kernel/Documentation/devicetree/bindings/arm/stm32, branch linux-6.2.y

dt-bindings: drop redundant part of title (end, part three)

2022-12-16T17:41:49Z

The Devicetree bindings document does not have to say in the title that it is a "binding", but instead just describe the hardware. Drop trailing "bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: $.*$ [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski Acked-by: Alexandre Belloni Acked-by: Matti Vaittinen # ROHM Acked-by: Ulf Hansson # MMC Acked-by: Stephen Boyd # clk Acked-by: Dmitry Torokhov # input Acked-by: Mark Brown Acked-by: Hans Verkuil # media Acked-by: Sebastian Reichel # power Acked-by: Viresh Kumar # cpufreq Link: https://lore.kernel.org/r/20221216163815.522628-7-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring

dt-bindings: drop redundant part of title (end)

2022-12-16T17:41:49Z

The Devicetree bindings document does not have to say in the title that it is a "Devicetree binding", but instead just describe the hardware. Drop trailing "Devicetree bindings" in various forms (also with trailing full stop): find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: $.*$ [dD]evice[ -]\?[tT]ree [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: $.*$ [dD]evice[ -]\?[nN]ode [bB]indings\?\.\?$/title: \1/' {} \; find Documentation/devicetree/bindings/ -type f -name '*.yaml' \ -not -name 'trivial-devices.yaml' \ -exec sed -i -e 's/^title: $.*$ [dD][tT] [bB]indings\?\.\?$/title: \1/' {} \; Signed-off-by: Krzysztof Kozlowski Acked-by: Alexandre Belloni Acked-by: Jonathan Cameron # IIO Reviewed-by: Jonathan Cameron Acked-by: Ulf Hansson # MMC Acked-by: Stephen Boyd # clk Acked-by: Dmitry Torokhov # input Acked-by: Mark Brown Acked-by: Hans Verkuil # media Acked-by: Sebastian Reichel # power Link: https://lore.kernel.org/r/20221216163815.522628-5-krzysztof.kozlowski@linaro.org Signed-off-by: Rob Herring

dt-bindings: arm: stm32: Add compatible string for DH electronics DHCOR Testbench board

2022-10-21T09:17:25Z

Add DT compatible string for DHCOR Testbench board, which is a testbench for testing of DHCOR SoM during manufacturing. This is effectively a trimmed down version of AV96 board with CSI-2 bridge, HDMI bridge, WiFi, Audio and LEDs removed and used as GPIOs instead. Signed-off-by: Marek Vasut Acked-by: Rob Herring Signed-off-by: Alexandre Torgue

dt-bindings: arm: stm32: Add compatible string for DH electronics DHCOR DRC Compact

2022-07-05T09:42:11Z

Add DT compatible string for DH electronics STM32MP15xx DHCOR on DRC Compact carrier board into YAML DT binding document. This system is a general purpose DIN Rail Controller design. Signed-off-by: Marek Vasut Cc: Alexandre Torgue Cc: Maxime Coquelin Cc: Patrice Chotard Cc: Patrick Delaunay Cc: Rob Herring Cc: devicetree@vger.kernel.org Cc: linux-stm32@st-md-mailman.stormreply.com To: linux-arm-kernel@lists.infradead.org Reviewed-by: Rob Herring Signed-off-by: Alexandre Torgue

dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)

2022-05-04T09:01:03Z

Add a "secure" version based on SCMI of STM32 boards. Only boards provided by STMicroelectronics are concerned: -STM32MP157A-DK1 -STM32MP157C-DK2 -STM32MP157C-ED1 -STM32MP157C-EV1 Signed-off-by: Alexandre Torgue Acked-by: Rob Herring

dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards

2022-05-02T08:34:20Z

This boards are based on STM32MP151AAD3 and use 10BaseT1L for communication. - PRTT1C - 10BaseT1L switch - PRTT1S - 10BaseT1L CO2 sensor board - PRTT1A - 10BaseT1L multi functional controller Signed-off-by: Oleksij Rempel Acked-by: Krzysztof Kozlowski Signed-off-by: Alexandre Torgue

dt-bindings: arm: stm32: correct blank lines

2022-05-02T07:55:26Z

Correct blank lines to precesily separate entries. Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Signed-off-by: Alexandre Torgue

dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards

2022-05-02T07:55:11Z

The bindings for DH STM32MP1 SoM boards allows invalid combinations, e.g. st,stm32mp153 SoC on a dh,stm32mp157c-dhcom-som SoM. Split the enums to properly match valid setups. Signed-off-by: Krzysztof Kozlowski Acked-by: Rob Herring Signed-off-by: Alexandre Torgue

dt-binding: arm/stm32: Add emtrion hardware emSBC-Argon

2022-02-07T09:31:04Z

This patch presents the yaml patch for the emtrion GmbH Argon board series. Signed-off-by: Reinhold Mueller Acked-by: Rob Herring Signed-off-by: Alexandre Torgue

dt-bindings: arm: stm32: Add Engicam i.Core STM32MP1 C.TOUCH 2.0 10.1" OF

2021-12-06T08:31:05Z

i.Core STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam. C.TOUCH 2.0 is a general purpose carrier board with capacitive touch interface support. 10.1" OF is a capacitive touch 10.1" Open Frame panel solutions. i.Core STM32MP1 needs to mount on top of C.TOUCH 2.0 carrier with pluged 10.1" OF for creating complete i.Core STM32MP1 C.TOUCH 2.0 10.1" Open Frame board. Add bindings for it. Signed-off-by: Jagan Teki Acked-by: Rob Herring Signed-off-by: Alexandre Torgue