kernel/Documentation/devicetree/bindings/net/pse-pd/pse-controller.yaml, branch linux-rolling-stableHosts the 0x221E linux distro kernel.https://universe.0xinfinity.dev/distro/kernel/atom?h=linux-rolling-stable2025-01-09T03:34:56Zdt-bindings: net: pse-pd: Fix unusual character in documentation2025-01-09T03:34:56ZKory Maincentkory.maincent@bootlin.com2025-01-07T14:26:59Zurn:sha1:d1bf27c4e1768d4733143f26962a5c68ea8bd03c
The documentation contained an unusual character due to an issue in my
personal b4 setup. Fix the problem by providing the correct PSE Pinout
Alternatives table number description.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250107142659.425877-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dt-bindings: net: pse-pd: Add another way of describing several PSE PIs2024-04-19T01:27:39ZKory Maincent (Dent Project)kory.maincent@bootlin.com2024-04-17T14:39:56Zurn:sha1:b17181a88fb90d7eab51ab7576e8985cc2a8d1bc
PSE PI setup may encompass multiple PSE controllers or auxiliary circuits
that collectively manage power delivery to one Ethernet port.
Such configurations might support a range of PoE standards and require
the capability to dynamically configure power delivery based on the
operational mode (e.g., PoE2 versus PoE4) or specific requirements of
connected devices. In these instances, a dedicated PSE PI node becomes
essential for accurately documenting the system architecture. This node
would serve to detail the interactions between different PSE controllers,
the support for various PoE modes, and any additional logic required to
coordinate power delivery across the network infrastructure.
The old usage of "#pse-cells" is unsuficient as it carries only the PSE PI
index information.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240417-feature_poe-v9-8-242293fd1900@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dt-bindings: net: pse-pd: Allow -N suffix for ethernet-pse node names2023-06-02T04:38:28ZOleksij Rempelo.rempel@pengutronix.de2023-05-31T10:21:12Zurn:sha1:bd415f6c748ec3ca0017f9a6f23a5c02900eb6d2
Extend the pattern matching for PSE-PD controller nodes to allow -N
suffixes. This enables the use of multiple "ethernet-pse" nodes without the
need for a "reg" property.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller2022-10-04T00:33:57ZOleksij Rempelo.rempel@pengutronix.de2022-10-03T06:52:01Zurn:sha1:f05dfdaf567aaa482e6e4474bbf5993c5ffffc49
Add bindings for the regulator based Ethernet PoDL PSE controller and
generic bindings for all PSE controllers.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>