kernel/Documentation/input, branch linux-4.16.y

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2018-02-01T18:49:58Z

Pull input layer updates from Dmitry Torokhov: - evdev interface has been adjusted to extend the life of timestamps on 32 bit systems to the year of 2108 - Synaptics RMI4 driver's PS/2 guest handling ha beed updated to improve chances of detecting trackpoints on the pass-through port - mms114 touchcsreen controller driver has been updated to support generic device properties and work with mms152 cntrollers - Goodix driver now supports generic touchscreen properties - couple of drivers for AVR32 architecture are gone as the architecture support has been removed from the kernel - gpio-tilt driver has been removed as there are no mainline users and the driver itself is using legacy APIs and relies on platform data - MODULE_LINECSE/MODULE_VERSION cleanups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (45 commits) Input: goodix - use generic touchscreen_properties Input: mms114 - fix typo in definition Input: mms114 - use BIT() macro instead of explicit shifting Input: mms114 - replace mdelay with msleep Input: mms114 - add support for mms152 Input: mms114 - drop platform data and use generic APIs Input: mms114 - mark as direct input device Input: mms114 - do not clobber interrupt trigger Input: edt-ft5x06 - fix error handling for factory mode on non-M06 Input: stmfts - set IRQ_NOAUTOEN to the irq flag Input: auo-pixcir-ts - delete an unnecessary return statement Input: auo-pixcir-ts - remove custom log for a failed memory allocation Input: da9052_tsi - remove unused mutex Input: docs - use PROPERTY_ENTRY_U32() directly Input: synaptics-rmi4 - log when we create a guest serio port Input: synaptics-rmi4 - unmask F03 interrupts when port is opened Input: synaptics-rmi4 - do not delete interrupt memory too early Input: ad7877 - use managed resource allocations Input: stmfts,s6sy671 - add SPDX identifier Input: remove atmel-wm97xx touchscreen driver ...

Input: docs - use PROPERTY_ENTRY_U32() directly

2018-01-23T00:27:58Z

Instead of using PROPERTY_ENTRY_INTEGER() with explicitly supplied type, use PROPERTY_ENTRY_U32() dedicated macro. It will help modify internals of built-in device properties API. No functional change intended. Signed-off-by: Andy Shevchenko Signed-off-by: Dmitry Torokhov

Input: fix small typos in force feedback documentation

2018-01-19T17:35:23Z

Fix small typos in the Instructions and Uploading sections. Fix a typo in the start/stop effect example usage code. Signed-off-by: Jean-François Têtu Signed-off-by: Dmitry Torokhov

Input: gpio_tilt - delete driver

2018-01-02T06:54:42Z

This driver was merged in 2011 as a tool for detecting the orientation of a screen. The device driver assumes board file setup using the platform data from . But no boards in the kernel tree defines this platform data. As I am faced with refactoring drivers to use GPIO descriptors and pass decriptor tables from boards, or use the device tree device drivers like these creates a serious problem: I cannot fix them and cannot test them, not even compile-test them with a system actually using it (no in-tree boardfile). I suggest to delete this driver and rewrite it using device tree if it is still in use on actively maintained systems. I can also offer to rewrite it out of the blue using device tree if someone promise to test it and help me iterate it. Signed-off-by: Linus Walleij Acked-by: Heiko Stuebner Patchwork-Id: 10133609 Signed-off-by: Dmitry Torokhov

HID: hid-multitouch: support fine-grain orientation reporting

2017-12-01T09:01:01Z

The current hid-multitouch driver only allow the report of two orientations, vertical and horizontal. We use the Azimuth orientation usage 0x3F under the Digitizer usage page to report orientation if the device supports it. Changelog: v1 -> v2: - Fix commit message. - Remove resolution reporting for ABS_MT_ORIENTATION. v2 -> v3: - Fix commit message. v3 -> v4: - Fix ABS_MT_ORIENTATION ABS param range. - Don't set ABS_MT_ORIENTATION in ABS_DG_HEIGHT when it is already set by ABS_DG_AZIMUTH. v4 -> v5: - Improve multi-touch-protocol.rst documentation. Signed-off-by: Wei-Ning Huang Signed-off-by: Wei-Ning Huang Reviewed-by: Dmitry Torokhov Reviewed-by: Henrik Rydberg Signed-off-by: Jiri Kosina

Documentation: fix input related doc refs

2017-10-12T17:14:06Z

Make `input` document refs valid including: - joystick - joystick-parport Signed-off-by: Tom Saeger Reviewed-by: Takashi Iwai Signed-off-by: Jonathan Corbet

Documentation:input: fix typo

2017-08-30T21:18:24Z

Signed-off-by: John de la Garza Signed-off-by: Jonathan Corbet

docs: fix nested numbering in the TOC

2017-08-24T19:32:26Z

With Sphinx 1.6 nested numbering is reported as warning:: ./input/joydev/index.rst:13: WARNING: input/joydev/joystick-api is already assigned section numbers (nested numbered toctree?) ./media/uapi/cec/cec-funcs.rst:8: WARNING: media/uapi/cec/cec-func-open is already assigned section numbers (nested numbered toctree?) ./media/uapi/cec/cec-funcs.rst:8: WARNING: media/uapi/cec/cec-func-close is already assigned section numbers (nested numbered toctree?) ./media/uapi/cec/cec-funcs.rst:8: WARNING: media/uapi/cec/cec-func-ioctl is already assigned section numbers (nested numbered toctree?) ./media/uapi/cec/cec-funcs.rst:8: WARNING: media/uapi/cec/cec-func-poll is already assigned section numbers (nested numbered toctree?) ./media/uapi/cec/cec-funcs.rst:8: WARNING: media/uapi/cec/cec-ioc-adap-g-caps is already assigned section numbers (nested numbered toctree?) ./media/uapi/cec/cec-funcs.rst:8: WARNING: media/uapi/cec/cec-ioc-adap-g-log-addrs is already assigned section numbers (nested numbered toctree?) ./media/uapi/cec/cec-funcs.rst:8: WARNING: media/uapi/cec/cec-ioc-adap-g-phys-addr is already assigned section numbers (nested numbered toctree?) ./media/uapi/cec/cec-funcs.rst:8: WARNING: media/uapi/cec/cec-ioc-dqevent is already assigned section numbers (nested numbered toctree?) ./media/uapi/cec/cec-funcs.rst:8: WARNING: media/uapi/cec/cec-ioc-g-mode is already assigned section numbers (nested numbered toctree?) ./media/uapi/cec/cec-funcs.rst:8: WARNING: media/uapi/cec/cec-ioc-receive is already assigned section numbers (nested numbered toctree?) TOC numbering is already set in:: ./input/devices/index.rst:9: ./media/uapi/cec/cec-api.rst:19: I guess the nested numbering in: ./input/joydev/index.rst ./media/uapi/cec/cec-funcs.rst is just a C&P typo, so lets remove it. Signed-off-by: Markus Heiser Signed-off-by: Jonathan Corbet

Merge tag '4.13-fixes' of git://git.lwn.net/linux

2017-07-13T20:44:54Z

Pull documentation fixes from Jonathan Corbet: "A set of fixes for various warnings, including the one caused by the removal of kernel/rcu/srcu.c. Also correct a stray pointer in memory-barriers.txt" * tag '4.13-fixes' of git://git.lwn.net/linux: kokr/memory-barriers.txt: Fix obsolete link to atomic_ops.txt memory-barriers.txt: Fix broken link to atomic_ops.txt docs: Turn off section numbering for the input docs docs: Include uaccess docs from the right file docs: Do not include from kernel/rcu/srcu.c

docs: Turn off section numbering for the input docs

2017-07-12T22:51:44Z

The input docs enable section numbering at multiple levels, leading to a lot of bright-red "nested numbered toctree" warnings in newer Sphinx versions. Just take that directive out for now to help alleviate the global red-pixel shortage. Signed-off-by: Jonathan Corbet