kernel/Documentation/devicetree/bindings/usb/cdns,usb3.yaml, branch linux-6.2.y

dt-bindings: drop redundant part of title (end, part three)

2022-12-16T17:41:49Z

The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: $.*$ [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski Acked-by: Alexandre Belloni Acked-by: Matti Vaittinen # ROHM Acked-by: Ulf Hansson # MMC Acked-by: Stephen Boyd # clk Acked-by: Dmitry Torokhov # input Acked-by: Mark Brown Acked-by: Hans Verkuil # media Acked-by: Sebastian Reichel # power Acked-by: Viresh Kumar # cpufreq Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring

doc: dt-binding: cdns,usb3: Add interrupt-names property under required

2021-06-04T11:51:41Z

In the driver the interrupts are fetched by name. Therefore, add interrupt names in the list of required properties Fixes: 68989fe1c39d ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema") Signed-off-by: Aswath Govindraju Link: https://lore.kernel.org/r/20210528060657.29100-1-a-govindraju@ti.com Signed-off-by: Greg Kroah-Hartman

dt-bindings: usb: cdns,usb3: Fix interrupts order

2021-06-03T11:54:17Z

Correct the order of the descriptions for the "interrupts" property to match the order of the "interrupt-names" property. Fixes: 68989fe1c39d9b32 ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema") Acked-by: Peter Chen Acked-by: Peter Chen Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20210527193952.1705127-1-geert@linux-m68k.org Signed-off-by: Greg Kroah-Hartman

doc: dt-binding: cdns,usb3: add wakeup-irq

2020-12-10T00:45:26Z

To support low power mode for controller, the driver needs wakeup-irq to reflect the signal changing after controller is stopped, and waking the controller up accordingly. Reviewed-by: Rob Herring Signed-off-by: Peter Chen

dt-bindings: More whitespace clean-ups in schema files

2020-10-26T21:13:56Z

Clean-up incorrect indentation, extra spaces, and missing EOF newline in schema files. Most of the clean-ups are for list indentation which should always be 2 spaces more than the preceding keyword. Found with yamllint (now integrated into the checks). Cc: linux-arm-kernel@lists.infradead.org Cc: dri-devel@lists.freedesktop.org Cc: linux-gpio@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-iio@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: linux-mmc@vger.kernel.org Cc: linux-mtd@lists.infradead.org Cc: linux-serial@vger.kernel.org Cc: linux-usb@vger.kernel.org Acked-by: Wolfram Sang # for I2C Acked-by: Sam Ravnborg # for display Acked-by: Jonathan Cameron #for-iio Signed-off-by: Rob Herring

dt-bindings: usb: cdns,usb3: Add cdns,phyrst-a-enable property

2020-10-02T06:57:39Z

Controller version 0x0002450D has USB2 PHY RX sensitivity issues that needs to be worked around by enabling phyrst-a-enable bit in PHYRST_CFG register. There is no way to know controller version before device controller is started and the workaround needs to be applied for both host and device modes, so we add this DT property. Signed-off-by: Roger Quadros Acked-by: Rob Herring Signed-off-by: Felipe Balbi

dt-bindings: usb: Convert cdns-usb3.txt to YAML schema

2020-10-02T06:57:39Z

Converts cdns-usb3.txt to YAML schema cdns,usb3.yaml Reviewed-by: Rob Herring Signed-off-by: Roger Quadros Signed-off-by: Felipe Balbi