kernel/Documentation/devicetree/bindings/usb, branch linux-5.1.y

dt-bindings: usb: ci-hdrc-usb2: add property power-active-high

2019-02-27T14:51:01Z

The i.MX USB controller may drive the usb power line directly, but the polarity depends on the board. Reset state of the polarity is low-active so add this property to allow it to be high-active. Signed-off-by: Philipp Puschmann Reviewed-by: Rob Herring Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman

Merge tag 'usb-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

2019-02-15T08:08:57Z

Felipe writes: USB: changes for v5.1 merge window Dwc3 now works on TI's AM6xx platforms. Also on dwc3 we have a few changes which improve request cancellation and some improvements to how we print to the trace buffer. Renesas_usb3 got support for r8a774c0 device. Dwc2 got scatter-gather support. Apart from these, the usual set of minor fixes and all sorts of small details. * tag 'usb-for-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (40 commits) usb: phy: twl6030-usb: fix possible use-after-free on remove usb: misc: usbtest: add super-speed isoc support usb: dwc3: Reset num_trbs after skipping usb: dwc3: gadget: don't enable interrupt when disabling endpoint fotg210-udc: pass struct device to DMA API functions fotg210-udc: remove a bogus dma_sync_single_for_device call usb: gadget: Change Andrzej Pietrasiewicz's e-mail address usb: f_fs: Avoid crash due to out-of-scope stack ptr access usb: dwc3: haps: Workaround matching VID PID usb: gadget: f_fs: preserve wMaxPacketSize across usb_ep_autoconfig() call usb: gadget: move non-super speed code out of usb_ep_autoconfig_ss() usb: gadget: function: sync f_uac1 ac header baInterfaceNr usb: dwc2: gadget: Add scatter-gather mode usb: gadget: fix various indentation issues usb: dwc2: Fix EP TxFIFO number setting udc: net2280: Fix net2280_disable USB: gadget: Improve kerneldoc for usb_ep_dequeue() usb: dwc3: debug: purge usage of strcat usb: dwc3: trace: pass trace buffer size to decoding functions usb: dwc3: gadget: remove DWC3_EP_END_TRANSFER_PENDING ...

Documentation: dt: Add binding info for jz4740-musb driver

2019-02-12T07:54:44Z

This commit adds documentation for the device-tree bindings of the jz4740-musb driver, which provides support for the USB gadget mode of the JZ4740 and similar SoCs from Ingenic. Signed-off-by: Paul Cercueil Reviewed-by: Rob Herring Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: renesas_usbhs: Add r8a774c0 support

2019-01-28T10:51:30Z

Document RZ/G2E (R8A774C0) SoC bindings. Reviewed-by: Rob Herring Reviewed-by: Simon Horman Reviewed-by: Yoshihiro Shimoda Signed-off-by: Fabrizio Castro Signed-off-by: Felipe Balbi

usb: gadget: udc: renesas_usb3: Add bindings for r8a774c0

2019-01-28T10:51:30Z

Document RZ/G2E (R8A774C0) SoC bindings. Reviewed-by: Rob Herring Reviewed-by: Simon Horman Reviewed-by: Yoshihiro Shimoda Signed-off-by: Fabrizio Castro Signed-off-by: Felipe Balbi

dt-bindings: usb: keystone-usb: Add ti,am654-dwc3 support

2019-01-28T10:51:29Z

The AM654 SoC from TI contains a DWC3 controller. Add support for it. Reviewed-by: Rob Herring Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi

dt-bindings: usb: Add support for msm8998

2019-01-28T10:51:29Z

msm8998 USB has a dwc3 controller just like the existing sdm845 support. Signed-off-by: Jeffrey Hugo Reviewed-by: Bjorn Andersson Signed-off-by: Felipe Balbi

dt-bindings: usb: usb251xb: add documentation for data lane swapping

2019-01-18T09:00:49Z

Add optional binding to allow USB differential-pair (D+/D-) data lane swapping. The swapping can be specified for each port separately, default is no swapping. Signed-off-by: Marco Felsch Reviewed-by: Richard Leitner Reviewed-by: Rob Herring Signed-off-by: Greg Kroah-Hartman

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2019-01-01T01:36:02Z

Pull ARM Device-tree updates from Olof Johansson: "As usual, this is where the bulk of our changes end up landing each merge window. The individual updates are too many to enumerate, many many platforms have seen additions of device descriptions such that they are functionally more complete (in fact, this is often the bulk of updates we see). Instead I've mostly focused on highlighting the new platforms below as they are introduced. Sometimes the introduction is of mostly a fragment, that later gets filled in on later releases, and in some cases it's near-complete platform support. The latter is more common for derivative platforms that already has similar support in-tree. Two SoCs are slight outliers from the usual range of additions. Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping in the Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at infrastructure/networking. TI updates stick out in the diff stats too, in particular because they have moved the description of their L4 on-chip interconnect to devicetree, which opens up for removal of even more of their platform-specific 'hwmod' description tables over the next few releases. SoCs: - Qualcomm QCS404 (4x Cortex-A53) - Allwinner T3 (rebranded R40) and f1c100s (armv5) - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4) - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72) New platforms: - Rockchip: Gru Scarlet (RK3188 Tablet) - Amlogic: Phicomm N1 (S905D), Libretech S805-AC - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708) - Qualcomm: QCS404 base platform and EVB - Qualcomm: Remove of Arrow SD600 - PXA: First PXA3xx DT board: Raumfeld - Aspeed: Facebook Backpack-CMM BMC - Renesas iWave G20D-Q7 (RZ/G1N) - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s) - Allwinner Emlid Neutis N5, Mapleboard MP130 - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE) - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva - VF610: Liebherr's BK4 device, ZII SCU4 AIB board - i.MX7D PICO Hobbit baseboard - i.MX7ULP EVK board - NXP LX2160AQDS and LX2160ARDB boards Other: - Coresight binding updates across the board - CPU cooling maps updates across the board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits) ARM: dts: suniv: Fix improper bindings include patch ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node ARM: dts: suniv: Fix improper bindings include patch arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller arm64: dts: Remove unused properties from FSL QSPI driver nodes ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes ARM: dts: Remove unused properties from FSL QSPI driver nodes arm64: dts: ti: k3-am654: Enable main domain McSPI0 arm64: dts: ti: k3-am654: Add McSPI DT nodes arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM arm64: dts: ti: k3-am65-main: Add ECAP PWM node arm64: dts: ti: k3-am654-base-board: Add I2C nodes arm64: dts: ti: am654-base-board: Add pinmux for main uart0 arm64: dts: ti: k3-am65: Add pinctrl regions dt-bindings: pinctrl: k3: Introduce pinmux definitions ARM: dts: exynos: Specify I2S assigned clocks in proper node ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2 ...

Merge tag 'usb-ci-v4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next

2018-12-17T12:58:44Z

Peter writes: - Improve the over-current handling for imx - Add the HSIC support for imx * tag 'usb-ci-v4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb: usb: chipidea: imx: allow to configure oc polarity on i.MX25 usb: chipidea: imx: Warn if oc polarity isn't specified usb: chipidea: imx: support configuring for active low oc signal doc: usb: ci-hdrc-usb2: Add pinctrl properties for HSIC pin groups usb: chipidea: host: override ehci->hub_control usb: chipidea: imx: add HSIC support usb: chipidea: add flag for imx hsic implementation