/20240126203208.2482573-1-peter@korsgaard.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: ncm: Fix indentations in documentation of NCM section

2024-01-28T00:27:58Z

Currently, the section of NCM which describes attributes are having wrong indentation. Fix this by following the correct format recommended. Fixes: 1900daeefd3e ("usb: gadget: ncm: Add support to update wMaxSegmentSize via configfs") Reported-by: Stephen Rothwell Closes: https://lore.kernel.org/all/20240108160221.743649b5@canb.auug.org.au/ Signed-off-by: Udipto Goswami Link: https://lore.kernel.org/r/20240108132720.7786-1-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman

usb: gadget: ncm: Add support to update wMaxSegmentSize via configfs

2024-01-04T15:01:14Z

The max segment size is currently limited to the ethernet frame length of the kernel which happens to be 1514 at this point in time. However the NCM specification limits it to 64K for sixtenn bit NTB's. For peer to peer connections, increasing the segment size gives better throughput. Add support to configure this value before configfs symlink is created. Also since the NTB Out/In buffer sizes are fixed at 16384 bytes, limit the segment size to an upper cap of 8000 to allow at least a minimum of 2 MTU sized datagrams to be aggregated. Set the default MTU size for the ncm interface during function bind before network interface is registered allowing MTU to be set in parity with wMaxSegmentSize. Update gadget documentation describing the new configfs property. Signed-off-by: Krishna Kurapati Link: https://lore.kernel.org/r/20231221153216.18657-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman

usb: raw-gadget: update documentation

2023-11-22T12:02:54Z

A recent patch added reporting of more event types to Raw Gadget. Update the documentation to reflect that this feature has been implemented. Signed-off-by: Andrey Konovalov Link: https://lore.kernel.org/r/20231030223158.36636-1-andrey.konovalov@linux.dev Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-11-04T02:00:42Z

Pull USB/Thunderbolt updates from Greg KH: "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1. Nothing really major in here, just lots of constant development for new hardware. Included in here are: - Thunderbolt (i.e. USB4) fixes for reported issues and support for new hardware types and devices - USB typec additions of new drivers and cleanups for some existing ones - xhci cleanups and expanded tracing support and some platform specific updates - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio, spi, and i2c drivers for that type of device (all acked by the respective subsystem maintainers.) - lots of USB gadget driver updates and cleanups - new USB dwc3 platforms supported, as well as other dwc3 fixes and cleanups - USB chipidea driver updates - other smaller driver cleanups and additions, full details in the shortlog All of these have been in the linux-next tree for a while with no reported problems" * tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits) usb: gadget: uvc: Add missing initialization of ssp config descriptor usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility usb: raw-gadget: report suspend, resume, reset, and disconnect events usb: raw-gadget: don't disable device if usb_ep_queue fails usb: raw-gadget: properly handle interrupted requests usb:cdnsp: remove TRB_FLUSH_ENDPOINT command usb: gadget: aspeed_udc: Convert to platform remove callback returning void dt-bindings: usb: fsa4480: Add compatible for OCP96011 usb: typec: fsa4480: Add support to swap SBU orientation dt-bindings: usb: fsa4480: Add data-lanes property to endpoint usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm() Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller" Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport" thunderbolt: Fix one kernel-doc comment usb: gadget: f_ncm: Always set current gadget in ncm_bind() usb: core: Remove duplicated check in usb_hub_create_port_device usb: typec: tcpm: Add additional checks for contaminant arm64: dts: rockchip: rk3588s: Add USB3 host controller usb: dwc3: add optional PHY interface clocks dt-bindings: usb: add rk3588 compatible to rockchip,dwc3 ...

docs: usb: fix reference to nonexistent file in UVC Gadget

2023-10-23T02:41:01Z

Fix a typo in the path of this reference. Fixes: 094f391013ba ("docs: usb: Add documentation for the UVC Gadget") Cc: Daniel Scally Cc: Greg Kroah-Hartman Signed-off-by: Vegard Nossum Signed-off-by: Jonathan Corbet Message-ID: <20231022185311.919325-1-vegard.nossum@oracle.com>

usb: gadget: f_uac2: allow changing terminal types through configfs

2023-10-05T07:35:43Z

Add "c_terminal_type" and "p_terminal_type" configfs entries in order to allow the user to change the capture and playback terminal type codes. These fields affect the type of audio device that Windows detects, so being able to modify this is useful when it would be advantageous for a gadget to be detected as something other than a generic speaker/microphone. The fields default to microphone for the capture type field and speaker for the playback type field as was the case before. Signed-off-by: James Gruber Link: https://lore.kernel.org/r/20230914222746.155126-1-jimmyjgruber@gmail.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2023-09-01T16:23:34Z

Pull USB / Thunderbolt / PHY driver updates from Greg KH: "Here is the big set of USB, Thunderbolt, and PHY driver updates for 6.6-rc1. Included in here are: - PHY driver additions and cleanups - Thunderbolt minor additions and fixes - USB MIDI 2 gadget support added - dwc3 driver updates and additions - Removal of some old USB wireless code that was missed when that codebase was originally removed a few years ago, cleaning up some core USB code paths - USB core potential use-after-free fixes that syzbot from different people/groups keeps tripping over - typec updates and additions - gadget fixes and cleanups - loads of smaller USB core and driver cleanups all over the place Full details are in the shortlog. All of these have been in linux-next for a while with no reported problems" * tag 'usb-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits) platform/chrome: cros_ec_typec: Configure Retimer cable type tcpm: Avoid soft reset when partner does not support get_status usb: typec: tcpm: reset counter when enter into unattached state after try role usb: typec: tcpm: set initial svdm version based on pd revision USB: serial: option: add FOXCONN T99W368/T99W373 product USB: serial: option: add Quectel EM05G variant (0x030e) usb: dwc2: add pci_device_id driver_data parse support usb: gadget: remove max support speed info in bind operation usb: gadget: composite: cleanup function config_ep_by_speed_and_alt() usb: gadget: config: remove max speed check in usb_assign_descriptors() usb: gadget: unconditionally allocate hs/ss descriptor in bind operation usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind() usb: gadget: add a inline function gether_bitrate() usb: gadget: use working speed to calcaulate network bitrate and qlen dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 support usb: dwc3: exynos: Add support for Exynos850 variant usb: gadget: udc-xilinx: fix incorrect type in assignment warning usb: gadget: udc-xilinx: fix cast from restricted __le16 warning usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warning USB: dwc2: hande irq on dead controller correctly ...