kernel/Documentation/devicetree/bindings/arm/fsl.txt, branch linux-4.3.y

ARM: vf610: enable Cortex-M4 configuration on Vybrid SoC

2015-05-20T21:10:14Z

This patch allows to build the Kernel for Vybrid (VF6xx) SoC when ARMv7-M CPU is selected. The resulting image runs on the secondary Cortex-M4 core. This core has equally access to all peripherals as the main Cortex-A5 core. However, there is no resource control mechanism, hence when both cores are used simultaneously, orthogonal device tree's are required. The boot CPU is dependent on the SoC variant. The available boards use mostly variants where the Cortex-A5 is the primary and hence the boot CPU. Booting the secondary Cortex-M4 CPU needs SoC specific registers written. There is no in kernel support for this right now, a external userspace utility called "m4boot" can be used to boot the kernel: m4boot xipImage initramfs.cpio.lzo vf610m4-colibri.dtb Signed-off-by: Stefan Agner Signed-off-by: Arnd Bergmann

Documentation: DT: Add entry for FSL LS2085A SoC and Simulator model

2015-01-27T23:04:48Z

This patch adds a devicetree binding documentation for FSL's LS2085A SoC and Simulator model. Signed-off-by: Bhupesh Sharma Signed-off-by: Olof Johansson

ARM vf610: add compatibilty strings of supported Vybrid SoC's

2015-01-05T12:53:05Z

The Vybrid SoC family (in the kernel known as vf610) is a familiy of multiple similar SoC's. The VF5xx series comes without secondary Cortex-M4 core, while the second number VFx1x indicates the presence of a L2 cache controller. Signed-off-by: Stefan Agner Signed-off-by: Shawn Guo

dt-bindings: arm: add Freescale LS1021A SoC device tree binding

2014-11-23T07:08:09Z

Signed-off-by: Jingchang Lu Signed-off-by: Shawn Guo

ARM: mx25pdk: Add device tree support

2013-02-10T15:25:42Z

Add basic device tree support for mx25pdk board. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo

ARM: boot: dts: Add an entry for imx27-pdk.dtb

2013-02-10T15:25:41Z

Add an entry for imx27-pdk.dtb, so that it can be generated by default. Also, add an entry into Documentation/devicetree/bindings/arm/fsl.txt. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo

ARM: dts: imx6q-sabreauto: Add basic support

2012-11-16T06:18:52Z

mx6qsabreauto is a board based on mx6q SoC with the following features: - 2GB of DDR3 - 2 USB ports - 1 HDMI output port - SPI NOR - 2 LVDS LCD ports - Gigabit Ethernet - Camera - eMMC and SD card slot - Multichannel Audio - CAN - SATA - NAND - PCIE - Video Input Add very basic support for it. Signed-off-by: Fabio Estevam Signed-off-by: Shawn Guo

Merge branch 'imx/dt/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6.git into next/dt2

2012-05-14T13:28:19Z

Shawn Guo writes: I chose to base it on Sascha's imx-common-clk series than -rc, because otherwise it will keep patching clock file that has been removed by imx-common-clk series. It also depends on imx-pinctrl pull-request I just sent to be functional. Note: when imx-common-clk and imx-pinctrl get merged together, the following files will have conflicts. But the conflicts should not be so hard to resolve. [arnd: resolved those merge conflicts by pulling pinctrl branch] * imx/dt: (24 commits) ARM: dts: imx53-qsb: enable audio support ARM: dts: imx51-babbage: enable audio support ARM: imx: add audio codec clk lookup for imx53-qsb ARM: imx: add audmux pad setting for imx51-babbage ARM: imx: add more imx5 ssi clocks ARM: dts: imx53-qsb: Add Dialog DA9053 PMIC support ARM: dts: imx6q-sabrelite: add serial2 pinctrl support ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000 ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000 ARM: imx6q: add ssi1_ipg clk_lookup ARM: dts: imx6q-sabrelite: add audmux pinctrl support ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support ARM: dts: imx6q-sabrelite: add audmux device ARM: dts: imx6q-sabrelite: add ssi device ARM: dts: imx6q-arm2: add pinctrl state for usdhc ARM: imx6: Add UART2 for low-level debug ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled ARM: imx6q: move imx6q_sabrelite specific code to a dedicated function ARM: dts: imx6q-sabrelite: Add SPI NOR support ARM: dts: Add basic support for imx6q-sabresd ... Pulls in imx/pinctrl and imx/clock as dependencies. Signed-off-by: Arnd Bergmann

ARM: mxs: add initial device tree support for imx23-evk board

2012-05-12T05:32:17Z

It adds initial device tree support for imx23-evk board, and only serial console is enabled. Signed-off-by: Shawn Guo Acked-by: Marek Vasut

ARM: mxs: add initial device tree support for imx28-evk board

2012-05-12T05:32:16Z

This patch includes basic dt support which can boot via nfs rootfs. Signed-off-by: Dong Aisheng Signed-off-by: Shawn Guo Acked-by: Marek Vasut