kernel/Documentation/devicetree/bindings/leds/backlight, branch linux-5.1.y

dt-bindings: pwm-backlight: Move brightness-levels to optional

2018-07-04T09:31:18Z

The patch 'backlight: pwm_bl: compute brightness of LED linearly to human eye' introduced a default brightness-levels table that is used when brightness-levels is not available in the dts. So move brightness-levels and default-brightness-level to be optional. Signed-off-by: Enric Balletbo i Serra Reviewed-by: Rob Herring Acked-by: Daniel Thompson Signed-off-by: Lee Jones

dt-bindings: pwm-backlight: Add a num-interpolation-steps property

2018-07-04T09:31:18Z

The num-interpolated-steps property specifies the number of interpolated steps between each value of brightness-level table. This is useful for high resolution PWMs to not have to list out every possible value in the brightness-level array. Signed-off-by: Enric Balletbo i Serra Acked-by: Daniel Thompson Reviewed-by: Rob Herring Signed-off-by: Lee Jones

dt-bindings: pwm-backlight: Add PWM delay proprieties.

2018-04-30T09:50:43Z

Hardware needs a delay between setting an initial (non-zero) PWM and enabling the backlight using GPIO. The post-pwm-on-delay-ms specifies this delay in milli seconds. Hardware also needs a delay between disabing the backlight using GPIO and setting PWM value to 0. The pwm-off-delay-ms is this delay in milli seconds. Signed-off-by: Enric Balletbo i Serra Acked-by: Pavel Machek Acked-by: Thierry Reding Acked-by: Daniel Thompson Reviewed-by: Rob Herring Signed-off-by: Lee Jones

dt-bindings: backlight: Add binding for RAVE SP backlight driver

2018-04-30T09:50:43Z

Add Device Tree bindings for RAVE SP backlight driver - an MFD cell of parent RAVE SP driver (documented in Documentation/devicetree/bindings/mfd/zii,rave-sp.txt). Signed-off-by: Andrey Smirnov Acked-by: Daniel Thompson Reviewed-by: Rob Herring Signed-off-by: Lee Jones

dt-bindings: backlight: arcxcnn: Supply bindings for Arctic Sand backlight

2017-04-25T08:21:04Z

Signed-off-by: Olimpiu Dejeu Acked-by: Rob Herring Acked-by: Daniel Thompson Signed-off-by: Lee Jones

backlight: lp855x: Add enable regulator

2016-06-29T09:06:21Z

The LP8556 datasheet describes an EN/VDDIO input, which serves "both as a chip enable and as a power supply reference for PWM, SDA, and SCL inputs." The LP8556 that I'm testing doesn't respond properly if I try to talk I2C to it too quickly after enabling VDDIO, and the LP8555 datasheet mentions a t_RESPONSE delay of up to 1 millisecond. Support this EN/VDDIO by adding a regulator property to the binding; enabling this regulator at probe time; and sleeping for 1 to 2ms, if the EN/VDDIO regulator was provided. Signed-off-by: Brian Norris Acked-by: Rob Herring Acked-by: Milo Kim Reviewed-by: Stephen Barber Signed-off-by: Lee Jones

Merge tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2015-11-06T20:17:09Z

Pull DeviceTree updates from Rob Herring: "A fairly large (by DT standards) pull request this time with the majority being some overdue moving DT binding docs around to consolidate similar bindings. - DT binding doc consolidation moving similar bindings to common locations. The majority of these are display related which were scattered in video/, fb/, drm/, gpu/, and panel/ directories. - Add new config option, CONFIG_OF_ALL_DTBS, to enable building all dtbs in the tree for most arches with dts files (except powerpc for now). - OF_IRQ=n fixes for user enabled CONFIG_OF. - of_node_put ref counting fixes from Julia Lawall. - Common DT binding for wakeup-source and deprecation of all similar bindings. - DT binding for PXA LCD controller. - Allow ignoring failed PCI resource translations in order to ignore 64-bit addresses on non-LPAE 32-bit kernels. - Support setting the NUMA node from DT instead of only from parent device. - Couple of earlycon DT parsing fixes for address and options" * tag 'devicetree-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (45 commits) MAINTAINERS: update DT binding doc locations devicetree: add Sigma Designs vendor prefix of: simplify arch_find_n_match_cpu_physical_id() function Documentation: arm: Fixed typo in socfpga fpga mgr example Documentation: devicetree: fix reference to legacy wakeup properties Documentation: devicetree: standardize/consolidate on "wakeup-source" property drivers: of: removing assignment of 0 to static variable xtensa: enable building of all dtbs mips: enable building of all dtbs metag: enable building of all dtbs metag: use common make variables for dtb builds h8300: enable building of all dtbs arm64: enable building of all dtbs arm: enable building of all dtbs arc: enable building of all dtbs arc: use common make variables for dtb builds of: add config option to enable building of all dtbs of/fdt: fix error checking for earlycon address of/overlay: add missing of_node_put of/platform: add missing of_node_put ...

dt-bindings: move backlight bindings under leds

2015-10-22T14:21:22Z

Backlights are generally a subtype of LEDs at least from a software point of view if not always electrically. Move the bindings from the video directory to underneath the leds dir. Signed-off-by: Rob Herring Cc: Pawel Moll Cc: Mark Rutland Cc: Ian Campbell Cc: Kumar Gala