kernel/Documentation/devicetree/bindings/arm/rockchip.yaml, branch linux-6.2.y

dt-bindings: arm: rockchip: Add SOQuartz Model A

2022-11-22T22:22:40Z

The SOQuartz Model A base board is a carrier board for the CM4 form factor, designed around the PINE64 SOQuartz CM4 SoM. The board sports "Model A" dimensions like the Quartz64 Model A, but is not to be confused with that. As for I/O, it features USB 2 ports, Gigabit Ethernet, a PCIe 2 x1 slot, HDMI, a 40-pin GPIO header, CSI/DSI connectors, an eDP flat-flex cable connector, a 12V DC barrel jack for power input and power/reset buttons as well as a microSD card slot. Signed-off-by: Nicolas Frattaroli Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20221116115337.541601-4-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner

dt-bindings: arm: rockchip: Add SOQuartz Blade

2022-11-22T22:22:39Z

Add a compatible for the SOQuartz Blade base board to the rockchip platforms binding. The SOQuartz Blade is a PoE-capable carrier board for the CM4 SoM form factor, designed around the SOQuartz CM4 System-on-Module. The board features the usual connectivity (GPIO, USB, HDMI, Ethernet) and an M.2 slot for SSDs. It may also be powered from a 5V barrel jack input, and has a 3.5mm jack for UART debug output. Signed-off-by: Nicolas Frattaroli Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20221116115337.541601-2-frattaroli.nicolas@gmail.com Signed-off-by: Heiko Stuebner

dt-bindings: arm: rockchip: Add more RK3326 devices

2022-11-22T22:20:05Z

This patch adds Anbernic RG351M, Odroid Go Advance Black Edition and Odroid Go Super into dt bindings. Signed-off-by: Maya Matuszczyk Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20221117215954.4114202-3-maccraft123mc@gmail.com Signed-off-by: Heiko Stuebner

dt-bindings: rockchip: Add Rockchip rk3566 box demo board

2022-11-15T10:50:03Z

Add device tree binding for Rockchip rk3566 box demo board. Signed-off-by: Andy Yan Acked-by: Rob Herring Link: https://lore.kernel.org/r/20221105095935.958144-1-andyshrk@163.com Signed-off-by: Heiko Stuebner

dt-bindings: arm: rockchip: Add Anbernic RG353V and RG353VS

2022-10-30T19:48:49Z

Add entry for the Anbernic RG353V and RG353VS handheld devices. Signed-off-by: Chris Morgan Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20221028184045.13113-2-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner

dt-bindings: rockchip: Add Hardkernel ODROID-M1 board

2022-10-17T11:44:38Z

Add device tree binding for Hardkernel ODROID-M1 board based on RK3568 SoC. Signed-off-by: Dongjin Kim Signed-off-by: Aurelien Jarno Acked-by: Krzysztof Kozlowski Tested-by: Dan Johansen Link: https://lore.kernel.org/r/20220930051246.391614-2-aurelien@aurel32.net Signed-off-by: Heiko Stuebner

dt-bindings: arm: rockchip: add Theobroma Systems PX30-µQ7 (Ringneck) with Haikou

2022-10-17T11:42:13Z

Add entry for the Theobroma Systems PX30-µQ7 (Ringneck) with Haikou devkit. Acked-by: Krzysztof Kozlowski Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20220930-upstream-ringneck-v2-2-6671694b6934@theobroma-systems.com Signed-off-by: Heiko Stuebner

Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2022-10-10T20:13:51Z

Pull devicetree updates from Rob Herring: "DT core: - Fix node refcounting in of_find_last_cache_level() - Constify device_node in of_device_compatible_match() - Fix 'dma-ranges' handling in bus controller nodes - Fix handling of initrd start > end - Improve error reporting in of_irq_init() - Taint kernel on DT unittest running - Use strscpy instead of strlcpy - Add a build target, dt_compatible_check, to check for compatible strings used in kernel sources against compatible strings in DT schemas. - Handle DT_SCHEMA_FILES changes when rebuilding DT bindings: - LED bindings for MT6370 PMIC - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller, mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc, and arm,versatile-sysreg to DT schema format - Add nvmem cells to u-boot,env schema - Add more LED_COLOR_ID definitions - Require 'opp-table' uses to be a node - Various schema fixes to match QEMU 'virt' DT usage - Tree wide dropping of redundant 'Device Tree Binding' in schema titles - More (unevaluated|additional)Properties fixes in schema child nodes - Drop various redundant minItems equal to maxItems" * tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits) of: base: Shift refcount decrement in of_find_last_cache_level() dt-bindings: leds: Add MediaTek MT6370 flashlight dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator dt-bindings: mailbox: Convert mtk-gce to DT schema of: base: make of_device_compatible_match() accept const device node of: Fix "dma-ranges" handling for bus controllers of: fdt: Remove unused struct fdt_scan_status dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node dt-bindings: timer: Add power-domains for TI timer-dm on K3 dt: Add a check for undocumented compatible strings in kernel kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML dt-bindings: i2c: migrate mt7621 text bindings to YAML dt-bindings: power: gpcv2: correct patternProperties dt-bindings: virtio: Convert virtio,pci-iommu to DT schema dt-bindings: timer: arm,arch_timer: Allow dual compatible string dt-bindings: arm: cpus: Add kryo240 compatible dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema dt-bindings: nvmem: u-boot,env: add basic NVMEM cells dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema ...

dt-bindings: Add doc for FriendlyARM NanoPi R4S Enterprise Edition

2022-09-16T10:51:38Z

Add devicetree binding documentation for the FriendlyARM NanoPi R4S Enterprise Edition. Signed-off-by: Tianling Shen Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20220915022511.4267-1-cnsztl@gmail.com Signed-off-by: Heiko Stuebner

dt-bindings: arm: rockchip: Add gru-scarlet sku{2,4} variants

2022-09-15T13:42:07Z

The Gru-Scarlet family includes a variety of SKU identifiers, using parts of a 3-bit space {0..7}. SKU2 and SKU4 devices (under a few different manufacturer names) also use the Innolux display. For reference, the original vendor tree source: CHROMIUM: arm64: dts: rockchip: add sku{0,2,4} compatibility https://chromium.googlesource.com/chromiumos/third_party/kernel/+/f6ed665c9e2eb37fb2680debbb36ec9fb0e8fb97 CHROMIUM: arm64: dts: rockchip: scarlet: add SKU0 device tree https://chromium.googlesource.com/chromiumos/third_party/kernel/+/9987c8776f4b087d135d761e59f7fa6cc83fc7fc Signed-off-by: Brian Norris Link: https://lore.kernel.org/r/20220817123350.1.Ibb15bab32dbfa0d89f86321c4eae7adbc8d7ad4a@changeid Signed-off-by: Heiko Stuebner