kernel/Documentation/devicetree/bindings/arm/amlogic.yaml, branch linux-6.2.y

dt-bindings: amlogic: document Odroid Go Ultra compatible

2022-11-21T10:51:56Z

This documents the Odroid Go Ultra, a portable gaming device, with the following characteristics: - Amlogic S922X SoC - RK817 & RK818 PMICs - 2GiB LPDDR4 - On board 16GiB eMMC - Micro SD Card slot - 5inch 854×480 MIPI-DSI TFT LCD - Earphone stereo jack, 0.5Watt 8Ω Mono speaker - Li-Polymer 3.7V/4000mAh Battery - USB-A 2.0 Host Connector - x16 GPIO Input Buttons - 2x ADC Analog Joysticks - USB-C Port for USB2 Device and Charging Acked-by: Rob Herring Link: https://lore.kernel.org/r/20221031-b4-odroid-go-ultra-initial-v2-1-a3df1e09b0af@linaro.org Signed-off-by: Neil Armstrong

Merge tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2022-10-10T20:13:51Z

Pull devicetree updates from Rob Herring: "DT core: - Fix node refcounting in of_find_last_cache_level() - Constify device_node in of_device_compatible_match() - Fix 'dma-ranges' handling in bus controller nodes - Fix handling of initrd start > end - Improve error reporting in of_irq_init() - Taint kernel on DT unittest running - Use strscpy instead of strlcpy - Add a build target, dt_compatible_check, to check for compatible strings used in kernel sources against compatible strings in DT schemas. - Handle DT_SCHEMA_FILES changes when rebuilding DT bindings: - LED bindings for MT6370 PMIC - Convert Mediatek mtk-gce mailbox, MIPS CPU interrupt controller, mt7621 I2C, virtio,pci-iommu, nxp,tda998x, QCom fastrpc, qcom,pdc, and arm,versatile-sysreg to DT schema format - Add nvmem cells to u-boot,env schema - Add more LED_COLOR_ID definitions - Require 'opp-table' uses to be a node - Various schema fixes to match QEMU 'virt' DT usage - Tree wide dropping of redundant 'Device Tree Binding' in schema titles - More (unevaluated|additional)Properties fixes in schema child nodes - Drop various redundant minItems equal to maxItems" * tag 'devicetree-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (62 commits) of: base: Shift refcount decrement in of_find_last_cache_level() dt-bindings: leds: Add MediaTek MT6370 flashlight dt-bindings: leds: mt6370: Add MediaTek MT6370 current sink type LED indicator dt-bindings: mailbox: Convert mtk-gce to DT schema of: base: make of_device_compatible_match() accept const device node of: Fix "dma-ranges" handling for bus controllers of: fdt: Remove unused struct fdt_scan_status dt-bindings: display: st,stm32-dsi: Handle data-lanes in DSI port node dt-bindings: timer: Add power-domains for TI timer-dm on K3 dt: Add a check for undocumented compatible strings in kernel kbuild: take into account DT_SCHEMA_FILES changes while checking dtbs dt-bindings: interrupt-controller: migrate MIPS CPU interrupt controller text bindings to YAML dt-bindings: i2c: migrate mt7621 text bindings to YAML dt-bindings: power: gpcv2: correct patternProperties dt-bindings: virtio: Convert virtio,pci-iommu to DT schema dt-bindings: timer: arm,arch_timer: Allow dual compatible string dt-bindings: arm: cpus: Add kryo240 compatible dt-bindings: display: bridge: nxp,tda998x: Convert to json-schema dt-bindings: nvmem: u-boot,env: add basic NVMEM cells dt-bindings: remoteproc: qcom,adsp: enforce smd-edge schema ...

dt-bindings: arm: amlogic: add Beelink GT1 Ultimate binding

2022-09-05T07:25:59Z

Add the board binding for the Shenzen AZW (Beelink) GT1 Ultimate Android Set-Top Box device. Signed-off-by: Christian Hewitt Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220707093954.21716-1-christianshewitt@gmail.com

dt-bindings: Remove 'Device Tree Bindings' from end of title:

2022-08-25T19:06:57Z

As indicated in link: https://lore.kernel.org/all/20220822204945.GA808626-robh@kernel.org/ DT schema files should not have 'Device Tree Binding' as part of there title: line. Remove this in most .yaml files, so hopefully preventing developers copying it into new .yaml files, and being asked to remove it. Signed-off-by: Andrew Lunn Link: https://lore.kernel.org/r/20220825020427.3460650-1-andrew@lunn.ch Signed-off-by: Rob Herring

dt-bindings: arm: amlogic: add bindings for Jethub D1p (j110)

2022-08-16T12:19:48Z

JetHome JetHub D1p is a home automation controller, modification of JetHub D1 based on Amlogic A113X Signed-off-by: Vyacheslav Bocharov Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220811103113.3097868-3-adeep@lexina.in

dt-bindings: arm: amlogic: add Vero 4K+ bindings

2022-02-21T08:23:08Z

Add the board binding for the OSMC Vero 4K+ STB device Signed-off-by: Christian Hewitt Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220211105311.30320-3-christianshewitt@gmail.com

dt-bindings: arm: amlogic: add H96-Max bindings

2022-01-12T08:24:42Z

Add the board binding for the Haochuangyi H96-Max STB device. Signed-off-by: Christian Hewitt Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112022713.25962-9-christianshewitt@gmail.com

dt-bindings: arm: amlogic: add A95XF3-AIR bindings

2022-01-12T08:24:41Z

Add board bindings for the CYX A95XF3-AIR set-top box which ships with model variants distinguished by Ethernet configuration: models using external Gigabit PHY have a -gbit suffix, while models using an internal 10/100 PHY have no suffix. Signed-off-by: Christian Hewitt Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112022713.25962-6-christianshewitt@gmail.com

dt-bindings: arm: amlogic: add X96-AIR bindings

2022-01-12T08:24:41Z

Add board bindings for the Amediatech X96-AIR STB which ships with model variants distiguished by Ethernet configuration: models using an external Gigabit PHY have a -gbit suffix, while models using an internal 10/100 PHY have no suffix. Signed-off-by: Christian Hewitt Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220112022713.25962-3-christianshewitt@gmail.com

dt-bindings: arm: amlogic: add S4 based AQ222 bindings

2022-01-10T09:30:22Z

Add bindings for the new Amlogic S4 SoC family, and add binds the compatible for the Amlogic S4 Based AQ222 board. S4 is an application processor designed for hybrid OTT/IP Set To Box(STB) and high-end media box applications, with quad core Cortex-A35. Signed-off-by: Xianwei Zhao Acked-by: Rob Herring Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20211221030014.434-1-xianwei.zhao@amlogic.com