kernel/Documentation/devicetree/bindings/arm/omap/ctrl.txt, branch linux-rolling-stable

dt-bindings: pinctrl: Update pinctrl-single to use yaml

2023-08-07T13:32:22Z

Update binding for yaml and remove the old related txt bindings. Note that we are also adding the undocumented pinctrl-single,slew-rate property. And we only use the first example from the old binding. As we are mostly using a generic compatible across various SoCs, let's not start adding matches for random pin group node naming. Let's standardize on pin group node name ending in -pins with an optional instance number suffix. As a pin group may have additional pins added to it later on, let's always use -pins rather than -pin for the gropu name. Most of the dts files have been updated already for the pin group node names with a few changes still pending. Cc: Nishanth Menon Cc: Vignesh Raghavendra Signed-off-by: Tony Lindgren Reviewed-by: Rob Herring Link: https://lore.kernel.org/r/20230721082654.27036-1-tony@atomide.com Signed-off-by: Linus Walleij

dt-bindings: omap5: ctrl: Support for control module wkup pad config

2018-03-20T14:35:28Z

The pad configuration area under control module wkup has some miscellaneous config registers, that are not pinmux related. Add new compatible string for this section of control module. Signed-off-by: Tero Kristo Signed-off-by: Tony Lindgren

ARM: dts: Add missing properties for omap4 control modules

2017-09-19T17:21:45Z

On omap4, we are missing several ti,hwmods properties and IO ranges for system control modules. These are needed by the SoC interconnect code. Note that this will only show up as a bug with "doesn't have mpu register target base" boot errors when the legacy platform data is removed. In order to add these, we need to move omap4_pmx_wkup to be a child of omap4_padconf_wkup. On omap4 there are separate modules for control module and control module pads. For control module core, we have this already configured except for the missing ti,hwmods and reg entries. Cc: Mark Rutland Acked-by: Rob Herring Signed-off-by: Tony Lindgren

ARM: dts: dra7: add minimal l4 bus layout with control module support

2015-03-31T18:26:59Z

This patch creates the l4_cfg and l4_wkup interconnects for DRA7, and moves some of the generic peripherals under it. System control module support is added to the device tree also, and the existing SCM related functionality is moved under it. Signed-off-by: Tero Kristo

ARM: dts: omap5: add minimal l4 bus layout with control module support

2015-03-31T18:26:58Z

This patch creates the l4_cfg and l4_wkup interconnects for OMAP5, and moves some of the generic peripherals under it. System control module support is added to the device tree also, and the existing SCM related functionality is moved under it. Signed-off-by: Tero Kristo

ARM: dts: omap4: add minimal l4 bus layout with control module support

2015-03-31T18:26:56Z

This patch creates the l4_cfg and l4_wkup interconnects for OMAP4, and moves some of the generic peripherals under it. System control module support is added to the device tree also, and the existing SCM related functionality is moved under it. Signed-off-by: Tero Kristo Reported-by: Tony Lindgren