kernel/Documentation/devicetree, branch linux-4.15.y

serial: 8250: Add Nuvoton NPCM UART

2018-04-08T12:27:37Z

commit f597fbce38d230af95384f4a04e0a13a1d0ad45d upstream. The Nuvoton UART is almost compatible with the 8250 driver when probed via the 8250_of driver, however it requires some extra configuration at startup. Reviewed-by: Rob Herring Signed-off-by: Joel Stanley Cc: stable Signed-off-by: Greg Kroah-Hartman

dt-bindings: display: panel: Fix compatible string for Toshiba LT089AC29000

2018-03-24T10:02:50Z

[ Upstream commit 81ee6f1ef9b1e93b2dc0a77211e9809ffbeb7ecb ] The compatible string for this panel was specified as toshiba,lt089ac29000.txt. I believe this is a mistake. Fixes: 06e733e41f87 ("drm/panel: simple: add Toshiba LT089AC19000") Cc: Lucas Stach Signed-off-by: Jonathan Neuschäfer Acked-by: Lucas Stach Signed-off-by: Rob Herring Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

omapdrm: panel: fix compatible vendor string for td028ttec1

2018-03-24T10:02:48Z

[ Upstream commit c1b9d4c75cd549e08bd0596d7f9dcc20f7f6e8fa ] The vendor name was "toppoly" but other panels and the vendor list have defined it as "tpo". So let's fix it in driver and bindings. We keep the old definition in parallel to stay compatible with potential older DTB setup. Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tomi Valkeinen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: fix the STM32F7 DWC2 OTG HS core binding

2018-03-21T11:05:47Z

commit 4c437920fa216f66f6a5d469cae2a0360cc2d9c7 upstream. This patch fixes binding documentation for DWC2 controller in HS mode found on STMicroelectronics STM32F7 SoC. The v2 former patch [1] had been acked by Rob Herring, but v1 was merged. [1] https://patchwork.kernel.org/patch/9925575/ Fixes: 000777dadc7e ("dt-bindings: usb: Document the STM32F7xx DWC2 ...") Signed-off-by: Amelie Delaunay Reviewed-by: Rob Herring Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

dt-bindings: serial: Add common rs485 binding for RTS polarity

2018-03-19T08:09:51Z

[ Upstream commit 6abe9ea8a5a5904d935b8a482117a7fd9b25f09e ] rs485 allows for robust half-duplex serial communication. It is often implemented by attaching an rs485 transceiver to a UART. The UART's RTS line is wired to the transceiver's Transmit Enable pin and determines whether the transceiver is sending or receiving. Examples for such transceivers are Maxim MAX13451E and TI SN65HVD1781A: https://datasheets.maximintegrated.com/en/ds/MAX13450E-MAX13451E.pdf http://www.ti.com/lit/ds/symlink/sn65hvd1781a-q1.pdf In the devicetree, the transceiver itself is not represented, only the UART is. A few rs485-specific dt-bindings already exist and these go into the UART's device node. This commit adds a binding to set the RTS polarity. Most (if not all) transceivers require the Transmit Enable pin be driven high for sending, but in some cases boards may negate the pin and RTS must then be driven low. Consequently the polarity defaults to active high but can be inverted with the newly added "rs485-rts-active-low" binding. Document this binding in rs485.txt and in the two drivers fsl-imx-uart and fsl-lpuart that are about to be amended with support for it. Curiously, the omap_serial driver defaults to active low and already supports an "rs485-rts-active-high" binding to invert the polarity. This is left unchanged to retain compatibility, but the binding is herewith documented. Cc: Mark Jackson Cc: Michał Oleszczyk Cc: Rafael Gago Castano Cc: Sascha Hauer Acked-by: Rob Herring Signed-off-by: Lukas Wunner Acked-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

usb: host: xhci-rcar: add support for r8a77965

2018-03-19T08:09:46Z

commit 015dbeb2282030bf56762e21d25f09422edfd750 upstream. This patch adds support for r8a77965 (R-Car M3-N). Signed-off-by: Yoshihiro Shimoda Reviewed-by: Simon Horman Reviewed-by: Rob Herring Cc: stable Signed-off-by: Greg Kroah-Hartman

dt-bindings: Document mti,mips-cpc binding

2018-03-15T09:56:53Z

commit aece34cd576c7625181b0488a8129c1e165355f7 upstream. Document a binding for the MIPS Cluster Power Controller (CPC) that allows the device tree to specify where the CPC registers are located. Signed-off-by: Paul Burton Signed-off-by: Aleksandar Markovic Reviewed-by: Rob Herring Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/18512/ Signed-off-by: James Hogan Signed-off-by: Greg Kroah-Hartman

arm: spear13xx: Fix dmas cells

2018-02-22T14:39:57Z

commit cdd10409914184c7eee5ae3e11beb890c9c16c61 upstream. The "dmas" cells for the designware DMA controller need to have only 3 properties apart from the phandle: request line, src master and destination master. But the commit 6e8887f60f60 updated it incorrectly while moving from platform code to DT. Fix it. Cc: stable@vger.kernel.org # v3.10+ Fixes: 6e8887f60f60 ("ARM: SPEAr13xx: Pass generic DW DMAC platform data from DT") Reported-by: Arnd Bergmann Signed-off-by: Viresh Kumar Signed-off-by: Olof Johansson Signed-off-by: Greg Kroah-Hartman

media: dt-bindings/media/cec-gpio.txt: mention the CEC/HPD max voltages

2018-02-16T19:06:54Z

commit dac15ed62dc9d7898d3695a3c393d6f712d66185 upstream. Mention the maximum voltages of the CEC and HPD lines. Since in the example these lines are connected to a Raspberry Pi and the Rpi GPIO lines are 3.3V it is a good idea to warn against directly connecting the HPD to the Raspberry Pi's GPIO line. Signed-off-by: Hans Verkuil Reviewed-by: Rob Herring Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

Merge tag 'sound-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2017-12-27T20:59:27Z

Pull sound fixes from Takashi Iwai: "It seems that Santa overslept with a bunch of gifts; the majority of changes here are various device-specific ASoC fixes, most notably the revert of rcar IOMMU support and fsl_ssi AC97 fixes, but also lots of small fixes for codecs. Besides that, the usual HD-audio quirks and fixes are included, too" * tag 'sound-4.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (31 commits) ALSA: hda - Fix missing COEF init for ALC225/295/299 ALSA: hda: Drop useless WARN_ON() ALSA: hda - change the location for one mic on a Lenovo machine ALSA: hda - fix headset mic detection issue on a Dell machine ALSA: hda - Add MIC_NO_PRESENCE fixup for 2 HP machines ASoC: rsnd: fixup ADG register mask ASoC: rt5514-spi: only enable wakeup when fully initialized ASoC: nau8825: fix issue that pop noise when start capture ASoC: rt5663: Fix the wrong result of the first jack detection ASoC: rsnd: ssi: fix race condition in rsnd_ssi_pointer_update ASoC: Intel: Change kern log level to avoid unwanted messages ASoC: atmel-classd: select correct Kconfig symbol ASoC: wm_adsp: Fix validation of firmware and coeff lengths ASoC: Intel: Skylake: Do not check dev_type for dmic link type ASoC: rockchip: disable clock on error ASoC: tlv320aic31xx: Fix GPIO1 register definition ASoC: codecs: msm8916-wcd: Fix supported formats ASoC: fsl_asrc: Fix typo in a field define ASoC: rsnd: ssiu: clear SSI_MODE for non TDM Extended modes ASoC: da7218: Correct IRQ level in DT binding example ...