kernel/Documentation/devicetree/bindings/display/bridge, branch linux-5.1.y

Merge tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm

2019-03-08T16:23:15Z

Pull drm updates from Dave Airlie: "This is the main drm pull request for the 5.1 merge window. The big changes I'd highlight are: - nouveau has HMM support now, there is finally an in-tree user so we can quieten down the rip it out people. - i915 now enables fastboot by default on Skylake+ - Displayport Multistream support has been refactored and should hopefully be more reliable. Core: - header cleanups aiming towards removing drmP.h - dma-buf fence seqnos to 64-bits - common helper for DP mst hotplug for radeon,i915,amdgpu + new refcounting scheme - MST i2c improvements - drm_syncobj_cb removal - ARM FB compression fourcc - P010 + P016 fourcc - allwinner tiled format modifier - i2c over aux I2C_M_STOP support - DRM_AUTH handling fixes TTM: - ref/unref renaming New driver: - ARM komeda display driver scheduler: - refactor mirror list handling - rework hw fence processing - 0 run queue entity fix bridge: - TI DS90C185 LVDS bridge - thc631lvdm83d bridge improvements - cadence + allwinner DSI ported to generic phy panels: - Sitronix ST7701 panel - Kingdisplay KD097D04 - LeMaker BL035-RGB-002 - PDA 91-00156-A0 - Innolux EE101IA-01D i915: - Enable fastboot by default on SKL+/VLV/CHV - Export RPCS configuration for ICL media driver - Coffelake PCI ID - CNL clocks setup fixes - ACPI/PMIC support for MIPI/DSI - Per-engine WA init for all engines - Shrinker locking fixes - Kerneldoc updates - Lots of ring improvements and reset fixes - Coffeelake GVT Support - VFIO GVT EDID Region support - runtime PM wakeref tracking - ILK->IVB primary plane enable delays - userptr mutex locking fixes - DSI fixes - LVDS/TV cleanups - HW readout fixes - LUT robustness fixes - ICL display and watermark fixes - gem mmap race fix amdgpu: - add scheduled dependencies interface - DCC on scanout surfaces - vega10/20 BACO support - Multiple IH rings on soc15 - XGMI locking fixes - DC i2c/aux cleanups - runtime SMU debug interface - Kexec improvmeents - SR-IOV fixes - DC freesync + ABM fixes - GDS fixes - GPUVM fixes - vega20 PCIE DPM switching fixes - Context priority handling fixes radeon: - fix missing break in evergreen parser nouveau: - SVM support via HMM msm: - QCOM Compressed modifier support exynos: - s5pv210 rotator support imx: - zpos property support - pending update fixes v3d: - cache flush improvments vc4: - reflection support - HDMI overscan support tegra: - CEC refactoring - HDMI audio fixes - Tegra186 prep work - SOR crossbar device tree fixes sun4i: - implicit fencing support - YUV and scalar support improvements - A23 support - tiling fixes atmel-hlcdc: - clipping and rotation property fixes qxl: - BO and PRIME improvements - generic fbdev emulation dw-hdmi: - HDMI 2.0 2160p - YUV420 ouput rockchip: - implicit fencing support - reflection proerties virtio-gpu: - use generic fbdev emulation tilcdc: - cpufreq vs crtc init fix rcar-du: - R8A774C0 support - D3/E3 RGB output routing fixes and DPAD0 support - RA87744 LVDS support bochs: - atomic and generic fbdev emulation - ID mismatch error on bochs load meson: - remove firmware fbs" * tag 'drm-next-2019-03-06' of git://anongit.freedesktop.org/drm/drm: (1130 commits) drm/amd/display: Use vrr friendly pageflip throttling in DC. drm/imx: only send commit done event when all state has been applied drm/imx: allow building under COMPILE_TEST drm/imx: imx-tve: depend on COMMON_CLK drm/imx: ipuv3-plane: add zpos property drm/imx: ipuv3-plane: add function to query atomic update status gpu: ipu-v3: prg: add function to get channel configure status gpu: ipu-v3: pre: add double buffer status readback drm/amdgpu: Bump amdgpu version for context priority override. drm/amdgpu/powerplay: fix typo in BACO header guards drm/amdgpu/powerplay: fix return codes in BACO code drm/amdgpu: add missing license on baco files drm/bochs: Fix the ID mismatch error drm/nouveau/dmem: use dma addresses during migration copies drm/nouveau/dmem: use physical vram addresses during migration copies drm/nouveau/dmem: extend copy function to allow direct use of physical addresses drm/nouveau/svm: new ioctl to migrate process memory to GPU memory drm/nouveau/dmem: device memory helpers for SVM drm/nouveau/svm: initial support for shared virtual memory drm/nouveau: prepare for enabling svm with existing userspace interfaces ...

dt-bindings: display: renesas: lvds: Document r8a7744 bindings

2019-02-08T00:25:55Z

Document the RZ/G1N (R8A7744) LVDS bindings. Signed-off-by: Biju Das Reviewed-by: Laurent Pinchart Signed-off-by: Laurent Pinchart Reviewed-by: Simon Horman Reviewed-by: Rob Herring

dt-bindings: phy: Move the Cadence D-PHY bindings

2019-02-07T05:41:06Z

The Cadence D-PHY bindings was defined as part of the DSI block so far. However, since it's now going to be a separate driver, we need to move the binding to a file of its own. Acked-by: Sakari Ailus Signed-off-by: Maxime Ripard Signed-off-by: Kishon Vijay Abraham I

Merge tag 'drm-misc-next-2019-01-23' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

2019-01-24T10:02:12Z

drm-misc-next for 5.1: UAPI Changes: - Addition of the Allwinner tiled format modifier Cross-subsystem Changes: Core Changes: - dma-buf documentation improvements - Removal of now unused fbdev helpers - Addition of new drm fbdev helpers - Improvements to tinydrm - Addition of new drm_fourcc helpers - Impromevents to i2c-over-aux to handle I2C_M_STOP Driver Changes: - Add support for the TI DS90C185 LVDS bridge - Improvements to the thc63lvdm83d bridge - Improvements to sun4i YUV and scaler support - Fix to the powerdown sequence of panel-innolux Signed-off-by: Dave Airlie From: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20190123110317.h4tovujaydo2bfz2@flea

dt-bindings: display: bridge: thc63lvdm83d: use standard powerdown-gpios

2019-01-18T08:18:33Z

The name powerdown-gpios is the standard property name for the functionality covered by the previous pwdn-gpios name. This rename should be safe to do since the linux driver supporting the binding (lvds-encoder.c) never implemented the property, and no dts file names it. At least not upstream. Reviewed-by: Rob Herring Signed-off-by: Peter Rosin Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190111151843.11114-4-peda@axentia.se

dt-bindings: display: bridge: lvds-transmitter: cleanup example

2019-01-18T08:18:33Z

Drop #address-cells and #size-cells from the root node in the example, they are unused. Reviewed-by: Rob Herring Signed-off-by: Peter Rosin Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190111151843.11114-3-peda@axentia.se

dt-bindings: display: bridge: fork out ti, ds90c185 from lvds-transmitter

2019-01-18T08:18:32Z

DS90C185 has a shutdown pin which does not fit in the lvds-transmitter binding, which is meant to be generic. The sister chip DS90C187 is similar to DS90C185, describe it here as well. Signed-off-by: Peter Rosin Reviewed-by: Rob Herring Signed-off-by: Andrzej Hajda Link: https://patchwork.freedesktop.org/patch/msgid/20190111151843.11114-2-peda@axentia.se

dt-bindings: display: renesas: lvds: Document r8a774c0 bindings

2019-01-14T01:51:19Z

The RZ/G2E (r8a774c0) supports two LVDS channels. Extend the binding to support them. Signed-off-by: Fabrizio Castro Reviewed-by: Laurent Pinchart Signed-off-by: Laurent Pinchart Reviewed-by: Simon Horman

dt-bindings: display: renesas: lvds: Document r8a77965 bindings

2018-11-23T11:51:22Z

The M3-N (r8a77965) includes one LVDS encoder. Extend the binding to support it. Signed-off-by: Laurent Pinchart Reviewed-by: Kieran Bingham

dt-bindings: display: renesas: lvds: Add EXTAL and DU_DOTCLKIN clocks

2018-09-24T21:39:46Z

On the D3 and E3 SoCs, the LVDS encoder can derive its internal pixel clock from an externally supplied clock, either through the EXTAL pin or through one of the DU_DOTCLKINx pins. Add corresponding clocks to the DT bindings. To retain backward compatibility with DT that don't specify the clock-names property, the functional clock must always be specified first, and the clock-names property is optional when only the functional clock is specified. Signed-off-by: Laurent Pinchart Reviewed-by: Jacopo Mondi Reviewed-by: Ulrich Hecht Reviewed-by: Kieran Bingham