kernel/Documentation/devicetree/bindings/usb/generic-ehci.yaml, branch linux-6.2.y

dt-bindings: usb: Add H616 compatible string

2022-11-07T19:06:35Z

The Allwinner H616 contains four fully OHCI/EHCI compatible USB host controllers, so just add their compatible strings to the list of generic OHCI/EHCI controllers. Signed-off-by: Andre Przywara Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20221031111358.3387297-2-andre.przywara@arm.com Signed-off-by: Jernej Skrabec

dt-bindings: Remove 'Device Tree Bindings' from end of title:

2022-08-25T19:06:57Z

As indicated in link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/ DT schema files should not have 'Device Tree Binding' as part of there title: line. Remove this in most .yaml files, so hopefully preventing developers copying it into new .yaml files, and being asked to remove it. Signed-off-by: Andrew Lunn Link: https://lore.kernel.org/r/20220825020427.3460650-1-andrew@lunn.ch Signed-off-by: Rob Herring

Merge tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

2022-08-04T18:41:28Z

Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of Thunderbolt and USB changes for 6.0-rc1. Lots of little things here, nothing major, just constant development on some new hardware support and cleanups of older drivers. Highlights are: - lots of typec changes and improvements for new hardware - new gadget controller driver - thunderbolt support for new hardware - the normal set of new usb-serial device ids and cleanups - loads of dwc3 controller fixes and improvements - mtu3 driver updates - testusb fixes for longtime issues (not many people use this tool it seems.) - minor driver fixes and improvements over the USB tree - chromeos platform driver changes were added and then reverted as they depened on some typec changes, but the cross-tree merges caused problems so they will come back later through the platform tree. All of these have been in linux-next for a while now with no reported issues" * tag 'usb-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (193 commits) usb: misc: onboard_usb_hub: Remove duplicated power_on delay usb: misc: onboard_usb_hub: Add TI USB8041 hub support usb: misc: onboard_usb_hub: Add reset-gpio support USB: usbsevseg: convert sysfs snprintf to sysfs_emit dt-bindings: usb: Add binding for TI USB8041 hub controller ARM: multi_v7_defconfig: enable USB onboard HUB driver ARM: dts: stm32: add support for USB2514B onboard hub on stm32mp15xx-dkx usb: misc: onboard-hub: add support for Microchip USB2514B USB 2.0 hub dt-bindings: usb: generic-ehci: allow usb-hcd schema properties usb: typec: ucsi: stm32g0: add bootloader support usb: typec: ucsi: stm32g0: add support for stm32g0 controller dt-bindings: usb: typec: add bindings for stm32g0 controller usb: typec: ucsi: Acknowledge the GET_ERROR_STATUS command completion usb: cdns3: change place of 'priv_ep' assignment in cdns3_gadget_ep_dequeue(), cdns3_gadget_ep_enable() usb/chipidea: fix repeated words in comments usb: renesas-xhci: Do not print any log while fw verif success usb: typec: retimer: Add missing id check in match callback USB: xhci: Fix comment typo usb/typec/tcpm: fix repeated words in comments usb/musb: fix repeated words in comments ...

dt-bindings: usb: generic-ehci: allow usb-hcd schema properties

2022-07-27T12:39:51Z

Allow properties and usb-device child nodes as defined in usb-hcd.yaml, by using unevaluatedProperties: false. By the way, remove the "companion" property as it's redundant with usb-hcd.yaml. As example, this allows an onboard hub, to be described in generic-ehci controller node: usb { compatible = "generic-ehci"; #address-cells = <1>; #size-cells = <0>; /* onboard HUB */ hub@1 { compatible = "usb424,2514"; reg = <1>; vdd-supply = <&v3v3>; }; }; Without this, dtbs_check complains on '#address-cells', '#size-cells', 'hub@1' do not match any of the regexes: 'pinctrl-[0-9]+' From schema: ..../generic-ehci.yaml Reviewed-by: Rob Herring Signed-off-by: Fabrice Gasnier Link: https://lore.kernel.org/r/20220726080708.162547-2-fabrice.gasnier@foss.st.com Signed-off-by: Greg Kroah-Hartman

Merge tag 'sunxi-dt-for-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

2022-07-11T15:32:03Z

- whitespace fixes - replaced RTC indexes with constants - gpio-key nodes aligned with dtschema - fixed LED node for Orange Pi Win - added OPP table for R40 CPU and thermal points - updated I2C controller compatibles - added compatibles for MBUS, D1 DE2 clocks, D1 USB - enable internal HMIC bias on Pinephone * tag 'sunxi-dt-for-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: pinephone: Enable internal HMIC bias dt-bindings: arm: sunxi: Add several MBUS compatibles dt-bindings: arm: sunxi: Default to the full MBUS binding dt-bindings: usb: generic-ohci: Add Allwinner D1 compatible dt-bindings: usb: generic-ehci: Add Allwinner D1 compatible dt-bindings: usb: sunxi-musb: Add Allwinner D1 compatible arm64: dts: allwinner: a100: Update I2C controller fallback dt-bindings: i2c: mv64xxx: Add variants with offload support ARM: dts: sun8i-r40: Add thermal trip points/cooling maps ARM: dts: sun8i-r40: add opp table for cpu ARM: dts: sun8i-r40: Add "cpu-supply" node for sun8i-r40 based board arm64: dts: allwinner: a64: orangepi-win: Fix LED node name dt-bindings: clock: Add compatible for D1 DE2 clocks ARM: dts: allwinner: align gpio-key node names with dtschema arm64: dts: allwinner: align gpio-key node names with dtschema arm64: dts: allwinner: Use constants for RTC clock indexes ARM: dts: sunxi: Use constants for RTC clock indexes ARM: dts: sun5i: adjust whitespace around '=' Link: https://lore.kernel.org/r/Ysh8qRH0Q5Xv9Qhf@kista.localdomain Signed-off-by: Arnd Bergmann

dt-bindings: usb: generic-ehci: Add Allwinner D1 compatible

2022-07-05T19:53:26Z

The Allwinner D1 contains USB controllers which claim to be compatible with the EHCI specification version 1.0. Signed-off-by: Samuel Holland Acked-by: Jernej Skrabec Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220702195249.54160-3-samuel@sholland.org

dt-bindings: usb: ehci: Increase the number of PHYs

2022-06-21T14:26:54Z

"make dtbs_check": arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee080100: phys: [[17, 0], [31]] is too long From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee0c0100: phys: [[17, 1], [33], [21, 0]] is too long From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml Some USB EHCI controllers (e.g. on the Renesas RZ/G1C SoC) have multiple PHYs. Increase the maximum number of PHYs to 3, which is sufficient for now. Fixes: 0499220d6dadafa5 ("dt-bindings: Add missing array size constraints") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/c5d19e2f9714f43effd90208798fc1936098078f.1655301043.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: generic-ehci: Add HPE GXP ehci binding

2022-04-26T11:56:19Z

Add hpe,gxp-ehci to the generic-ehci list. This is to enable the device tree. Signed-off-by: Nick Hawkins Link: https://lore.kernel.org/r/20220421192132.109954-9-nick.hawkins@hpe.com Acked-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: ehci: Add Allwinner A83t compatible

2021-07-27T14:00:05Z

The A83t EHCI compatible was introduced in device trees, but it was never documented. Signed-off-by: Maxime Ripard Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20210721140424.725744-37-maxime@cerno.tech Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: generic-ehci: Document dr_mode property

2021-07-21T08:08:45Z

Document the optional property dr_mode present on both RZ/G2 and R-Car Gen3 SoCs. It fixes dtbs_check warning, 'dr_mode' does not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Biju Das Reviewed-by: Lad Prabhakar Acked-by: Rob Herring Link: https://lore.kernel.org/r/20210630073013.22415-3-biju.das.jz@bp.renesas.com Signed-off-by: Greg Kroah-Hartman