kernel/Documentation/gpu/index.rst, branch linux-5.1.y

drm: Begin an API for in-kernel clients

2018-07-10T12:51:37Z

This the beginning of an API for in-kernel clients. First out is a way to get a framebuffer backed by a dumb buffer. Only GEM drivers are supported. The original idea of using an exported dma-buf was dropped because it also creates an anonomous file descriptor which doesn't work when the buffer is created from a kernel thread. The easy way out is to use drm_driver.gem_prime_vmap to get the virtual address, which requires a GEM object. This excludes the vmwgfx driver which is the only non-GEM driver apart from the legacy ones. A solution for vmwgfx will have to be worked out later if it wants to support the client API which it probably will when we have a bootsplash client. Suggested-by: Daniel Vetter Signed-off-by: Noralf Trønnes Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20180703160354.59955-2-noralf@tronnes.org

drm/doc: Put all driver docs into a separate chapter

2018-03-19T13:43:11Z

We have quite a few driver docs now, which is great, but having them all in the top-level gpu documentation chapter makes it harder to spot the core/shared bits. Stuff them into a separate chapter and ecourage people to add even more! Reviewed-by: Alex Deucher Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20180316075926.13584-1-daniel.vetter@ffwll.ch

drm/tve200: Add new driver for TVE200

2017-08-23T21:08:36Z

This adds a new DRM driver for the Faraday Technology TVE200 block. This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in the StorLink SL3516 (later Cortina Systems CS3516) as well as the Grain Media GM8180. I do not have definitive word from anyone at Faraday that this IP block is theirs, but it bears the hallmark of their 3-digit version code (200) and is used in two SoCs from completely different companies. (Grain Media was fully owned by Faraday until it was transferred to NovoTek this january, and Faraday did lots of work on the StorLink SoCs.) The D-Link DIR-685 uses this in connection with the Ilitek ILI9322 panel driver that supports BT.656 input, while the GM8180 apparently has been used with the Cirrus Logic CS4954 digital video encoder. The oldest user seems to be something called Techwall 2835. This driver is heavily inspired by Eric Anholt's PL111 driver and therefore I have mentioned all the ancestor authors in the header file. Acked-by: Daniel Vetter Reviewed-by: Eric Anholt Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20170820100557.24991-2-linus.walleij@linaro.org

Merge tag 'drm/tegra/for-4.13-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

2017-06-20T01:07:03Z

drm/tegra: Changes for v4.13-rc1 This starts off with the addition of more documentation for the host1x and DRM drivers and finishes with a slew of fixes and enhancements for the staging IOCTLs as a result of the awesome work done by Dmitry and Erik on the grate reverse-engineering effort. * tag 'drm/tegra/for-4.13-rc1' of git://anongit.freedesktop.org/tegra/linux: gpu: host1x: At first try a non-blocking allocation for the gather copy gpu: host1x: Refactor channel allocation code gpu: host1x: Remove unused host1x_cdma_stop() definition gpu: host1x: Remove unused 'struct host1x_cmdbuf' gpu: host1x: Check waits in the firewall gpu: host1x: Correct swapped arguments in the is_addr_reg() definition gpu: host1x: Forbid unrelated SETCLASS opcode in the firewall gpu: host1x: Forbid RESTART opcode in the firewall gpu: host1x: Forbid relocation address shifting in the firewall gpu: host1x: Do not leak BO's phys address to userspace gpu: host1x: Correct host1x_job_pin() error handling gpu: host1x: Initialize firewall class to the job's one drm/tegra: dc: Disable plane if it is invisible drm/tegra: dc: Apply clipping to the plane drm/tegra: dc: Avoid reset asserts on Tegra20 drm/tegra: Check syncpoint ID in the 'submit' IOCTL drm/tegra: Correct copying of waitchecks and disable them in the 'submit' IOCTL drm/tegra: Check for malformed offsets and sizes in the 'submit' IOCTL drm/tegra: Add driver documentation gpu: host1x: Flesh out kerneldoc

drm/tegra: Add driver documentation

2017-06-15T11:58:56Z

Adds some driver documentation for Tegra. It provides a short overview of the hardware and software architectures. Signed-off-by: Thierry Reding Acked-by: Daniel Vetter Signed-off-by: Thierry Reding

drm/pl111: Initial drm/kms driver for pl111

2017-05-08T19:24:06Z

This is a modesetting driver for the pl111 CLCD display controller found on various ARM platforms such as the Versatile Express. The driver has only been tested on the bcm911360_entphn platform so far, with PRIME-based buffer sharing between vc4 and clcd. It reuses the existing devicetree binding, while not using quite as many of its properties as the fbdev driver does (those are left for future work). v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks to DRM core's excellent new helpers. v3: Don't match pl110 any more, don't attach if we don't have a DRM panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple display helper, use drm_gem_cma_dumb_create (same as our wrapper). v4: Change the driver's .name to not clash with fbdev in sysfs, drop platform alias, drop redundant "drm" in DRM driver name, hook up .prepare_fb to the CMA helper so that DMA fences should work. v5: Move register definitions inside the driver directory, fix build in COMPILE_TEST and !AMBA mode. v6: Drop TIM2_CLKSEL for now to be consistent with existing DT bindings, switch back to external register definitions. Signed-off-by: Tom Cooksey Signed-off-by: Eric Anholt Reviewed-by: Linus Walleij (v5) Acked-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net

drm/meson: Add RST to bring together kerneldoc

2017-04-04T15:49:31Z

Acked-by: Daniel Vetter Signed-off-by: Neil Armstrong

drm: bridge: dw-hdmi: Add Documentation on supported input formats

2017-04-04T15:48:21Z

This patch adds a new DRM documentation entry and links to the input format table added in the dw_hdmi header. Reviewed-by: Archit Taneja Acked-by: Laurent Pinchart Signed-off-by: Neil Armstrong

drm/vc4: Add RST to bring together vc4 kerneldoc.

2017-02-28T20:51:48Z

This doesn't yet produce coherent documentation of the module, but at least gets the kerneldoc built and somewhat glued together. Signed-off-by: Eric Anholt Acked-by: Daniel Vetter Link: http://patchwork.freedesktop.org/patch/msgid/20170227201144.10970-3-eric@anholt.net

Merge airlied/drm-next into drm-misc-next

2017-02-26T20:34:42Z

Backmerge the main pull request to sync up with all the newly landed drivers. Otherwise we'll have chaos even before 4.12 started in earnest. Signed-off-by: Daniel Vetter