kernel/Documentation/devicetree/bindings/usb/generic-ohci.yaml, branch linux-6.2.y

dt-bindings: usb: Add H616 compatible string

2022-11-07T19:06:35Z

The Allwinner H616 contains four fully OHCI/EHCI compatible USB host controllers, so just add their compatible strings to the list of generic OHCI/EHCI controllers. Signed-off-by: Andre Przywara Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20221031111358.3387297-2-andre.przywara@arm.com Signed-off-by: Jernej Skrabec

dt-bindings: Remove 'Device Tree Bindings' from end of title:

2022-08-25T19:06:57Z

As indicated in link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/ DT schema files should not have 'Device Tree Binding' as part of there title: line. Remove this in most .yaml files, so hopefully preventing developers copying it into new .yaml files, and being asked to remove it. Signed-off-by: Andrew Lunn Link: https://lore.kernel.org/r/20220825020427.3460650-1-andrew@lunn.ch Signed-off-by: Rob Herring

Merge tag 'sunxi-dt-for-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

2022-07-11T15:32:03Z

- whitespace fixes - replaced RTC indexes with constants - gpio-key nodes aligned with dtschema - fixed LED node for Orange Pi Win - added OPP table for R40 CPU and thermal points - updated I2C controller compatibles - added compatibles for MBUS, D1 DE2 clocks, D1 USB - enable internal HMIC bias on Pinephone * tag 'sunxi-dt-for-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: pinephone: Enable internal HMIC bias dt-bindings: arm: sunxi: Add several MBUS compatibles dt-bindings: arm: sunxi: Default to the full MBUS binding dt-bindings: usb: generic-ohci: Add Allwinner D1 compatible dt-bindings: usb: generic-ehci: Add Allwinner D1 compatible dt-bindings: usb: sunxi-musb: Add Allwinner D1 compatible arm64: dts: allwinner: a100: Update I2C controller fallback dt-bindings: i2c: mv64xxx: Add variants with offload support ARM: dts: sun8i-r40: Add thermal trip points/cooling maps ARM: dts: sun8i-r40: add opp table for cpu ARM: dts: sun8i-r40: Add "cpu-supply" node for sun8i-r40 based board arm64: dts: allwinner: a64: orangepi-win: Fix LED node name dt-bindings: clock: Add compatible for D1 DE2 clocks ARM: dts: allwinner: align gpio-key node names with dtschema arm64: dts: allwinner: align gpio-key node names with dtschema arm64: dts: allwinner: Use constants for RTC clock indexes ARM: dts: sunxi: Use constants for RTC clock indexes ARM: dts: sun5i: adjust whitespace around '=' Link: https://lore.kernel.org/r/Ysh8qRH0Q5Xv9Qhf@kista.localdomain Signed-off-by: Arnd Bergmann

dt-bindings: usb: generic-ohci: Add Allwinner D1 compatible

2022-07-05T19:53:26Z

The Allwinner D1 contains USB controllers which claim to be compatible with the OHCI specification version 1.0a. Signed-off-by: Samuel Holland Acked-by: Jernej Skrabec Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220702195249.54160-4-samuel@sholland.org

dt-bindings: usb: ohci: Increase the number of PHYs

2022-06-21T14:26:43Z

"make dtbs_check": arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee080000: phys: [[17, 0], [31]] is too long From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee0c0000: phys: [[17, 1], [33], [21, 0]] is too long From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml Some USB OHCI controllers (e.g. on the Renesas RZ/G1C SoC) have multiple PHYs. Increase the maximum number of PHYs to 3, which is sufficient for now. Fixes: 0499220d6dadafa5 ("dt-bindings: Add missing array size constraints") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/0112f9c8881513cb33bf7b66bc743dd08b35a2f5.1655301203.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: generic-ohci: Add HPE GXP ohci binding

2022-04-26T11:56:45Z

Add hpe,gxp-ohci to the generic-ohci list. This is to enable the device tree support. Signed-off-by: Nick Hawkins Link: https://lore.kernel.org/r/20220421192132.109954-10-nick.hawkins@hpe.com Acked-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: ohci: Add Allwinner A83t compatible

2021-07-27T14:00:21Z

The A83t OHCI compatible was introduced in device trees, but it was never documented. Signed-off-by: Maxime Ripard Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210721140424.725744-38-maxime@cerno.tech Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: generic-ohci: Document dr_mode property

2021-07-21T08:09:21Z

Document the optional property dr_mode present on both RZ/G2 and R-Car Gen3 SoCs. It fixes the dtbs_check warning, 'dr_mode' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Acked-by: Rob Herring Link: https://lore.kernel.org/r/20210630073013.22415-2-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2021-02-22T18:05:12Z

Pull devicetree updates from Rob Herring: - Sync dtc to upstream version v1.6.0-51-g183df9e9c2b9 and build host fdtoverlay - Add kbuild support to build DT overlays (%.dtbo) - Drop NULLifying match table in of_match_device(). In preparation for this, there are several driver cleanups to use (of_)?device_get_match_data(). - Drop pointless wrappers from DT struct device API - Convert USB binding schemas to use graph schema and remove old plain text graph binding doc - Convert spi-nor and v3d GPU bindings to DT schema - Tree wide schema fixes for if/then schemas, array size constraints, and undocumented compatible strings in examples - Handle 'no-map' correctly for already reserved memblock regions * tag 'devicetree-for-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (35 commits) driver core: platform: Drop of_device_node_put() wrapper of: Remove of_dev_{get,put}() dt-bindings: usb: Change descibe to describe in usbmisc-imx.txt dt-bindings: can: rcar_canfd: Group tuples in pin control properties dt-bindings: power: renesas,apmu: Group tuples in cpus properties dt-bindings: mtd: spi-nor: Convert to DT schema format dt-bindings: Use portable sort for version cmp dt-bindings: ethernet-controller: fix fixed-link specification dt-bindings: irqchip: Add node name to PRUSS INTC dt-bindings: interconnect: Fix the expected number of cells dt-bindings: Fix errors in 'if' schemas dt-bindings: iommu: renesas,ipmmu-vmsa: Make 'power-domains' conditionally required dt-bindings: Fix undocumented compatible strings in examples kbuild: Add support to build overlays (%.dtbo) scripts: dtc: Remove the unused fdtdump.c file scripts: dtc: Build fdtoverlay tool scripts/dtc: Update to upstream version v1.6.0-51-g183df9e9c2b9 scripts: dtc: Fetch fdtoverlay.c from external DTC project dt-bindings: thermal: sun8i: Fix misplaced schema keyword in compatible strings dt-bindings: iio: dac: Fix AD5686 references ...

dt-bindings: usb: generic-ohci: Add missing compatible strings

2021-02-03T23:49:50Z

The generic OHCI binding needs to document all the specific compatible strings so we can track undocumented compatible strings. Add all the compatible strings from in tree users. Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Acked-by: Greg Kroah-Hartman Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20210202175439.3904060-2-robh@kernel.org Signed-off-by: Greg Kroah-Hartman