kernel, branch linux-6.0.y

Linux 6.0.19

2023-01-12T11:00:49Z

Link: https://lore.kernel.org/r/20230110180017.145591678@linuxfoundation.org Tested-by: Florian Fainelli Tested-by: Shuah Khan Tested-by: Jon Hunter Tested-by: Sudip Mukherjee Tested-by: Bagas Sanjaya Tested-by: Linux Kernel Functional Testing Tested-by: Justin M. Forbes Tested-by: Conor Dooley Tested-by: Guenter Roeck Signed-off-by: Greg Kroah-Hartman

drm/mgag200: Fix PLL setup for G200_SE_A rev >=4

2023-01-12T11:00:49Z

commit b389286d0234e1edbaf62ed8bc0892a568c33662 upstream. For G200_SE_A, PLL M setting is wrong, which leads to blank screen, or "signal out of range" on VGA display. previous code had "m |= 0x80" which was changed to m |= ((pixpllcn & BIT(8)) >> 1); Tested on G200_SE_A rev 42 This line of code was moved to another file with commit 877507bb954e ("drm/mgag200: Provide per-device callbacks for PIXPLLC") but can be easily backported before this commit. v2: * put BIT(7) First to respect MSB-to-LSB (Thomas) * Add a comment to explain that this bit must be set (Thomas) Fixes: 2dd040946ecf ("drm/mgag200: Store values (not bits) in struct mgag200_pll_values") Cc: stable@vger.kernel.org Signed-off-by: Jocelyn Falempe Reviewed-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20221013132810.521945-1-jfalempe@redhat.com Signed-off-by: Greg Kroah-Hartman

efi: random: combine bootloader provided RNG seed with RNG protocol output

2023-01-12T11:00:48Z

commit 196dff2712ca5a2e651977bb2fe6b05474111a83 upstream. Instead of blindly creating the EFI random seed configuration table if the RNG protocol is implemented and works, check whether such a EFI configuration table was provided by an earlier boot stage and if so, concatenate the existing and the new seeds, leaving it up to the core code to mix it in and credit it the way it sees fit. This can be used for, e.g., systemd-boot, to pass an additional seed to Linux in a way that can be consumed by the kernel very early. In that case, the following definitions should be used to pass the seed to the EFI stub: struct linux_efi_random_seed { u32 size; // of the 'seed' array in bytes u8 seed[]; }; The memory for the struct must be allocated as EFI_ACPI_RECLAIM_MEMORY pool memory, and the address of the struct in memory should be installed as a EFI configuration table using the following GUID: LINUX_EFI_RANDOM_SEED_TABLE_GUID 1ce1e5bc-7ceb-42f2-81e5-8aadf180f57b Note that doing so is safe even on kernels that were built without this patch applied, but the seed will simply be overwritten with a seed derived from the EFI RNG protocol, if available. The recommended seed size is 32 bytes, and seeds larger than 512 bytes are considered corrupted and ignored entirely. In order to preserve forward secrecy, seeds from previous bootloaders are memzero'd out, and in order to preserve memory, those older seeds are also freed from memory. Freeing from memory without first memzeroing is not safe to do, as it's possible that nothing else will ever overwrite those pages used by EFI. Reviewed-by: Jason A. Donenfeld [ardb: incorporate Jason's followup changes to extend the maximum seed size on the consumer end, memzero() it and drop a needless printk] Signed-off-by: Ard Biesheuvel Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

btrfs: make thaw time super block check to also verify checksum

2023-01-12T11:00:48Z

commit 3d17adea74a56a4965f7a603d8ed8c66bb9356d9 upstream. Previous commit a05d3c915314 ("btrfs: check superblock to ensure the fs was not modified at thaw time") only checks the content of the super block, but it doesn't really check if the on-disk super block has a matching checksum. This patch will add the checksum verification to thaw time superblock verification. This involves the following extra changes: - Export btrfs_check_super_csum() As we need to call it in super.c. - Change the argument list of btrfs_check_super_csum() Instead of passing a char *, directly pass struct btrfs_super_block * pointer. - Verify that our checksum type didn't change before checking the checksum value, like it's done at mount time Fixes: a05d3c915314 ("btrfs: check superblock to ensure the fs was not modified at thaw time") Reviewed-by: Johannes Thumshirn Signed-off-by: Qu Wenruo Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

ksmbd: check nt_len to be at least CIFS_ENCPWD_SIZE in ksmbd_decode_ntlmssp_auth_blob

2023-01-12T11:00:48Z

commit 797805d81baa814f76cf7bdab35f86408a79d707 upstream. "nt_len - CIFS_ENCPWD_SIZE" is passed directly from ksmbd_decode_ntlmssp_auth_blob to ksmbd_auth_ntlmv2. Malicious requests can set nt_len to less than CIFS_ENCPWD_SIZE, which results in a negative number (or large unsigned value) used for a subsequent memcpy in ksmbd_auth_ntlvm2 and can cause a panic. Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3") Cc: stable@vger.kernel.org Signed-off-by: William Liu Signed-off-by: Hrvoje Mišetić Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman

ksmbd: send proper error response in smb2_tree_connect()

2023-01-12T11:00:48Z

commit cdfb2fef522d0c3f9cf293db51de88e9b3d46846 upstream. Currently, smb2_tree_connect doesn't send an error response packet on error. This causes libsmb2 to skip the specific error code and fail with the following: smb2_service failed with : Failed to parse fixed part of command payload. Unexpected size of Error reply. Expected 9, got 8 Signed-off-by: Marios Makassikis Acked-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman

ksmbd: fix infinite loop in ksmbd_conn_handler_loop()

2023-01-12T11:00:48Z

commit 83dcedd5540d4ac61376ddff5362f7d9f866a6ec upstream. If kernel_recvmsg() return -EAGAIN in ksmbd_tcp_readv() and go round again, It will cause infinite loop issue. And all threads from next connections would be doing that. This patch add max retry count(2) to avoid it. kernel_recvmsg() will wait during 7sec timeout and try to retry two time if -EAGAIN is returned. And add flags of kvmalloc to __GFP_NOWARN and __GFP_NORETRY to disconnect immediately without retrying on memory alloation failure. Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers") Cc: stable@vger.kernel.org Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18259 Reviewed-by: Sergey Senozhatsky Signed-off-by: Namjae Jeon Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman

btrfs: handle case when repair happens with dev-replace

2023-01-12T11:00:48Z

[ Upstream commit d73a27b86fc722c28a26ec64002e3a7dc86d1c07 ] [BUG] There is a bug report that a BUG_ON() in btrfs_repair_io_failure() (originally repair_io_failure() in v6.0 kernel) got triggered when replacing a unreliable disk: BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3 kernel BUG at fs/btrfs/extent_io.c:2380! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2 Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021 Workqueue: btrfs-endio btrfs_end_bio_work [btrfs] RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs] Call Trace: clean_io_failure+0x14d/0x180 [btrfs] end_bio_extent_readpage+0x412/0x6e0 [btrfs] ? __switch_to+0x106/0x420 process_one_work+0x1c7/0x380 worker_thread+0x4d/0x380 ? rescuer_thread+0x3a0/0x3a0 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 [CAUSE] Before the BUG_ON(), we got some read errors from the replace target first, note the mirror number (3, which is beyond RAID1 duplication, thus it's read from the replace target device). Then at the BUG_ON() location, we are trying to writeback the repaired sectors back the failed device. The check looks like this: ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical, &map_length, &bioc, mirror_num); if (ret) goto out_counter_dec; BUG_ON(mirror_num != bioc->mirror_num); But inside btrfs_map_block(), we can modify bioc->mirror_num especially for dev-replace: if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 && !need_full_stripe(op) && dev_replace->tgtdev != NULL) { ret = get_extra_mirror_from_replace(fs_info, logical, *length, dev_replace->srcdev->devid, &mirror_num, &physical_to_patch_in_first_stripe); patch_the_first_stripe_for_dev_replace = 1; } Thus if we're repairing the replace target device, we're going to trigger that BUG_ON(). But in reality, the read failure from the replace target device may be that, our replace hasn't reached the range we're reading, thus we're reading garbage, but with replace running, the range would be properly filled later. Thus in that case, we don't need to do anything but let the replace routine to handle it. [FIX] Instead of a BUG_ON(), just skip the repair if we're repairing the device replace target device. Reported-by: 小太 Link: https://lore.kernel.org/linux-btrfs/CACsxjPYyJGQZ+yvjzxA1Nn2LuqkYqTCcUH43S=+wXhyf8S00Ag@mail.gmail.com/ CC: stable@vger.kernel.org # 6.0+ Signed-off-by: Qu Wenruo Signed-off-by: David Sterba Signed-off-by: Sasha Levin

virtio_blk: Fix signedness bug in virtblk_prep_rq()

2023-01-12T11:00:47Z

[ Upstream commit a26116c1e74028914f281851488546c91cbae57d ] The virtblk_map_data() function returns negative error codes, however, the 'nents' field of vbr->sg_table is an unsigned int, which causes the error handling not to work correctly. Cc: stable@vger.kernel.org Fixes: 0e9911fa768f ("virtio-blk: support mq_ops->queue_rqs()") Signed-off-by: Rafael Mendonca Message-Id: <20221021204126.927603-1-rafaelmendsr@gmail.com> Signed-off-by: Michael S. Tsirkin Reviewed-by: Stefano Garzarella Reviewed-by: Suwan Kim Reviewed-by: Stefan Hajnoczi Acked-by: Jason Wang Signed-off-by: Sasha Levin

virtio-blk: use a helper to handle request queuing errors

2023-01-12T11:00:47Z

[ Upstream commit 258896fcc786b4e7db238eba26f6dd080e0ff41e ] Define a new helper function, virtblk_fail_to_queue(), to clean up the error handling code in virtio_queue_rq(). Signed-off-by: Dmitry Fomichev Message-Id: <20221016034127.330942-2-dmitry.fomichev@wdc.com> Signed-off-by: Michael S. Tsirkin Stable-dep-of: a26116c1e740 ("virtio_blk: Fix signedness bug in virtblk_prep_rq()") Signed-off-by: Sasha Levin